Innova Fitness Twister User manual

USER MANUAL / MANUAL DE USUARIO / MANUAL DE USUÁRIO / MAN-
UEL DE L'UTILISATEUR / MANUALE DELL'UTENTE / BENUTZERHAN-
DBUCH / GEBRUIKRERSHANDLEIDING -
SW/20
Innova Smart Watch
Fitness Twister
Descarga la APP en: Descarga la APK en:

ENGLISH
Thank you for using our smart watch INNOVA.
Important! The data provided by the smart watch, such as
heart rate, blood oxygen and blood pressure, are merely indi-
cative, it is not an exact medical measuring device.
Even if you are well, go to all the appointments scheduled by your
doctor.
Recommendations for people with sensitive skin
during use of electronic wrist devices, Smartwatch
and Smartband.
The materials used for our INNOVA Smartwatches and Smart-
bands are selected following a rigorous control of hypoallergenic
measures, as well as guaranteeing that all materials comply with
current regulations for materials in contact with the skin.
A small number of people, however, may experience some type of
skin reaction.
If you suspect, or know, that you are allergic or have an above
average sensitive skin type, you should monitor the use of these
devices for any type of reaction due to said allergies, environmen-
tal factors or prolonged exposure to irritants, like soap, sweat, or
other causes.
Smartwatches and Smartbands may contain materials such as
nickel and acrylates which, even though they are within the per-
mitted amounts in the manufacturing process, may cause skin to
react if you are sensitive to them.
If you use these devices for a prolonged period of time, you may
be more susceptible to developing skin sensitivities. To avoid
possible skin irritations we recommend you do not expose the
device to chemicals or use it if your skin has, or has been recent-
ly applied with, any of the products listed below:
• Insect repellents
• Moisturizing creams and lotions
• Oils
• Perfumes

ENGLISH
• Antiseptic gels
• Soaps
• Sun protection creams
It is recommended that the devices are used when the skin
is completely dry and free of any of the aforementioned products
to avoid having charging contacts and measurement sensors in
contact with wet skin. They are not submersible or waterproof.
Clean the device thoroughly to remove sweat after training and
allow it to dry. Prolonged exposure to moisture can cause skin
irritation.
It is also advisable not to wear these devices too tight or too loose.
If the strap is too tight, it may cause skin irritation. If the strap is
too loose, chafing may occur.
The watch strap should be left so that it can move slightly back
and forth on the wrist.
If you wear the device for prolonged periods of time, remove it to
give your skin a rest. To avoid irritation, swap the device to your
other wrist.
If you notice redness, swelling, itching or any other irritation, remo-
ve the Smartwatch immediately and consult your physician before
using the device again.
Special attention must be paid to the use of these
devices in places with relatively low humidity con-
ditions.
When using the Smartwatch/Smartband in places with low relative
humidity (dry/poorly ventilated places, low humidity atmospheric
conditions, dry indoors, if heating or air conditioning is always on,
etc.), as with any other electronic device, it may be affected by
charges of static electricity on rare but certain occasions. This
may cause damage to the device and also to the person wearing
it at that time. Static electricity is everywhere.
It surrounds us without us perceiving it.
An effective trick to avoid a high percentage of static electricity at

home:
• Use a humidifier. Humidity is a good conductor of electricity
therefore, by maintaining an acceptable percentage of it, we
will avoid static in areas of the home where we metal objects
may be found. Small containers of water on top of radiators is
another alternative solution.
The use of the devices in bed, whilst sleeping, is especially dis-
couraged for children and the elderly due to the fact that repeated
movements during the night may cause, through friction with
sheets, blankets, etc. a charge of static electricity. This may result
in a sudden discharge of the watch’s battery and/or heating of
same as the human body is a conductive element and can cause
a reaction to people with sensitive skin, redness, irritation, etc.
If you notice redness, swelling, itching, or any other form of irrita-
tion, remove the Smartwatch immediately and consult your physi-
cian before using the device again in case you are suffering from
any type of reaction, allergic or otherwise.
INNOVA CELLULAR.
Before using the device please read this instruction manual in its
entirety.
Wearing
Place the bracelet on your wrist, and adjust the strap for a comfor-
table wear, ensuring the sensor is in contact with your skin. If the
sensor is not in contact with your skin, the measurements will
not be accurate.
Charging
Before using the device for the first time, please ensure the battery
is charged. If the device does not turn on, please connect it to the
battery charger for it to activate.
ENGLISH

