Inseego MiFi X PRO 5G UW User manual

QUICK START GUIDE

Power button
Touchscreen
Battery cover
RJ45 Ethernet port*
USB-C port
*The 1Gbps Ethernet port is disabled by default to extend battery life. To enable it, select Enable Ethernet Port
from Menu > Settings on the touchscreen, or Settings > Preferences on the Admin web UI.
About your MiFi X PRO 5G UW

Home
Network Signal Strength
Data transferring between mobile network and MiFi
Roaming
Unread messages
MiFi Wi-Fi network
Connected devices
USB tethered
Battery fully charged
Battery critically low and MiFi will shut
down unless charged
MiFi connected to an AC charger and charging
MiFi connected via USB and charging
MiFi in Battery Preservation Mode
Ethernet port enabled
Status indicators

Setting up your MiFi X PRO 5G UW
Pre-installed 5G SIM
For optimal functionality of your new device, please use the pre-installed
SIM card.
Turning your MiFi on/off
Important: Before you use your MiFi, charge the battery for at least four
hours to ensure a full initial charge.
• To turn your MiFi on, press and hold the Power button for three
seconds.
• To turn it off, press and hold the Power button for three seconds until
you see the Powering Off screen. Then select Shutdown and tap OK.
• Press and release the Power button to wake up the display.
Setting up with the Inseego Mobile app
You can set up and manage your MiFi with the Inseego Mobile app:
1. Scan the QR code to install from AppStore or Google Play.
2. Follow the in-app instructions to set up your MiFi.
3. Use the app to configure and customize your MiFi.

Connecting to the internet
On your Wi-Fi capable device, open the list of available Wi-Fi networks.
Select the MiFi primary or guest network and enter the password.
Managing Wi-Fi networks and connections
Your MiFi X PRO 5G UW has two Wi-Fi networks, primary and guest, and
lets you connect up to 32 Wi-Fi capable devices. For added security,
share your guest network instead of your primary network.
The guest network is off by default. You can turn it on from either
the touchscreen or the Admin web UI by assigning it a band in Wi-Fi
Settings > Band Selection (see Accessing advanced settings).
Accessing advanced settings
You can access advanced settings and manage your MiFi from the
Admin web UI:
1. Connect your device to the primary network (see Connecting to the
internet).
Finding the Wi-Fi name and password
Tap Wi-Fi Name/Password on the Home screen.
The information for your primary network will be shown. Swipe left to
see the info for your guest network.

Resetting your MiFi
You can reset your Inseego MiFi to factory settings from the touchscreen
or from the Admin web UI.
NOTE: Resetting your MiFi will disconnect devices and reset network
names and passwords. To reset using the reset hole:
1. Make sure your MiFi is on.
2. Remove the battery cover from the back of your MiFi.
3. Insert an unfolded paper clip into the Reset hole and press until the
MiFi screen shows MiFi Resetting.
Reset hole
2. Open a web browser on your connected device and enter http://
my.jetpack or http://192.168.1.1.
3. Sign in with the Admin password. When you first get your MiFi X
PRO 5G UW, this is the same as your primary network’s password
(see Finding the Wi-Fi name and password).
Monitoring data usage
You can monitor your MiFi data usage and set up usage alerts through
your My Verizon account at verizon.com/MyVerizon.
You can also see current usage details on the Home screen of your MiFi,
or by tapping Menu > Data Usage.

My Verizon Mobile App
Manage your account, track your usage, edit account
information, pay your bill and more.
Get help using your MiFi
From your computer, visit verizonwireless.com/Support.
Customer service
Call 800.922.0204
Twitter @VZWSupport
More information
To access a User Guide, go to verizonwireless.com/Support
and find your device. Or, from the Admin web UI, select Help >
> Online Support > Device Support Page & User Guide.
PN 14965407-001 R1
© 2022 Inseego Corp. All Rights Reserved
Support and more
Additional information
Inseego Mobile app requirements
Smartphone or device on iOS 13 or above, or Android 9.0 or above.
System requirements
Any device with Wi-Fi capability and an internet browser.
Your MiFi X PRO 5G UW is compatible with all major operating systems and
Your wireless device and third-party services
Verizon Wireless is the mobile carrier associated with this wireless device, but many
services and features offered through this device are provided by or in conjunction
with third parties. Verizon Wireless is not responsible for your use of this device or
any non-Verizon Wireless applications, services and products, including any personal
information, you choose to use, submit or share with others. Specific third-party
terms and conditions, terms of use and privacy policies apply. Please review carefully
all applicable terms conditions and policies prior to using this wireless device and
any associated application, product or service.