International Light Technologies CureRight ILT800 User manual

The opening screen appears as follows:
(note you can perform these steps in any order, If you iniate soware first, when see a no devices
connected error message, simply plug in the meter, turn it on, place in Data Ready ode and then
“Re-Scan for eter” in the soware.)

 Results are read from the meter and display the previously programmed Device
ID’s. →
 ! will load the list that was previously saved with the " ! opon noted below.
" !tores the current values shown in the box
Note: Save/Load to file facilitates the programming of mulple ILT800 units, 1 at a me.
Create ID: Type each ID name in the square white box and hit return to enter a new line unl all ID’s
are entered. Once complete hit configure device.

#
•!$"%"Enter Value in scienfic notaon.
•&!# me: Enter allowable me in seconds.
•"'( Enter me in minute, 0 (never) or between
•"
◦Use the same me as the computer running the CureRight soware.
◦The me can be set as either Local me or UTC/G T
•"&
: loads the ILT800/ILT850 meter with the parameters entered.
)*"+Used if there are communicaon issues or to recognize the next meter for
programming mulple systems. ,!-!
./
0!
The Baselines tab will download all the baselines (saved readings) for the selected Device ID. Use the
drop down box next to Device ID to make your selecon.
Click on Download Baselines to iniate downloading of all readings saved under the selected device
ID.
Right-clicking any graph gives the opon of copying the graph to the clipboard, saving the graph data
to a CSV file, or saving all the data from the current download to a CSV file.

$.!"12../
Note: The eter App. In ILT’s DataLight III soware package can also be used to capture data live to
your PC like our ILT2400 handheld ILT5000 Research and ILT1000 datalogging radiometers.
Datalight III can be downloaded from the ILT website in the 2!tab on the
ILT2400 Radiometers Pages (as well as the ILT5000 and ILT1000 pages)
h?ps://www.intl-ligh?ech.com/products/ilt2400-hand-held-light-meter