Innodisk EMPS-32R1 User manual

www.innodisk.com
Headquarters (Taiwan)
5F., No. 237, Sec. 1, Datong Rd.,
Xizhi Dist., New Taipei City 221,
Taiwan
Tel: [phone]
Email: [email protected]
Branch Offices:
USA
[email protected]
[phone]
Europe
[email protected]
[phone]
Japan
[email protected]
[phone]
China
[email protected]
[phone]
www.innodisk.com
© 2016 Innodisk Corporation.
All right reserved. Specifications
are subject to change without
prior notice.
September 20, 2016
Mechanical Drawing
Specifications
Features
Form-
Factor
mPCIe
Input I/F
PCI Express
2.0
Output I/F
SATA
III
Output Connector
SATA
7pin x 2
TDP
1.98W (3.3V x 600mA)
Dimension (
WxLxH
)
Standard
Temp: 30 x 50.9 x 10.85 mm, Weight: 8.5g
Wide Temp:
30 x 50.9 x 10.85 mm, Weight: 8.5g
Temperature
Operation: STD: 0
°C ~ +70°C WT: -40°C ~ +85°C
Storage:
-55°C ~ +95°C
Environment
Vibration: 5G @7~2000Hz, Shock: 50G @ 0.5ms
Notes
1. RAID
Mode Setting:
[J3:J4]
RAID0: 2:1,
RAID1: 1:2, PM: 1:1
2.
Press tact switch SW1 for reset.
mPCIe to dual SATA III RAID Module
−mPCIe to dual SATA III ports.
−Low power consumption.
−Supports AHCI, Port-Multiplier.
−Supports Native Command Queuing
−Supports Hardware RAID 0, RAID1
−Supports wide temp
−30µ golden finger, 3 years warranty.
−Industrial design, manufactured in innodisk Taiwan
EMPS-32R1
Order information
EMPS-32R1-C1
mPCIe to dual SATA III RAID Module
EMPS-32R1-W1
mPCIe to dual SATA III RAID Module W/T
SATA III 7pin MALE
SW1
Standard Temp Wide Temp

www.innodisk.com
RAID Mode Setting
J3 J4
RAID 0 2 1
RAID 1 1 2
Port Multiplier
1 1
Installation Guide
Please connect SSD in EMPS-32R1 SATA
slot.
Please connect EMPS-32R1 to onboard
mPCIe slot.
Please use slide switch J3/J4 to change
RAID mode as above setting list.
Please push tact switch 3 seconds for
reset then check RAID menu in step 4
to see if it takes effect.
1 2
3
6
LED Assignment
Access
Green,
Bright blinking
Rebuild
Green,
Breath Light ( the
light gradually fade
-in back
and forth)
Press ‘Ctrl-r’ to enter RAID menu during
this scene.
You can config and check RAID status in
this RAID menu before installing OS.
4
5