Innodisk EMPV-1202 Installation and operating instructions

www.innodisk.com
EMPV-1202
mPCIe to VGA & 18/24 bit LVDS module
−VGA Output up to 1920x1080, up to 75Hz vertical rate
−LVDS resolution supports up to 1600 x 1200
−EMPV-1202-C1/W1 Support 18 bit panel and 24 bit
JEIDA LVDS
−EMPV-1202-C2/W2 Support 24 bit VESA LVDS
−Allow for 90º, 180º, and 270º rotation of on-screen
images.
−Optional Industrial Temperature (-40°C to +85°C)
support.
−30µ” golden finger, 3 years warranty.
−Industrial design. Manufactured in innodisk Taiwan.
40 Pin
(40DP-1.25)
VGA & LVDS
Power- in for
LVDS Panel
Form-
Factor
mini PCIe
Input I/F
PCI
Express 1.0
Output I/F
VGA, 18/24 bit LVDS (C1 for JEIDA, C2 for VESA)
Output Connector
40pin 1.25mm (40DP
-1.25)
TDP
1.98W(3.3V
x 600mA)
Dimension (
WxLxH
)
50.95 x 30 x 8.2 mm,
Weight: 8.5g
Temperature
Operation: STD: 0
°C ~ +70°C WT: -40°C ~ +85°C
Storage:
-55°C ~ +95°C
Environment
Vibration: 5G @7~2000Hz, Shock: 50G @ 0.5ms
Notes
Need to connect external 5V power for LVDS panel.
OS Support : Windows XP (32 bit), Windows 7 (32/64 bit),
Windows 8 (64 bit), Linux Ubuntu 12.10(64 bit), Linux
Fedora 18, Linux
RedHat Enterprise 6.3.
Please download driver from
Myinnodisk website.
5V
GND
Headquarters (Taiwan)
5F., No. 237, Sec. 1, Datong Rd.,
Xizhi Dist., New Taipei City 221,
Taiwan
Tel: [phone]
Email: [email protected]
Branch Offices:
USA
[email protected]
[phone]
Europe
[email protected]
[phone]
Japan
[email protected]
[phone]
China
[email protected]
[phone]
www.innodisk.com
© 2015 Innodisk Corporation.
All right reserved. Specifications
are subject to change without
prior notice.
December 8, 2016
Mechanical Drawing
Specifications
Features
Order information
EMPV-1202-C1(Standard Temp.)
EMPV-1202-W1(Wide Temp.)
mPCIe to VGA & 18 bit panel and 24 bit JEIDA LVDS format module
EMPV-1202-C2(Standard Temp.)
EMPV-1202-W2(Wide Temp.)
mPCIe to VGA & 24 bit VESA LVDS format module
Standard Temp Wide Temp

Data Mapping Diagram
EMPV-1202-C1, 18 Bit
EMPV-1202-C1, JEIDA LVDS, 24 Bit
EMPV-1202-C2, VESA LVDS, 24 Bit
EMPV-1202
mPCIe to VGA & 18/24 bit LVDS module

Display resolution
Please see below table for EMPV-1202 support list of display resolution.
Clone mode Extend mode
WIN7 WIN8 WIN 10 WIN7 WIN8 WIN 10
Color
60HZ
16bit 32bit 32bit 32bit 16bit 32bit 32bit 32bit
640x480 v v v v v v v v
800x600 v v v v v v v v
1024x600
v v v v v v v v
1024x768
v v v v v v v v
1280x720
v v v v v v v v
1280x800
v v v v v v v v
1280x1024
v v v v v
1360x768
v v v v v
1440x900
v v v v v
1440x960
v v v v v
1600x1200
v v v v v
1680x1050
v v v v v
1920x1080
v v v v v
Pin assignment
Signal Name
Pin #
Pin #
Signal Name
NC 51 52 +3.3V
NC 49 50 GND
NC 47 48 NC
NC 45 46 NC
GND 43 44 NC
+3.3V 41 42 NC
+3.3V 39 40 GND
GND 37 38 NC
GND 35 36 NC
PERP0 33 34 GND
PERN0 31 32 NC
GND 29 30 NC
GND 27 28 NC
PETP0 25 26 GND
PETN0 23 24 +3.3V
GND 21 22 PERST#
NC 19 20 NC
NC 17 18 GND
GND 15 16 NC
REFCLK+ 13 14 NC
REFCLK- 11 12 NC
GND 9 10 NC
GND 7 8 NC
NC 5 6 NC
NC 3 4 GND
NC 1 2 +3.3V
Device I/F: mPCIEOutput I/F: LVDS & VGA
EMPV-1202
mPCIe to VGA & 18/24 bit LVDS module
Signal Name
Pin#
Pin#
Signal Name
+5V 2 1 +3.3V
+5V 4 3 +3.3V
I2C_DATA 6 5 I2C_CLK
GND 8 7 GND
LVDS_D0+ 10 9 LVDS_D1+
LVDS_D0- 12 11 LVDS_D1-
GND 14 13 GND
LVDS_D2+ 16 15 LVDS_D3+
LVDS_D2- 18 17 LVDS_D3-
GND 20 19 GND
R_0 22 21 B_0
G_0 24 23
GND 26 25 GND
H_Sync 28 27 DDC_SCL
V_Sync 30 29 DDC_SDA
GND 32 31 GND
LVDS_CLK+ 34 33
LVDS_CLK- 36 35
GND 38 37 GND
40 39

www.innodisk.com
Installation Guide
Please connect power cable and LVDS cable
to monitor in EMPV-1202 slot.
Please press “Delete” to enter BIOS setting
then select “IGD” in primary display, and
make sure “PCIe” display is available.
Please install driver. Please restart system when installation
accomplish.
1
3 4
5
Enter “Device Manager“ “Display adapters”,
to check driver install status.
“Silicon Motion SM718/SM750“(Under WinXP)
“SM750 Family-Silicon Motion-WDDM”(Under Win7)
“SiliconMotion WDDM Display”(Under Win8)
EMPV-1202 has completed the setting for
multiple display.
2
6
EMPV-1202
mPCIe to VGA & 18/24 bit LVDS module