insize ISM-ZS30 User manual

MN ISM- -ZS30-E
ZOOM STEREO MICROSCOPE
www.insize.com
ISM-ZS30
OPERATION MANUAL
V0

1
Attention
Place the microscope in a cool, dry place where is free from dust,
Do not disassemble lens by userself as they all have been preadjusted
and tested. Should filth is found on the lens, it would be cleaned gently
with absorbent cotton with xylene. If alcohol is used, be careful not
Do switch off power after using of instrument, pull out the plug when
the instrument is not in use for a long time.
Handle the instrument carefully and gently during transport. It is
strictly forbidden to put upside down.
acid, alkali, steam etc.
to let it soak into lens, or lens will come unglued. Dust on the lens
can be blowed with a blower or cleaned gently with a clean writing
brush, lens-cleaning paper etc. Be more careful not to touch optical
elements when clean the mechanical part and smear corrosiveness
lubrication/lubricant oil. You should touch it, clean it at once to avoid
mould.
12
Structure:
Introduction
ISM-ZS30 is binocular stereo microscope, can magnify a ting object
to an er e ct i ng st e re o im a ge . They h a ve the ch ara cte r o f
comparatively long working distance, wide field, high image quality
an d a st e pl e ss z o om ra ngi ng. E s pe c ia l ly s u it a bl e fo r us i ng i n
teaching, observing study and scientific research etc. It can be used
fo r o bse rvi n g stu dy, bio l ogi c al a n ato m y in m e dic al an d hygi e nic
work, cul t u ral education and scientific researc h , agricultural and
forestry, geology, pearls and jewels, public security act units. Also, it
can be used for testing, installing and repairing tiny precise spare
parts in electronics industry, instrument and meter trade etc.
reflected LED light
WF 10X
eyepiece
focus adjustment
working stage
diameter: 95mm
objective magnification
adjustment
objective
transmitted LED light
adjustment
reflected LED light adjustment

4
Technical Parameters
Objective
Pupil distance
Diopter adjustment
Working distance of objective
Max. workpiece height
Illumination
Code ISM-ZS30
Optical tube binocular
Eyepiece (wide field)
Dimension(LxWxH)
Weight
10X (view field: )
1X-4.5X (zoom)
55-75mm (adjustable)
±5 diopter (two eyepieces)
97mm
147mm
adjustable reflected and transmitted LED light
260×190×400mm
4.3kg
Ø22mm
Standard Delivery
Main unit
WF 10X eyepiece
Ø95mm glass plate
Ø95mm white/black plate
Anti-dust cover
1pc
2pcs
1pc
1pc
1pc
Optional Accessory
ISM-ZS30-OB05X
ISM-ZS30-OB06X
ISM-ZS30-OB07X
ISM-ZS30-OB2X
ISM-ZS30-EPD10X
ISM-ZS50-EP15X
ISM-ZS50-EP20X
ISM-D500
0.5X
0.63X
0.75X
2X
10X dividing eyepiece (0.1mm/div.)
WF15X (view field: Ø16mm)
WF20X (view field: Ø12mm)
Auxiliary
objective
Eyepiece
Digital camera
3
1Installation:
Operation Instructions
2Connect the power:
Plug the power cable into the back of microscope and connect the
power.
Illumination selection:
3
Take the accessories from the package objective part
to the stand and tighten the screw. Remove the eyepiece
covers and insert the eyepieces into the tube.
, put the
Select reflected LED light or transmitted LED light according to
observe requirement. The brightness can be adjusted by the
rotary knob. You can also adjust the angle of reflected LED light
in order to get sufficient illumination for the sample.
4Pupil adjustment:
Move the two eyepiece tubes and make the two images coincide.
5Focusing:
Select the suitable magnification, then rotate the focus
handwheel and make the image clear.
You can also rotate the eyepiece for diopter adjustment, it will
help you to get more clear image.