ENGLISH
Pairing device to phone
IMPORTANT!
Please do not pair your device directly to your phone’s Blue-
tooth. If you have already done this, please remove it from
“paired devices” as it will prevent its connection to the application.
1.Download the application Smart Bracelet Fit Pro from Google
Play Store / Apple Store or, alternatively, scan the following QR
Code and install it.
Minimum System requirements: Android 5.0; iOS9; Bluetooth 4.2
2. Open the application and grant all access requests.
Fit Pro
3. To finish pairing, press the
“Set” icon and then press
“Bind devices to…” banner
(highlighted). You will then find
“SW-20” which, once selected,
will pair to your phone.

ENGLISH
The watch should now show local date and time and the top
of the application should appear as follows:
From “Message Push” you can set up the APPS from which you
wish to receive information on your device (Calls, WhatsApp,
Facebook, Twitter, etc.).
Restarting and/or removing the device will cause data to be
deleted.
4. In the “Step” icon you can view your daily steps and your set
SW-20 (BA:3C)
objectives / targets. Fur-
ther below, you can also
view a summary of the
distance walked as well as
other information such as
your heart rate and/or
sleeping patterns.
If you press on the infor-
mation displayed, another
screen will open, and you
can start measuring your
heart rate or see the
details of your sleeping
habits. At the bottom you
will find “Healthy habit” in
which you can specify
“eat breakfast”, “go to bed
early”, etc.

5. Within “Motion” you will
find different options such
as “walk”, “run” or “bike”.
Pressing “Start” and
having your GPS activated,
you can see the distances
achieved as well as the route.
To stop swipe the lower bar to
the right and press “End”.
To see the route, press the
gear icon.
ENGLISH
6. Press “Mine” to view details of
different data, a summary of
your activities and, in “User
Profile”, establish your personal
information (sex, age, height,
etc.).

ENGLISH
Function description
- Power on : Long press lateral button
- Long press the home button to switch off the device
- To navigate swipe up and down or left and right to scroll through
the main menu and dial.
- Swipe left and right from the homepage to go to step count, heart
rate measurement & APP QR code.
- On standby long press the screen for 2 seconds to switch bet-
ween different dials.
- To select a watch face, long press and apply.
- The reset device feature clears all data in the fitness tracker and
restore factory setting.
- To start any function enter the interface screen and wait for 60
seconds to start the count.
- For eg. to start the three-in-one HR BP and Blood oxygen count,
swipe to the screen and wait for few seconds, the count will start
automatically
Interfaces
Tracks Step: This interface is to track no of step, distance
travelled and calorie burned.
- Number of steps: Wear the watch and record the number of steps
you take real-time steps.
- Distance: The distance of motion is estimated based on the on
the number of walking steps.
- Calorie: Estimate the calories burnt based on the number of
walking steps.
Health: This interface is to track HR, BP and Blood oxy-
gen level after swiping to the “health” interface for a few se-
conds, the current heart rate, blood pressure and blood oxygen

ENGLISH
level results will be displayed on the screen.
Multiple sports mode: This interface is to track
and monitor physical activity and work outs through the 11
predefined sports mode you can monitor your work outs
accurately and keep a check on your calorie burnt.
Information mode: The watch is capable of pushing
multiple reminder messages, and notifications.
Incoming call alert
In the connected state, if the call alert function is enabled, for inco-
ming calls the watch will vibrate and display the name or number
of the caller
SMS Notifications
In the connected state, if the SMS reminder function is enabled,
the watch will vibrate when there is a text message.
Other Notifications
In the connect state, if this function is enabled, for any notifications
and message on Whatsapp, Instagram, Facebook, etc. The watch
will vibrate to remind and display the message.
P.S.
You can view the last three message / notifications from the menu.
You need to give the APP permission to get system notification.
The watch can display up to 40 words only.
APP function and settings
Personal information
To setup personal information, go to setting and set your personal
information like name, gender, age, height and weight.
You can also set your daily goal and steps to monitor your daily
activity
Sleep mode
When you fall asleep, the watch will automatically enter the sleep
mode and will automatically detect and monitor your sleep pattern
(deep sleep / shallow sleep / wake up) all night to accurately
calculate your sleep quality

