INSTEON Hub User manual

INSTEON Hub
Quick Start Guide
2242-222 (US), 2242-422 (EU),
2242-442 (UK), 2242-522 (AUS/NZ)

The INSTEON Hub lets you setup, control and
manage your INSTEON devices from your
smartphone or tablet.
Use the INSTEON for Hub App to set timers
and schedules, program devices and receive
alerts.
Get Started
1

X
1Connect the INSTEON Hub directly to a
wall outlet and your internet router using
only the cables provided
Setup the INSTEON Hub
2
Avoid power strips and switched outlets

insteon for hub
INSTEON for Hub
X
INSTALL
2From your mobile device, download and
install INSTEON for Hub from the Apple
App Store or Google Play
3

3Launch the App and follow the
on-screen instructions to create an
account and setup the INSTEON Hub
INSTEON Login
New Account
Existing Account
4
Setup Complete

www.insteon.com/pc
INSTEON
for Windows
www
DOWNLOAD
On your PC, download HouseLinc from
insteon.com/pc and follow the on-screen
instructions
Use the INSTEON Hub with any
control software that supports using
the Hub as an INSTEON modem
5
Use the Hub as an INSTEON Modem
www
X

MANUAL
INSTEON Hub.pdf
TECH SUPPORT
www.insteon.com/support
INSTEON Phone Support
5AM - 7PM Monday - Friday
6AM - 3PM Saturday Pacic Time
866-243-8022
6
For More Info

This product has been thoroughly tested by Intertek ETL, a nationally
recognized independent third-party testing laboratory. The North American
ETL Listed mark signies that the device has been tested to and has met
the requirements of a widely recognized consensus of U.S. and Canadian
device safety standards, that the manufacturing site has been audited, and
that the manufacturer has agreed to a program of quarterly factory follow-up
inspections to verify continued conformance.
FCC and Industry Canada Compliance Statement
This device complies with FCC Rules Part 15 and Industry Canada RSS-210
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
Le present appareil est conforme aux CNR d’Industrie Canada applicables
aux appareils radio exempts de licence. L’exploitation est autorise aux deux
conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radiolectrique subi,
mme si le brouillage est susceptible d’en compromettre le fonctionnement.
The digital circuitry of this device has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against
harmful interference in residential installations. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio
and television reception. However, there is no guarantee that interference
will not occur in a particular installation. If this device does cause such
interference, which can be veried by turning the device off and on, the user
is encouraged to eliminate the interference by one or more of the following
measures:
- Re-orient or relocate the receiving antenna of the device experiencing the
interference
- Increase the distance between this device and the receiver
- Connect the device to an AC outlet on a circuit different from the one that
supplies power to the receiver
- Consult the dealer or an experienced radio/TV technician
WARNING: Changes or modications to this device not expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment.
Protected under U.S. and foreign patents (see www.insteon.com/patents)
Rev 04.10.13