INSTEON Connected Kit User manual

Connected Kit
Quick Start Guide
Favorites
74º
2:10 PM
Add
All Devices BedroomBathroom
Check-In GarageFavorites
Kitchen
Favorites Rooms Scenes Check-In Settings
OutsideLiving Room

INSTEON Hub
Factory Reset
Ethernet Port
Power
Status LED Idle / Linking
Unlinking
Ethernet
Cable
Power
Cable

Setup Your Kit
1Connect the Hub to power and your
internet router using only the cables
provided.
Avoid power strips and switched outlets
X

Scan the QR Code and
tap your store.
2Download and install the latest
INSTEON for Hub App from your
device’s app store.
insteon for hub
INSTEON for Hub

3Connect to the same network as the
INSTEON Hub and launch the App.
Create a new account.
INSTEON
Create an Account
Sign In
For additional documentation, visit:
insteon.com/support

4
Add Devices
Follow the on-screen instructions to
add your devices.
+
Rev 08.05.14
Protected under U.S. and foreign patents (see www.insteon.com/patents)
©2014 INSTEON

Dimmer Module
Up to 300W maximum load
Set Button
O
Dim
On
Brighten
Status LEDOn
O
®
Learn more about Dimmer Module
insteon.com/dimmermodule-qsg

Open/Close Sensor
Magnet
(Cover Removed)
Status LED
AA Battery
(Included)
Set Button
Learn more about Open/Close Sensor
insteon.com/openclosesensor-qsg

Motion Sensor
®
Set Button
(Cover Removed)
Status LED
9V Battery
(Included)
Settings
Jumpers
Wall Mount
Retention Slot
Learn more about Motion Sensor
insteon.com/motionsensor-qsg

Leak Sensor
(Cover Removed)
AA Battery
(Included)
Water Contacts
(Metal)
Set Button Status LED
Learn more about Leak Sensor
insteon.com/leaksensor-qsg

Learn more about Thermostat
insteon.com/thermostat-qsg
Thermostat
SET
72
SET
Mode
Set Button
Temperature Adjust
Status LED

Learn more about WiFi Camera
insteon.com/wicamera-qsg
WiFi Camera
Microphone
Speaker
Night Vision
LEDs
Day/Night
Sensor
OUT
AUDIO
IN
ANT
DC5V2A
AntennaAudio
Power
Ethernet