ENGLISH
P.S
- Sleep data can be seen from the watch or APP
- Weareing the watch to sleep is must to track sleep pattern.
- Sleep mode will get activated at 10 pm
Alarm setting
In the connect state, 8 alarms can be set. After setting the alarm,
it will be synchronized to the watch.
After syncing the alarm with the watch through the app, it will func-
tion even if the watch is not connected to the app.
Remote photography
In the connected state, start the photo from the watch or the APP
to enter the remote camera interface. Shake the watch to remotely
click photo automatically. Please allow the APP to access the pho-
to album to save the clicked photo.
Sedentary reminder
By setting the sedentary reminder function, you can choose to get
reminded by the watch to move around when you are setting for
a longer time.
Find your watch function
In the connected state, click the “Find My Watch” option and the
watch will vibrate.
Raise your hand to switch-on
On standby when you lift your wrist and turn the screen, it lights up
coming out sleep mode
Do not disturb mode
Turn on the do not disturb mode. You can set the do not disturb
time period. During the set time period, the watch stop receiving
notification and messages.
Device reset
This feature resets the watch to factory setting and erase all the
previous data / information.
Remove device
This feature will erase data from the app and remove the
device.

ENGLISH
Other information
When there is a call, message or other reminder the watch
will vibrate.
P.S.
- Turn on vibration to set this function
- If the vibration feature is switched off, the watch will only show re-
minder on the screen without shaking to avoid any disturbance.
Tips for Android users:
When using the reminder function, you need to set it to allow
“FitPro” to run in background. It is recommended to add “FitPro” to
the rights management and allow all permissions.
Precautions
- The watch remain connected with the APP at all times to continue
to sync data.
- Use the original charging cable provided in the packaging only to
charge your watch
- Do not expose the watch to high moisture, high temperature or
very low temperatures for a long duration of time.
- Do not expose the watch at extreme temperatures, the batteries
could exploit.
- If the watch appears to crash and restart, please check the phone
memory information to clear space or exit the APP and reopen to
reconnect it again.
- The watch is not waterproof
Features
Step / Distance / Calories / Heart rate / Blood pressure / Oxygen
saturation / Sleep monitoring / Alerts (call, sms, Whatsapp....) /
Alarm clock / Sedentary reminder / Differents exercise mode / Turn
the wrist and shine the screen / Find watch / Remote photography /
Rejection of calls / Compatible with iOS 9.0 and above, Android
5.0 and above / Battery capacity: 150 mah (Up to 7 days (depend
of the use)) / Splash resistant (NO WATERPROOF) / Bluetooth
frequency band: 2.4 Ghz / Maximum emitted RF power < 100 mW

ENGLISH
Customer Service
Only in English or Spanish
Servicio de atención al cliente / Customer Service:
[phone]
Horario de atención al cliente:
De lun. a Jue. de 08:00 a 14:00 y de 15:30 a 17:30 y los Vier.
de 09:00 a 14:00
Working hours: Mon to Thu from 08:00 to 14:00 and from
15:30 to 17:30 and Fri. from 09:00 to 14:00
[e-mail]
Declaration of conformity
Through this INNOVA CELLULAR, it declares that the
INNOVA SMART WATCH FITNESS TWISTER (SW/20 (Y77
360CH SENA)) complies with the essential requirements and any
other applicable or enforceable provisions of Directives
2014/53/UE (RED) and RoHS 2011/65/EU annex II amending
annex (EU) 2015/863 and amended by Directive (EU) 2017/2102,
of the European Parliament and of the Council, transposed to
Spanish legislation through Royal Decree 188/2016, of May 6,
2016. To see the complete declaration of conformity, you can
access it through the following link:
http://www.innovacelular.com/images/web/descargas/
descargas/declaracion/declaracion_sw-20.pdf

GUARANTEE
DEVICE
ITEM: ___________________________________
Serial number: ________________________________
ESTABLISHMENT
Purchase date: ___________________________
[phone]
INNOVA CELULAR SL
C/ Severo Ochoa Nº 9 nave 8B
28521 Rivas-Vaciamadrid
Madrid
Establishment signature
Guarantee
ENGLISH
NOTE: The INNOVA SMART WATCH FITNESS TWISTER
(SW/20 (Y77 360CH SENA)) has a two-year warranty from the
date of purchase, except for parts with wear and tear, such as
batteries, they have a 6-month warranty from the date of
purchase.

