INSE S10 User manual

Call us at 1-888-970-0050.
Our hours are 9 a.m. to 5 p.m. Monday - Friday.
S10 / S11 / S12 / S15 / S16 /
S17 / S18 / S19 / S10P / S10X /
S10P Rro / S100 / S150 / S160 /
S170 / S180 / S190

NOTE:
THIS WARRANTY TERM GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU
MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
12-month Warranty & Lifetime CustomerSupport
Only apply to eligible purchases made directly from the INSE authorized distributors. Warranty
coverage applies to the original owner and to the original product only and is not transferable.
How to initiate a warranty claim
If your appliance operates improperly while in use under normal household conditions within the
warranty period, please contact our customer support [[e-mail]] or
visit www.inselife.com to fill out the warranty form to initiate a warranty claim.
For more warranty details, please refer to www.inselife.com.
All rights are reserved by INSE official website.
Ready to Use Your Vacuum Cleaner?
Please read the attached user manual carefully before use.
Besides, you could get more operation guidance and maintenance tips
on INSE Youtube:
www.inselife.com
General tips, FAQ, etc
https://bit.ly/inse-s10-y2b
Installation videos
INSE CUSTOMER CARE
Your INSE vacuum cleaner enjoys a 12-month warranty. It will be
covered for all accessories for 12-month from the date of purchase.
If you have any questions about your INSE appliance, just contact
INSE Customer Support via the following channels:
You can reach the INSE customer support team at
Email: [email protected] with your order ID,
and details of the issue you met.
Hotline: call us at 1-888-970-0050.
Our hours are 9 a.m. to 5 p.m. Monday - Friday.
INSE Customer Support will help you solve the problem
quickly within 24 hours.

Power Adaptor Retractable Metal Tube
User Manual
VACUUMCLEANER
USER GUIDE
S10
Formore installation instructions,
pleaserefer to the User Manual.
HEPA
S10
Main Motor Metal Filter
corners
that are not easy to clean up
Retractable Metal Tube
Filter
Quick Start Guide

Speed regulation key
Key Function Board
Key Function Board
Lock key
1. Handle
2. Main Motor
3. Main Motor Release Button
4. Retractable Metal Tube
5. Metal Tube Release Button
6. LED Lights
7. Motorized Cleaner Head
8. Push Button
9. Dust Cup Open Button
10. Dust Cup Release Button
11. Battery Pack
12. Battery Locking Button
13. Power Switch
1
2
3
4
5
6
7
8
9
10
11
12
13
c
c
Gear indicator lamp
1. Insert the tube end into the cleaner head port until you hear a click, make
sure the connection is tight. And press the metal tube release button with one
hand, hold the tube with another hand and then pull it out to remove it.
2. Insert the metal tube end into the suction port of the main motor until you
hear a click, make sure the connection is tight. And press the main motor
release button with one hand, hold the main motor with another hand and then
pull the handle to remove the main motor from the tube.
① Retractable Metal Tube
② Motorized Cleaner Head
③ Main Motor
Hanging the whole machine
onto the wall bracket

2-1 Press the power switch to turn on the vacuum, second press to turn it off.
2-2 Press the button to switch the power mode between MIN, MID and MAX mode.
2-3 Press the power switch to turn on the vacuum, push the button, release the power
switch, the vacuum continues to work. Push the button again to turn the vacuum off.
The button has a lock function. Push it again and the lock function will be invalid.
Click
Click Click

10
4
LED1 LED3
LED2

Product Model S10
1L
350W
d

If the solutions cannot solve the problem, or the issue you met has not been listed, please feel
free to contact us via the following channels for further support:
Email: [e-mail] Website: www.inselife.com
or call our INSE hotline [phone].
Our hours are 9 a.m. to 5 p.m. Monday - Friday.
www.inselife.com
General tips, FAQ, etc
2. If they are too dirty, you could wash
the metal filter and the black mesh
with cool water, and clean the HEPA
with the cleaning brush.
1. Hold the main motor, press the button to open the dust bin cover，rotate the strainer
and filter one by one to take them out.（see as pictures below）
3. Ensure the strainer and the black
mesh are completely dry before
refitting.
1. Please check and clean the High-efficiency filter/HEPA regularly;
2. Please clean the filterin time if the suction performance decline;
3. Please replace the filter/HEPA if it's broken or it cannot maintain
the suction performance of the vacuum cleaner.
4. Pleasedo not bend or squeeze the HEPA.
https://bit.ly/inse-s10-y2b
Installation videos