INVENTOR MGHP-12 User manual

Model: MGHP-12
MGHP-12BS
Σ
Υ
Σ
Τ
Η
Μ
Α
Τ
Α
Κ
Λ
Ι
Μ
Α
Τ
Ι
Σ
Μ
Ο
Υ
A
I
R
C
O
N
D
I
T
I
O
N
I
N
G
S
Y
S
T
E
M
S
Thank you for choosing INVENTOR®
air conditioning system. For the
correct use of this unit, please read
this manual carefully and keep it for
future reference.
Σας ευχαριστούµε για την επιλογή
συστήµατος κλιµατισµού INVENTOR®.
Για την σωστή χρήση της µονάδας
παρακαλείσθε, διαβάστε το εγχειρίδιο
και κρατήστε το για µελλοντική
αναφορά.
English/Ελληνικά/Română/Deutsch
Owner’s Manual
Remote Controller of portable AC Unit
Εγχειρίδιο Χρήσης
Τηλεχειριστήριο φορητής μονάδας κλιματισμού
Manual de Utilizare
Telecomandă Pentru Aparatul deAer Condiționat de Tip Mobil
Benutzer's Betriebshandbuch
Fernbedienung der Beweglich Klimaanlage

1
2
3
4
6
7
7
7
8
8
9
12
Handling the remote controller ......................................................
Remote controller Specifications...................................................
Function buttons .................. .........................................................
Indicators on LCD .........................................................................
How to use the buttons .................................................................
Auto operation........................................................
Cooling/Heating/Fan operation.................................................
Dehumidifying operation ...............................................................
.
.........................
.....
Swing operation..............................................................................
Timer operation...............................................................................
ECONOMY operation ....................................................................
CONTENTS

2
Use the remote controller within a distance of 8
meters from the appliance, pointing it towards the
receiver. Reception is confirmed by a beep.
L o c a t i o n o f t h e r e mo t e co n t r ol l e r.
C A UTIONS
The air conditioner will not operate if curtains, doors or other materials
block the signals from the remote controller to the indoor unit.
Prevent any liquid from falling into the remote controller. Do not expose
the remote controller to direct sunlight or heat.
If the infrared signal receiver on the indoor unit is exposed to direct
sunlight, the air conditioner may not function properly. Use curtains to
prevent the sunlight from falling on the receiver.
If other electrical appliances react to the remote controller. either move
these appliances or consult your local dealer.
The remote controller is powed by two dry
batteries(R03/LR03X2) housed in the rear
part and protected by a cover.
(1) Remove the cover by pressing and sliding off.
(2) Remove the old batteries and insert the new
batteries,placing the(+) and (-) ends correctly.
(3) Reattach the cover by sliding it back into
position.
When the batteries are removed, the
remote controller erases all programming.
After inserting new batteries, the remote
controller must be reprogrammed.
NOTE:
R ep lacing ba t t eries
H a n d li n g t h e r e m o t e c ont roller

3
Model
Lowest Voltage of
CPU Emitting Signal
Rated Voltage
RG51B/(C)EU, RG51B16/(C)E,RG51B31/(C)EU
-5 ºC 60ºC ( )
8m
3.0V(Dry batteries R03/LR03 2)
2.0V
,
Remote Controller Specifications
1. Operating Mode: AUTO, COOL, DRY, HEAT(Cooling only
model without), and FAN.
2. Timer Setting Function in 24 hours.
3. Indoor Setting Temperature Range : 17ºC ~30 ºC(62 F~88 F).
4. Full function of LCD (Liquid Crystal Display)
O O
Environment
Signal Receiving
Range
Performance Feature
CAUTIONS
Do not mix old and new batteries or batteries of a different type.
Do not leave the batteries in the remote controller if it is not going
to be used for 2 or 3 months.
Dispose of the old batteries in the special containers to be found
in the sales outlets.
-41 F~140 F
O O
NOTE:
Temperature setting display:
Celsius scale( C):
Fahrenheit scale( F):
RG51B14/(C)E, RG51B16/(C)E,RG51B18/(C)E,RG51B31/(C)E,RG51B19/(C)E-M,
RG51B20/(C)E,RG51B25/(C)E,RG51B27/(C)E,RG51B30/(C)E,RG51B32/(C)E,
RG51B30/(C)EF.
RG51B/(C)EU, RG51B1/(C)EU, RG51B17/(C)EU,RG51B26/(C)EU,
RG51B30/(C)EU,RG51B31/(C)EU.
RG51B1/(C)EU, RG51B14/(C)E,RG51B31/(C)E
RG51B19/(C)E-M, RG51B20/(C)E,RG51B30/(C)EU
RG51B25/(C)E, RG51B26/(C)EU;RG51B27/(C)E,
RG51B30/(C)E,RG51B30/(C)EF
RG51B17/(C)EU, RG51B18/(C)E,RG51B32/(C)E
All the illustrations in this manual are for explanation purpose only.
Your air conditioner may be slightly different.The actual shape shall
prevail.
NOTE:

4
Function buttons
1
TEMP DOWN Button
Push this button to decrease the indoor temper-
ature setting in 1 C(2 F) increments to 30 C(88 F).
oo
2
TEMP UP Button
Push this button to increase the indoor temper-
ature setting in 1 C(2 F) increments to 17 C(62 F).
oo
Model: RG51B14/(C)E,RG51B16/(C)E,
RG51B18/(C)E,RG51B19/(C)E-M,
RG51B20/(C)E,RG51B31/(C)E
RG51B30/(C)E,RG51B32/(C)E
RG51B16/(C)E ,RG51B18/(C)E
models have no SWING feature;
RG51B18/(C)E ,RG51B19/(C)E-M,
RG51B20/(C)E models have no
LED DISPLAY feature.
RG51B19/(C)E-M model has no
MED FAN feature.
RG51B31/(C)E model ECONOMY button
is instead of SLEEP button.
RG51B30/(C)E model has no
MED FAN and SWING features.
RG51B32/(C)E model has no MED FAN,
SWING and ECONOMY features.
NOTE:
Each time the button is pressed, the operation
mode is selected in the sequence of the following:
3
MODE Button
TEMP
AUTO
COOL
DRY
HEAT
FAN
HIGH
MED
LOW
MODE FAN SPEED
SWING TIMER ON
ECONOMY
ON/OFF
TIMER OFF
RESET LOCK
12
4
3
6
5
7
8
9
10
11
SET TEMPERATURE( C)
LED
DISPLAY
4
SWING Button(on some models)
Used to stop or start louver movement and
set the desired up/down airflow direction.
5
6
RESET Button
Once the recessed RESET button is pressed,
all of the current settings will be cancelled
and the controller will return to the initial settings.
7
ON/OFF Button
Operation starts when this button is pressed
and stops when the button is pressed again.
AUTO COOL DRY HEAT FAN
Used to select the fan speed in four steps:
Auto Low Med High
FAN SPEED Button
12
TIMER ON Button
8
Press this button to activate the Auto-on time
setting. Each press will increase the time setting
in 30 minutes increments, up to 10 hours, then at
1 hour increments up to 24 hours. To cancel the
Auto-on time setting, just press the button until
the time setting is 0.0.
9
ECONOMY(SLEEP) Button
Select this function during the sleeping time. It
can maintain the most comfortable temperature
and save energy. This function is available on
COOL, HEAT or AUTO mode only .
Some models have no MED FAN feature.
TE MP
AUTO
COOL
DRY
HEAT
FAN
HIGH
MED
LOW
MODE FAN SPEED
TIMER ON
ECONOMY
ON/OFF
TIMER OFF
RESET LOCK
12
3
6
5
7
8
9
10
11
SET TEMPERATURE( C)
LED
DISP LAY
12
ION
14
Model: RG51B 25/(C)E;RG51B27 /(C)E
RG51B30/(C)EF
SWING
NOTE:
RG51B25/(C)E model has no SWING
and FOLLOW ME features.
RG51B27/(C)E model has no FOLLOW ME
feature.
RG51B30/(C)EF model has no SWING and
ION features,ECONOMY button is instead
of SLEEP button
4
NOTE: Do not select HEAT mode if the machine you
purchased is cooling only type. Heat mode is not
supported by the cooling only appliance.
F OL LOW
ME
13

