Argos Wow Hygena Bay 457/6169 User manual

Wow Hygena Bay Bar Stool
Assembly Instructions - Please keep for future reference
Issue 1 - 09/10/15
Dimensions
Width - 39.5cm
Depth - 39.5cm
Height - 81cm
Important - Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline:
Argos = 0345 640 0800
457/6169
482/8697
460/6589
hygena

1
• Check you have all the
components and tools listed on
the following pages.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• During assembly do not stand
or put weight on the product, this
could cause damage.
• Assemble the item as close to
its final position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor.
• Parts of the assembly will be
easier with 2 people.
• We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
• Unit weight: 4.66 kgs.
• Maximum safe weight of user:
110kgs.
Safety and Care Advice
Important - Please read these instructions fully before starting assembly
Care and maintenance
Handy Hints
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• Do not stand on the product.
• Do not use this product as step
ladder.
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
• Assemble all parts and bolts
loosely during assembly, only
once the product is complete
should you fully tighten the
bolts.
• Regularly check and ensure
that all bolts and fittings are
tightend properly.

2
Components - Parts
Please check you have all the parts listed below
Seat
(39 x 38.5 x 16cm)
1Stretcher
(Ø36 x 1.8cm)
2Leg x 4
(Ø2.7/Ø4 x 69cm)
3
Components - Fittings
Please check you have all the fittings listed below
M7 x 40mm Bolt x 4 M5 x 30mm Screw x 4
Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings
may be supplied than are required.
A
D
Big allen key x 1
C
B
Small allen key x 1
If you have damaged or missing components, call the
Customer Helpline: Argos = 0345 640 0800
raised
Ruler - Use this ruler to help correctly identify the screws
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 110 115 120 125 130 135 140 145 150 155 160 165 170
105

3
Assembly Instructions
Attaching legs
Place the seat face
down on a flat and
protected surface.
While aligning the mount
pin to slot hole in the
seat, insert the legs
into holes on the seat as
shown.
Step 1
Step 2
Attaching stretcher
Position the stretcher
between the legs as
shown. Align holes and
fix using bolts .
Important:
Tighten bolts
using big allen
key but do not
fully tighten at
this stage.
mount
pin and
slot
1
1
2
3
31
3
3
3
3
3
3
3
2
2
3
3
3
A
A
A
A
A
A
C

4
Assembly Instructions
Securing the legs
Fix the legs to the
seat using bolts .
Tighten bolts using small
allen key .
Step 3
Step 4
Aligning legs
Carefully turn the bar
stool upright and place
on a flat surface.
Carefully make
adjustments to the leg
frame to ensure the legs
are flat even on the floor.
Then fully tighten bolts
on stretcher using allen
key .
Assembly is complete.
If you need help or have damaged or missing parts, call the Customer Helpline:
Argos = 0345 640 0800
1
3
B
B
B
B
B
A
C
B
D
C
1
1
3
3
3
3
3