
3
2
Structure:
Introduction
WF 10X
reflected LED light
focus adjustment
working stage
diameter: 100mm
objective magnification
objective
transmitted LED light
reflected LED light adjustment
eyepiece
adjustment
adjustment
ISM-ZS50/50T series are binocular stereo microscope, can magnify
a ting object to an erecting stereo image. They have the character of
comparatively long working distance, wide field, high image quality
an d a s tep les s z o om ra n gi n g. Es p eci all y s u ita ble f o r u sin g in
teaching, observing study and scientific research etc. It can be used
fo r o bse r vin g stud y, b i olo g ica l a nat o my in m edi c al an d hyg i eni c
work, cul t ural education and scientific resear c h, agricultural a n d
forestry, geology, pearls and jewels, public security act units. Also, it
can be used for testing, installing and repairing tiny precise spare
parts in electronics industry, instrument and meter trade etc.
1Installation:
Operation Instructions
2Connect the power:
Plug the power cable into the back of microscope and connect the
power.
Illumination selection:
3
Take the accessories from the package objective part
to the stand and tighten the screw. Remove the eyepiece
covers and insert the eyepieces into the tube.
, put the
Select reflected LED light or transmitted LED light according to
observe requirement. The brightness can be adjusted by the
rotary knob. You can also adjust the angle of reflected LED light
in order to get sufficient illumination for the sample.
4Pupil adjustment:
Move the two eyepiece tubes and make the two images coincide.
5Focusing:
Select the suitable magnification, then rotate the focus
handwheel and make the image clear.
You can also rotate the eyepiece for diopter adjustment, it will
help you to get more clear image.