5
Function buttons (continued)
TIMER OFF Button
LOCK Button
Model: RG51B1/(C)EU,
RG51B/(C)EU,
RG51B26/(C)EU,
RG51B30/(C)EU,
RG51B31/(C)EU.
RG51B/(C)EU models
have no SWING and FOLLOW ME
buttons ;RG51B1/(C)EU models
have no FOLLOW ME button;
RG51B30/(C)EU models have no
SWING ,FOLLOW ME buttons and
MED FAN feature,and SLEEP button
instead of ECONOMY button;
RG51B31/(C)EU models have on
FOLLOW ME button.
NOTE:
TEMP
AUTO
COOL
DRY
HEAT
FAN
HIGH
MED
LOW
MODE FAN SPEED
SWING TIMER ON
ECONOMY
ON/OFF
TIMER OFF
RESET LOCK
SET TEMPERATURE( F)
LED
DISPLAY
NOTE: While the unit is running under SLEEP mode,
it would be cancelled if ON/OFF, FAN SPEED, SLEEP
or MODE button is pressed.
10
Press this button to activate the Auto-off time
setting. Each press will increase the time setting
in 30 minutes increments, up to 10 hours, then at
1 hour increments up to 24 hours. To cancel the
Auto-off time setting, just press the button until
the time setting is 0.0.
11
Press this recessed button to lock all current
settings, and the remote controller will not accept
any operation except that of the LOCK. Use the
LOCK mode when you want to prevent settings
from being changed accidentally. Press the LOCK
button again to cancel the LOCK function. A lock
symbol will appear on the remote controller display
when the lock function is activated.
Press this button to clear the display on the
indoor unit, press it again to light the display .
LED Display Button
12
TEMP
AUTO
COOL
DRY
HEAT
FAN
HIGH
MED
LOW
MODE FAN SPEED
SWING TIMER ON
SLEEP
ON/OFF
TIMER OFF
RESET LOCK
SET TEMPERATURE( F)
TEMP
SENSING LED
DISPLAY
ION
13
Press this button to initiate FOLLOW ME function.
When the Follow Me function is activated, the
remote display is actual temperature at its location.
The remote control will send this signal to the air
conditioner every 3 minutes interval until press
the Follow Me button again.
The Follow Me function is not available under
DRY and FAN mode.
Switch the operation mode or turn off the unit will
cancel the follow me function automatically.
FOLLOW ME/TEMP SENSING Button
Model: RG51B17/(C)EU
13
14
When push this button, the ion generator is
energized and will help to remove pollen and
impurities from the air.
14
ION Button
9
NOTE:
RG51B18/(C)E ,RG51B19/(C)E-M,
RG51B20/(C)E models have no this feature.
FOLLOW
ME

6
TIMER ON OFF
SET TEMPERATURE
T r a n s m is s ion Ind ic a tor
T e m p. /T im e r dis pl ay
FA N SPEED d is play
M O D E di s pl ay
O N /O F F dis pl ay
This transmission indicator will light when remote
controller transmits signals to the indoor unit.
Displays the current selected mode. Including AUTO,
COOL, DRY, HEAT (cooling & heating models only)
and FAN.
The temperature setting (from 17 C(62 F) to
30 C(88 F)) or timer setting (0~24h) will be displayed.
If FAN mode is selected, there will be no display.
O O
O O
This indicator will be displayed when
the unit is operating.
Displays the selected fan speed: AUTO, HIGH,
when the fan speed is
selected in AUTO speed. When AUTO or DRY Mode
is selected, there will be no signals displayed.
MED
and LOW. Nothing displays
This display area shows the settings of the TIMER.
That is, if only the Auto-on time function is set, it will
display TIMER ON. If only the Auto-off time function
is set, it will display TIMER OFF. If both functions are
set, it will display TIMER ON OFF which indicates you
have chosen both the Auto-on time and Auto-off time.
LOCK display is displayed when pushing the LOCK
button. Push the LOCK button to clear display.
M O D E di s play (FAN mode)
T I ME R dis play
L O C K I n d icator
I nd ic a t or s on L CD
NOTE: RG51B19/(C)E-M model has no MED
FAN speed feature.
F O L L O W M E d i s play
When pressing FOLLOW ME/TEMP SENSING button
in COOL or HEAT mode, the remote sensing function
is activated and this indicator displays.

