insize ISM-DLC120 User manual

OPERATION MANUAL
ISM-DLC120
LCD Microscope

Manual
.ⅠThe description of digital LCD microscope……………………2
. The installation of digital LCD microscope……………………4Ⅱ
. The Application of digital LCD microscope……………………5Ⅲ
.ⅣThe maintenance of digital LCD microscope…………………14

.ⅠThe description of digital LCD microscope
1.1 Produce sketch figure
Fig.1-1 ISM-DLC120
1. Base 2. Focus adjusting hand wheel 3. Continual zooming 4. LED Ring lamp
5. Operation button layout 6. The liquid crystal display screen
The buttons on the operation button layout may be increased or decreased as
different function model.
1.2 The description of digital LCD microscope
The product is provided with an innovated concept, integrating scientifically the
LCD and the microscope. Along with the development in digital integration and the
popularization of the digital products, such a Digital LCD Microscope with LCD will be

used in the more extensive fields.
The digital LCD microscope is featured as comfortable in observation, simple in
operation, true in color and sharp in image, minimizing obviously the vision pressure,
reducing physiological reactions such as dizzy and disgusted, more suitable for long
hours microscopic operation. Therefore, it finds its extensive applications in the
microelectronics, the production, education and research and development in
instruments/meters, jewelry/ornaments, living creature, agriculture and forestry,
material, public security criminal department and medical treatment, etc.
1.3 Mainframe technical parameters:
Continual zooming ratio 1:6.5(0.7X-4.5X)
Total magnification 18.7X-120X(4.7X-240X can be obtained with
varied accessories)
Digital amplification 8.4 inch TFT LCD (display screen resolution
800X600 pixels)
Display screen 5.0 MEGA pixels
CMOS sensor 92mm(46mm-243mm can be obtained with varied
accessories)
Working distance Φ8.9mm-Φ1.3mm(10mm-30mm can be obtained
with varied accessories)
Size of field visual Transverse axis continual magnification change
Zooming mode 100-240V/50-60Hz the working
powerofthemainframe:12VDC3A
AC adapter 100240V/5060Hztheworkingpowerofthemainframe
:12VDC3A
Auxiliary objective lens Standardconfigurationforauxiliaryobjectivelensis1.
0auxiliaryobjectivelens.Optionalauxiliaryobjectivel
ensesareavailablewith0.5,2.0
Illumination LED ring light.

. The installation of digital LCD microscopeⅡ
2.1 Installation
The ISM-DLC120 host and its support are disassembled for packaging.
Please open carefully the packing box and take out the instrument and
accessories(for detail, refer to the packing list). Then, connect the dove-tail groove at
the rear base of the machine with that at the upright column prior to the next step
operation.
The dove-tail groove on trestle table The dove-tail groove on mainframe Connect the dove-tail groove together
2.2 Attention
During installation, it is not allowed to touch the surface of the optical parts
and the surface of LCD screen directly with hand. The image quality may be
affected if the optical kits are stained with figure print or greasy stain. As to the
dirt on the surface of optical kits and LCD screen, please carry out treatment
according to maintenance of instrument introduced.
2.3 Preset adjustment
Select the operation distance of the machine by
rotating the focusing hand wheels. The tightness of
focusing hand wheels may be adjusted through
left/right focusing hand wheels by hands in inverse
direction. The focusing resistance is rather strong if
it is too tight while the machine may easily drop if
it is too loose. The users may adjust by themselves
according to the practical requirements.

. TheⅢApplication of digital LCD microscope
3.1 Turning on
After installation, connect the DC output to the PWR in port of the main system,
and then connect the AC power adapter in accordance with the requirements.
Turn on the master power switch. LED ring lamp will light, mainframe enter the
system, the screen show “WELCOME” .
The power of the adaptor:
AC100-240V 50 Hz /60Hz
The mainframe working power:
DC12V 3A
The light source adopts LED ring lamp, divided
into the LED circular indicator with adjustable
brightness and the multiple function LED circular
indicator controllable at four zones. The lower
light source is optional on requirements to facilitate
observation of different objects. The lower light
source is supplied by the PWR out at the rear of
the machine by connecting the PWR out of the
machine and the input port at the upright column
with a connection line.
Rotate the knob for continuous variable power
to adjust the optical variable magnification for the
microscopic image on the screen. (18.7X- 120 X)

