Intellisystem ThermalTronix TT-607FG-HTI User manual

INFRARED GAS DETECTION
THERMAL IMAGING CAMERA
ThermalTronix
TT-607FG-HTI
User Manual

1
1
Warnings and Precautions
· Infrared gas leak temperature imager uses a very sensitive thermal sensor, so in
any case (power on or off) shall not be directed at the device lens strong radiation
sources (such as the sun, direct laser beam or reflection, etc.) , Otherwise it will
cause permanent damage to the Infrared Gas Leak Detector Imager.
· Do not strongly shake or hit the equipment during transportation and use.
· It is recommended to use the original packing box when storing the equipment,
and place it in a cool, dry, ventilated environment without strong electromagnetic
field.
·Avoid oil stains and all kinds of chemical contamination of the lens surface and
damage the surface. When finished, close the lens cap.
· It is recommended to backup. In order to prevent the potential danger of data loss,
please copy (backup) the data to the computer frequently.
· An infrared gas leak detector may require 8-10 minutes of warm-up before the
data can be read accurately.
· Each Infrared Gas Leak Detector has been calibrated at the factory. Temperature
correction is recommended every year.
· Do not open the cabinet or modify it. The maintenance can only be carried out by
our authorized personnel.

2
2
Contents
1INTRODUCTION............................................................................................................3
1.1 STANDARD ACCESSORIES............................................................................................3
2FUNCTION KEYS AND INTERFACE...........................................................................4
2.1 FUNCTION KEYS...............................................................................................................4
2.2 INTERFACE ......................................................................................................................7
3BASIC OPERATION......................................................................................................8
1.3 MOUNTING ACCESSORIES. ..........................................................................................8
3.1.1 Battery..............................................................................................................8
3.1.1.1 Install /Uninstall.................................................................................................8
3.1.1.2 Battery safety use common sense ........................................................................9
3.1.2 SD Card...........................................................................................................9
2.3 QUICK GUIDE...........................................................................................................10
3.2.1 Get infrared imaging......................................................................................10
3.2.2 Measure temperature....................................................................................10
3.2.3 Save photo/Voice note..................................................................................11
3.2.4 Imaging and voice playback..........................................................................11
3.2.5 Output the saved file......................................................................................11
4OPERATION GUIDE....................................................................................................12
1.4 INTERFACE DESCRIPTION ..........................................................................................12
2.4 MENU FUNCTIONS....................................................................................................13
4.2.1 Settings..........................................................................................................13
4.2.1.1 Measurement settings ....................................................................................14
4.2.1.2 Temperature correction ..................................................................................14
4.2.1.3 Analysis settings............................................................................................15
4.2.1.4 Time settings.................................................................................................15
4.2.1.5 System settings..............................................................................................16
4.2.1.6 Color palettes setting .....................................................................................16
4.2.1.7 System information........................................................................................16
4.2.1.8 Factory settings .............................................................................................17
4.2.2 Document menu ............................................................................................17
4.2.2.1 Open.............................................................................................................17
4.2.2.2 Save..............................................................................................................18
4.2.2.3 Record..........................................................................................................18
4.2.2.4 SD Choice. Choose from SD1 and SD2. .........................................................18
4.2.2.5 SD unload.....................................................................................................18
4.2.2.6 Delete file. ....................................................................................................19
4.2.2.7 SD format.....................................................................................................19
4.2.3 Measurement mode.......................................................................................19

3
3
5FACTORY SETTING PARAMETER TABLE...............................................................20
1 Introduction
Thank you for choosing TT-607FG-HTI infrared gas leak detection temperature imager.
TT-607FG-HTI infrared gas leak detection temperature imager is infrared system,
long-wave infrared quantum well focal plane array detector, electronic processing
systems and image processing software, the infrared radiation measurement object is
converted to visual thermal images, to long-range Detection of sulfur hexafluoride gas
and other trace leakage point, and quantitatively shows the target surface temperature,
is a fast, accurate, non-contact detection of live equipment and other micro-leakage and
thermal fault of advanced measuring instruments.
1.1 Standard Accessories.
TT-607FG-HTI infrared gas leakage imager
Safety box
Lens cap
Li-on Battery (2pcs)
Charger
HDMI Video cable
USB cable
SD Card
SD Card reader
User manual