7
C oo li n g /H e a t ing /F a n ope r a t i on
MODE
TEMP
FAN SPEED
ON/OFF
Ensure the unit is plugged in and power is
available.
1. Press the button to select COOL, HEAT,
(cooling & heating models only) or FAN mode.
2. Press the button to set the desired
temperature. The temperature can be set
within a range of
3. Press the button to select the
fan speed in four steps- Auto, Low, Med,or High.
4. Press the button to start the air
conditioner.
17 C(62 F)~ 30 C in 1 C(2 F)
increments.
In the FAN mode, the setting temperature is not
displayed in the remote controller and you are not
able to control the room temperature either. In this
case, only step 1, 3 and 4 may be performed.
NOTE
H ow to us e the bu tt ons
A uto ope r a t ion
MODE
TEMP
ON/OFF
Ensure the unit is plugged in and power is
available. The OPERATION indicator on the
display panel of the indoor unit illuminates.
1. Press the button to select Auto.
2. Press the button to set the desired
temperature. The temperature can be set
within a range of 17 C(62 F)~ 30 C in 1 C(2 F)
increments.
3. Press the button to start the air
conditioner.
3
1
2
1. In the Auto mode, the air conditioner can logically
choose the mode of Cooling, Fan, Heating and
Dehumidifying by sensing the difference between the
actual ambient room temperature and the set temper-
ature on the remote controller.
2. In the Auto mode, you can not switch the fan speed.
It has already been automatically controlled.
3. If the Auto mode is not comfortable for you , the
desired mode can be selected manually.
NOTE
TEMP
AUTO
COOL
DRY
HEAT
FAN
HIGH
MED
LOW
MODE FAN SPEED
SWING TIMER ON
ECONOMY
ON/OFF
TIMER OFF
RESET LOCK
SET TEMPERATURE( C)
LED
DISPLAY
3
1
2
TEMP
AUTO
COOL
DRY
HEAT
FAN
HIGH
MED
LOW
MODE FAN SPEED
SWING TIMER ON
ECONOMY
ON/OFF
TIMER OFF
RESET LOCK
SET TEMPERATURE( C)
LED
DISPLAY
4

8
Dehumidifying operation
MODE
TEMP
ON/OFF
Ensure the unit is plugged in and power is
available. The OPERATION indicator on the
display panel of the indoor unit illuminates.
1. Press the button to select DRY mode.
2. Press the button to set the desired
temperature. The temperature can be set
within a range of
increments.
3. Press the button to start the air
conditioner.
17 C(62 F)~ 30 C in 1 C(2 F)
In the Dehumidifying mode, you can not switch
the fan speed. It has already been automatically
controlled.
NOTE
3
1
2
TEMP
AUTO
COOL
DRY
HEAT
FAN
HIGH
MED
LOW
MODE FAN SPEED
SWING TIMER ON
ECONOMY
ON/OFF
TIMER OFF
RESET LOCK
SET TEMPERATURE( C)
LED
DISPLAY
Swing operation (on some models)
Use the SWING button to adjust the Up/Down
airflow direction .
1. When press the button once and quickly, the
air flow direction setting feature of the louver is
activated. The moving angle of the louver is
6 for each press. Keep pressing the button to
move the louver to the desired position.
:On some models press it to initiate the Auto
swing feature only.
2. If keep pressing the SWING button without
releasing for 2 more seconds, the auto swing
feature of the louver is activated. The horizontal
louver would swing up/down automatically.
Press it again to stop.
When the louver swing or move to a
position which would affect the cooling
and heating effect of the air conditioner,
it would automatically change the swing/
moving direction.
o
NOTE
NOTE:
1
TEMP
AUTO
COOL
DRY
HEAT
FAN
HIGH
MED
LOW
MODE FAN SPEED
SWING TIMER ON
ECONOMY
ON/OFF
TIMER OFF
RESET LOCK
SET TEMPERATURE( C)
LED
DISPLAY