3.2 Operation buttons and function
1 2 3 4 5 6 7 8 9
1. Power on/off 2. Increases or decrease the brightness of lamp 3. Light switch
respectively to control the four-region on or off 4. Self-definition linear converting
5. Linear color converting 6. Menu / confirm 7. Real time view / playback
8. Screen data display 9. Take pictures or take video
3.3 Data show on the LCD screen
Shown on the upper left corner is the quantity of photos to be taken available at
present or the video recording time (with 143 indicating 143 photos available to be
taken at the present setup mode; 50:24 indicating the time for video recording at
the present setup mode as 50min 24sec).
Shown on the upper right corner is the mode of photo taken or the
mode of video recording.
Shown on the lower left corner is the pixels of photos taken ( 2048×1536
indicating the pixels for photo taken at the present setup mode as 2048×1536;
320×240 indicating the pixels for video recording at the present setup mode as
320×240).
“C” shown on the lower right corner means that SD card is inserted in the machine.

3.4 The illumination control of the mainframe
The brightness of LED lamp may be increased or decreased with the help
of and . is respectively used to turn on/off for the corresponding
four corners of LED indicator.
If the light throw back from the object is too sharp, user can install a ground
glass on the LED ring lamp. It can improve the image quality. ( This ground glass
need to order )
3.5 Self-definition graphics
may be used to select self-definition graphics, including the cross line,
coordinates, lattice, carrying out simple locating and measurement. may be used
to select among colors of the self definition graphics, facilitating the clear indication
under different color materials.
3.6 How to measure
On the micro-ruler is calibrated with precise graduations of three kinds, i.e. 0.1mm,
0.01mm and 0.05mm respectively. Prior to the measurement of the object, select
firstly the coordinate or lattice for the self-definition graph. Then, select a certain
graduation of micro-ruler under the digital LCD microscope. After having clear

focusing, estimate the separation of the coordinate or lattices by comparing the
separation of coordinate or lattice with the distance of the standard graduation.
Under the condition not to change the power, observe the object inspected. After
having clear focusing, user can estimate the length or size of area for the object
observed with the separation of the coordinate or lattice. (This micro-ruler need to
order)
Example:
Select the standard graduation of 0.05mm under
a given power and move the micro-ruler after
having clear focusing so that the coordinate
corresponds with the micro-ruler. The standard
ruler of every 12 graduations correspond to 19
graduations of the coordinate ruler, then, each
graduation of the coordinate ruler is about 0.03mm
(12 0.05/19 ). In this case, user can carry out the
measurement for the object observed under
microscope according the distance of coordinate
ruler (requiring re-calibration of the separation of
coordinate ruler each time for a changed power).
3.7 Selection of function menu
With the help of the function menu, it is available to carry out the setting
for the whole system. It is available to select the following functions through
right/left key:
Use up/down key to choice each item, press
at last.
A. Photo taken mode
B. Image Setting
C. Image Size
D. Date and time
E. TV Out
F. Frequency
G. Choice menu language.

A. Photo taken mode
It is available to select single photo or video shooting.
Select single photo at the photo taken mode menu and
press the photo taking button, the microscope will take
a photo. At the photo taking mode menu and select the
video 320×240, press the photo taking button to start
AVI video recording. Press the photo taking button
once more to stop the AVI video recording.
B. Image Setting
Choice auto or exposure time item, exposure time
can be set up between-1.5s ~ +1.5s.
C. Image Size
Selection of different pixel may set up the photo
size at single photo shooting mode.
D. Date and time
It is available to set up the day, month, year, hour,
minute and second. The up/down, right/left and center
button may be used to set up the current date and
time.Exit from the setting after confirming the date and
the time. The time record on/off: after selecting “Time
record On” and confirm, the present date and time will
be indicated on the lower right corner of the photo.
Select “Time record OFF” to turn off the time recording
on the photo taken.