ESPAÑOL
Gracias por usar nuestro smart watch INNOVA.
Importante! Los datos proporcionados por el smart watch,
tales como la frecuencia cardiaca, el oxígeno en sangre y la
presión arterial, son meramente orientativos, no se trata de
un aparato médico de medición exacta.
Aunque se encuentre bien acuda a todas las citas que su medico
le programe.
Recomendaciones para el uso de dispositivos
electrónicos de muñeca, Smartwatch y Smartband
para personas con pieles sensibles.
Los materiales de nuestros dispositivos, smartwatch y smartbands
INNOVA son seleccionados siguiendo un riguroso control de me-
didas hipo alergénicas, además de garantizar que todos los mate-
riales cumplen la normativa vigente para materiales en contacto
con la piel.
No obstante un pequeño número de personas pueden experimen-
tar algún tipo de reacción cutánea.
Si Vd. Sospecha o sabe que es alérgico o tiene un tipo de piel
más sensible de lo normal, debe de controlar el uso de estos dis-
positivos por si le produjera algún tipo de reacción debido a aler-
gias, factores medioambientales, una exposición prolongada a
irritantes, como el jabón o el sudor, u otras causas.
Los smartwatch y smartbands pueden contener materiales como
el Níquel y Acrilatos que aun siendo en cantidades permitidas en
el proceso de su fabricación, en caso de ser sensible a los mis-
mos podría padecer algún tipo de reacción cutánea.
Si usa Vd. este tipo de dispositivos durante un
tiempo prolongado, es más susceptible de
desarrollar sensibilidades cutáneas con el tiempo.
Para evitar posibles irritaciones de la piel, te recomendamos que
no expongas el dispositivo a los productos químicos y no lo use si
su piel tiene o ha usado recientemente alguno de los produc-
tos que se indican a continuación:

ESPAÑOL
• Repelentes de insectos
• Cremas y lociones hidratantes
• Aceites
• Perfumes
• Geles antisépticos
• Jabones
• Cremas de protección solar
Se recomienda usar los dispositivos cuando la piel este completa-
mente seca y libre de cualquier producto de los antes citados para
evitar que los contactos de carga de los mismos y sensores de
medición, estén en contacto con la piel demasiado húmeda, po-
niendo especial atención en los dispositivos que no son sumergi-
bles ni resistentes al agua.
Limpie bien el dispositivo y deje que se seque bien para eliminar
el sudor después de entrenar.
La exposición prolongada a la humedad puede provocar irritación
en la piel.
También es recomendable no usar estos dispositivos demasiado
apretado o demasiado suelto.
Si la correa está muy apretada, también puede irritar la piel. Si la
correa está muy suelta, se pueden producir rozaduras.
La correa del reloj debe dejarse lo suficientemente suelta para
que pueda moverse ligeramente hacia
delante y hacia atrás en la muñeca.
Si lleva puesto el dispositivo durante mucho tiempo, quíteselo pa-
ra que descanse la piel. Para evitar que se produzca irritación,
puede cambiarse el dispositivo de muñeca.
Si nota rojeces, hinchazón, picor o alguna otra irritación, quítese
el smartwatch inmediatamente y consulte con el médico antes de
volver a usar el dispositivo.
Especial atención debe de tenerse con el uso de
estos dispositivos en lugares con condiciones de
humedad relativamente bajas.
Cuando se usan Smartwatch/Smartband en lugares con humedad