9
T im e r op e ra tion
press the TIMER ON button can set the auto-on
time of the unit. And press the TIMER OFF button
can set the auto-off time of the unit.
1. Press the TIMER ON button. The remote
controller shows TIMER ON, the last Auto-on
setting time and the signal "h" will be shown on
the LCD display area. Now it is ready to reset the
Auto-on time to START the operation.
2. Push the TIMER ON button again to set desired
Auto-on time. Each time you press the button,
the time increases in 30 minutes increments, up
to 10 hours, then at 1 hour increments up to 24
hours.
3. After setting the TIMER ON ,there will be a one-
half second delay before the remote controller
transmits the signal to the air conditioner. Then,
after approximately another 2 seconds, the
signal "h" will disappear and the set temperature
will re-appear on the LCD display window.
To set the Auto-on time.
To set the Auto-off time.
1. Press the TIMER OFF button. The remote
controller shows TIMER OFF, the last Auto-off
setting time and the signal "h" will be shown on
the LCD display area. Now it is ready to
reset the Auto-off time to START the operation.
2. Push the TIMER OFF button again to set desired
Auto-off time. Each time you press the button,
the time increases in 30 minutes increments, up
to 10 hours, then at 1 hour increments up to 24
hours.
3. After setting the TIMER OFF ,there will be a one-
half second delay before the remote controller
transmits the signal to the air conditioner. Then,
after approximately another 2 seconds, the
signal "h" will disappear and the set temperature
will re-appear on the LCD display window.
1
2
TEMP
AUTO
COOL
DRY
HEAT
FAN
HIGH
MED
LOW
MODE FAN SPEED
SWING TIMER ON
ECONOMY
ON/OFF
TIMER OFF
RESET LOCK
SET TEMPERATURE( C)
LED
DISPLAY
TIMER ON

10
The effective operation time set by the remote controller for the timer
function is limited to the following settings: 0.5, 1.0, 1.5, 2.0, 2.5, 3.0,
3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10, 11, 12, 13,
14, 15,16,17, 18, 19, 20, 21, 22, 23 and 24.
IMPORTANT
E xa m ple o f T im e r s e tt ing
TIMER ON
Start
Off
6 hours later
(Auto-on Operation)
The TIMER ON feature is useful when you want
the unit to turn on automatically before say when
you return home. The air conditioner will automa-
tically start operating at the set time.
To start the air conditioner in 6 hours.
1. Press the TIMER ON button, the last setting of
starting operation time and the signal
2. Press the TIMER ON button to display "6:0h" on
the TIMER ON display of the remote controller.
3.
"h" will
show on the display area.
Wait for about 3 seconds and the digital display
area will show the temperature again. Now this
function is activated.
TIMER ON
Example:
h

11
TIMER OFF
Stop
On
Set 10 hours later
(Auto-off Operation)
The TIMER OFF feature is useful when you want
the unit to turn off automatically after you go to bed.
The air conditioner will stop automatically at the set
time.
To stop the air conditioner in 10 hours.
1. Press the TIMER OFF button, the last setting of
stopping operation time and the signal "h" will
show on the display area.
2. Press the TIMER OFF button to display "10h" on
the TIMER OFF display of the remote controller.
3. Wait for about 3 seconds and the digital display
area will show the temperature again. Now this
function is activated.
TIMER OFF
Example:
h
TIMER ON OFF
h
On
Stop
2 hours later
after setting
Set
To stop the air conditioner 2 hours after setting
and start it again 10 hours after setting.
1. Press the TIMER OFF button.
2. Press the TIMER OFF button again to
display 2.0h on the TIMER OFF display.
3.
4. Press the TIMER ON button again to
display 10h on the TIMER ON display .
5. Wait for the remote control to display
the setting temperature.
Press the TIMER ON button.
TIMER OFF TIMER ON
(On Stop Start operation)
This feature is useful when you want to stop the air
conditioner after you go to bed, and start it again in
the morning when you wake up or when you return
home.
-
- -
Example:
COMBINED TIMER
(S both ON and OFF )etting timers simultaneously
Start
10 hours later
after setting

