INSTEON Assurance Kit User manual

Assurance Kit
Quick Start Guide
Favorites
74º
2:10 PM
Add
All Devices BedroomBathroom
Check-In GarageFavorites
Kitchen
Favorites Rooms Scenes Check-In Settings
OutsideLiving Room

INSTEON Starter Kit
Factory Reset
Ethernet Port
Power
Status LED Idle / Linking
Unlinking
Ethernet
Cable
Power
Cable

Setup Your Kit
1Connect the Hub to power and your
internet router using only the cables
provided.
Avoid power strips and switched outlets
X

Scan the QR Code and
tap your store.
2Download and install the latest
INSTEON for Hub App from your
device’s app store.
insteon for hub
INSTEON for Hub

3Connect to the same network as the
INSTEON Hub and launch the App.
Create a new account.
INSTEON
Create an Account
Sign In

4
Add Devices
Follow the on-screen instructions to
add your devices.
+
For additional documentation, visit:
insteon.com/support

On/O Module
Learn more about On/O Module
insteon.com/onomodule-qsg
Up to 1,800W/15A maximum load
Set Button
O
On
Status LEDOn
O

Open/Close Sensor
Magnet
(Cover Removed)
Status LED
AA Battery
(Included)
Set Button
Learn more about Open/Close Sensor
insteon.com/openclosesensor-qsg

Motion Sensor
®
Set Button
(Cover Removed)
Status LED
9V Battery
(Included)
Settings
Jumpers
Wall Mount
Retention Slot
Learn more about Motion Sensor
insteon.com/motionsensor-qsg

Leak Sensor
(Cover Removed)
AA Battery
(Included)
Water Contacts
(Metal)
Set Button Status LED
Learn more about Leak Sensor
insteon.com/leaksensor-qsg

Remote Access
You can monitor and control your devices
when away if you setup Remote Access.
We’re here to help. Contact INSTEON
Support at 866.243.8022.
!

Rev 08.12.14
Protected under U.S. and foreign patents (see www.insteon.com/patents)
©2014 INSTEON
Create a Schedule
Schedules can be set for individual
devices or entire scenes. Go to Settings
and tap Schedules.