relativa baja ( lugares secos, poco ventilados, condiciones
atmosféricas de baja humedad, sequedad del aire en interio-
res si tenemos la calefacción o el aire acondicionado siem-
pre encendidos. etc…. ) como cualquier dispositivo electró-
nico puede verse afectado por cargas de electricidad electroes-
tática en inusuales pero determinadas ocasiones y producir daños
en el dispositivo y asì mismo en la persona que lo use en ese
momento. La electricidad estática está en todas partes. Nos rodea
y ni siquiera la percibimos.
Un truco efectivo para evitar un alto porcentaje de electricidad
estática en casa:
• Tener un humidificador. La humedad es un buen conductor de la
electricidad, por lo que manteniendo un porcentaje aceptable de
ésta, evitaremos la estática en otros rincones de nuestra casa
donde tengamos objetos de metal. Unos pequeños recipientes
con agua encima de los radiadores son otra solución alternativa.
Se desaconseja especialmente el uso de los dispositivos en la
cama mientras se duerme, en niños y personas de edad avanza-
da, debido a que los repetidos movimientos durante la noche,
pueden provocar mediante fricción con sábanas, mantas, etc…
una carga de electricidad electroestática, que derive en una des-
carga repentina de la batería del reloj con un calentamiento del
mismo durante ese proceso debido al cuerpo humano como ele-
mento conductor y puede ocasionar en personas con pieles sen-
sibles , rojeces, irritaciones, etc…….
Si nota rojeces, hinchazón, picor o alguna otra irritación, quítese
el smartwatch inmediatamente y consulte con el médico antes de
volver a usar el dispositivo por si se debiera a cualquier tipo de
reacción alérgica u otro tipo de reacción.
INNOVA CELULAR.
ESPAÑOL

ESPAÑOL
Antes de usar el reloj, por favor lea atentamente esta
guía rápida.
Como colocárselo
La pulsera debe ir colocada por encima de la muñeca. Ajuste
la correa según el agujero de ajuste correspondiente. El sensor
debe quedar ajustado/pegado a la piel y no suelto.
Cargar la pulsera
Antes de usarlo por primera vez, asegúrese que la batería esté
cargada. Si no se enciende, conecte el cargador para cargar el
dispositivo y el reloj se encenderá.
Guía de vinculación
IMPORTANTE
Por favor no enlace el reloj al Bluetooth de su teléfono. Si ya
ha realizado esta operación, elimínelo del listado de dispositivos
vinculados al Bluetooth ya que esto impedirá la conexión a través
de la aplicación.
1. Descargue la aplicación Smart Bracelet Fit Pro desde Google
Play / Apple Store o escaneé el siguiente código QR e instálela
Requisitos de sistema: Android 5.0 o superior; iOS9 o superior;
Bluetooth 4.2
2. Autorice todos los permisos que solicita la aplicación.
3. Para enlazar el reloj con su teléfono pulse el icono “Ajuste” y,
después, en la parte superior (señalado), verá un texto indicán-
dole que vincule el dispositivo.
Púlselo.
Fit Pro

ESPAÑOL
Cuando encuentre su dispositivo SW/20, selecciónelo para que
quede vinculado al teléfono.
Aparecerá así en la parte superior de la APP (el código entre pa-
réntesis será distinto) y el reloj deberá mostrar la fecha y hora
local:
Desde “Mensaje Push” podrá establecer las APPS de las que
quiere recibir información en su reloj (WhatsAPP, Facebook,
Twitter, etc.).
Reiniciar y eliminar dispositivo es para realizar dichas acciones
con el reloj. Si elimina el dispositivo se borrarán los datos.
SW-20 (BA:3C)

4. En el icono “Paso” podrá ver los pasos dados y el objeti-
vo diario marcado. Debajo verá un resumen de la distancia,
etc. al igual que otras informaciones como el ritmo cardiaco
y el sueño (dormir). Si toca la información se abrirá otra
pantalla donde podrá comenzar a medir el ritmo cardiaco o ver
la calidad de sueño.
Si va más abajo en la pantalla verá “Hábito Saludable”. Aquí
puede indicar si ha desayunado o leído, entre otras actividades.
ESPAÑOL

5.En “Deportes” tiene dis-
tintas opciones como ca-
minar, correr o bicicleta.
Dándole a “iniciar”, y acti-
var GPS, podrá ver las distan-
cias recorridas y el trayecto.
Para parar deslice hacia la de-
recha, tal como se indica, y
pulse finalizar.
A través del engranaje podrá
ver el recorrido ya realizado.
ESPAÑOL
6. Dentro de “Mío” puede ver
los datos con los que ha
iniciado sesión (si se ha reali-
zado), un resumen de sus
actividades y, en “Perfil del
usuario” actualizar sus datos
personales.