4
4
2 Function keys and interface
2.1 Function keys
Pic 2-1-1 TT-607FG-HTITop View
2
3
4
5
1
6

5
5
Pic 2-1-2 TT-607FG-HTI Back view
Pic 2-1-3 TT-607FG-HTI Bottom view
12
10
7
9
11
8
14
13

6
6
Pic 2-1-4 TT-607FG-HTI Side view
No
.
Name
Function
1
Freeze/Save
(Mark S)
To freeze or activate the thermal image. Twice press to save photo
in imaging. There will be a “*” mark besides the Intellisystem
Logo when the imaging is feezed.
2
Calibration (Mark
A)
Long press to make calibration. One press to choose Color,
contrast, temperature measurement mode
3
Leaser Pointer
Leaser Pointer.
4
CCD camera
Daylight camera, manual focus.
5
View Finder
To see imaging.
6
Adjustment Knob
of view finder
Adjust the sharpness in view finder.
7
Power On/Off
Long press to turn on/off the imager.
8
OK
Enter/Select settings in menu.
9
Up
Hot Key or Menu Selection.
10
Right
Enter/Select in second level menu. Manual focus when infrared
imaging mode (long/short press).
11
Left
Quit second level menu. Manual focus when infrared imaging
mode (long/short press).
12
Down
Hot Key or Menu Selection.
13
Cancel/ Mode
switch/ Auto
Cancel or Quit the setting menu；switch between CCD camera and
Infrared camera；Long press to makeAuto focus.
16
15

7
7
focus (Mark C)
14
SD Card
For SD card to save file.
15
Microphone
For voice recording
16
LCD Screen
To see imaging
2.2 Interface
Pic 2-2-1 TT-607FG-HTI Interface at back side.
17
Mini USB
Data transfer.
18
Power supply
DC10~15V
19
Audio output
20
HDMI
Video output
17
18
19
20

8
8
3 Basic Operation.
1.3 Mounting Accessories.
3.1.1Battery
3.1.1.1 Install /Uninstall
Install：push the battery into the camera as this photo.
Uninstall：Press the battery latch to the right, then pull out the battery.
Note: The device can only use the standard battery, or the battery may be stuck, the
voltage does not damage the device and so on. If the battery pops up may be away from
the equipment, please pay attention to protection.

9
9
3.1.1.2 Battery safety use common sense
1、The battery should be kept as far as possible -20 ℃∽20 ℃ambient temperature,
the battery during storage due to the existence of a small amount of self-discharge
phenomenon, in order to avoid the battery during storage may have the impact of
over-discharge battery capacity, the battery should be fully charged Save, and at
regular intervals for a charge. The time interval is as follows:
Ambient temperature is -20°C ∽20°C, once every 6 months
Ambient temperature is 20°C ∽45°C, once every 3 months
Ambient temperature is, 45°C ∽60°C, once every month
Each charge must be greater than 50% of battery capacity.
2、Charging the battery at ambient temperature of 0 ℃∽40 ℃, 0 ℃ambient
temperature will cause the battery charge loss, 40 ℃ambient temperature when
charging the battery temperature may be too high.
3、Notes:
Do not disassemble, squeeze, jab the battery;
Do not short-circuit the battery external contacts;
Do not place the battery in fire or in water;
Do not place the child in touch.
3.1.2 SD Card
Memory card installation: Open the SD card door, insert the SD card, and then cover the
SD card door cover.
Memory card unloading: Open the SD card door, press the SD card down, will
automatically eject, and remove the SD card.
Note: Do not hot swap the SD card, otherwise it may cause an exception, you need to
restart after shutdown.