12
Example:
TIMER ON TIMER OFF
(Off Start Stop operation)
This feature is useful when you want to start
the air conditioner before you wake up and
stop it after you leave the house.
-
- -
To start the air conditioner 2 hours after
setting, and stop it 5 hours after setting.
1. Press the TIMER ON button.
2. Press the TIMER ON button again to
display 2.0h on the TIMER ON display.
3. Press the TIMER OFF button.
4. Press the TIMER OFF button again to
display 5.0h on the TIMER OFF display .
5. Wait for the remote control to display
the setting temperature.
Off Stop
Start
TIMER ON OFF
h
2 hours later
after setting
5 hours later
after setting
Set
The timer setting(TIMER ON or TIMER OFF) that in
sequence occurs directly after the set time will be
activated first.
CAUTION
!
1
TEMP
AUTO
COOL
DRY
HEAT
FAN
HIGH
MED
LOW
MODE FAN SPEED
SWING TIMER ON
ECONOMY
ON/OFF
TIMER OFF
RESET LOCK
SET TEMPERATURE( C)
LED
DISPLAY
E CON O M Y (SLEEP ) o p e r a t ion
Active/Disable sleep function. It can maintain
the most comfortable temperature and save
energy. This function is available on COOL,
HEAT or AUTO mode only. For the detail, see
Sleep operation in USER S MANUAL.
,
,,
,,
,,
,,
NOTE: While the unit is running under SLEEP
mode, it would be cancelled if MODE, FAN
SPEED or ON/OFF button is pressed.

13
NOTE:
-Buttons design is based on typical model and might be slightly different
from the actual one you purchased, the actual shape shall prevail.
-All the functions described are accomplished by the unit, if the unit has
no this feature, there is no corresponding operation happened when
press the relative button on the remote controller.
-When there are wide differences between Remote controller Illustration
and USERS MANUAL on function description, the description on USERS
MANUAL shall prevail.
-The device could comply with the local national regulations. In Canada,
it should comply with CAN ICES-3(B)/NMB-3(B). In USA, this device
complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interfe-
rence, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
-This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not approved by the party responsible for
compliance could void suers authority to operate the equipment.

14
NOTES

1
ΠΕΡΙΕΧΟΜΕΝΑ
Χειρισµός του τηλεχειριστηρίου............................................................2
Προδιαγραφές του τηλεχειριστηρίου....................................................3
Λειτουργίες των πλήκτρων....................................................................4
Ενδείξεις στην οθόνη LCD.....................................................................6
Η χρήση των πλήκτρων.........................................................................7
Αυτόµατη λειτουργία.............................................................................7
Ψύξη/Θέρµανση/ Λειτουργία ανεµιστήρα.............................................7
Λειτουργία αφύγρανσης........................................................................8
Λειτουργία κίνησης των περσίδων........................................................8
Λειτουργία χρονοδιακόπτη....................................................................9
Λειτουργία ECO....................................................................................12

2
Χειρισµός του τηλεχειριστηρίου
Η θέση του τηλεχειριστηρίου.
Χρησιµοποιήστε το τηλεχειριστήριο σε απόσταση εντός 8
µέτρων από τη συσκευή, κατευθύνοντάς το προς το δέκτη
της συσκευής.
Η λήψη εντολής επιβεβαιώνεται µε ηχητική ειδοποίηση.
!ΠΡΟΣΟΧΗ
• Το κλιµατιστικό δεν θα λειτουργήσει εάν το σήµα από το
τηλεχειριστήριο µπλοκάρεται από κουρτίνες, πόρτες και άλλα υλικά.
• Αποτρέψτε τη ρίψη υγρών στο τηλεχειριστήριο. Μην αφήνετε
εκτεθειµένο το τηλεχειριστήριο στον ήλιο ή σε θερµότητα.
• Εάν ο δέκτης του κλιµατιστικού είναι εκτεθειµένος στον ήλιο είναι
πιθανόν οι εντολές από το τηλεχειριστήριο να είναι λανθασµένες και το
κλιµατιστικό να µην λειτουργήσει σωστά. Χρησιµοποιήστε κουρτίνες ή
άλλα σκίαστρα για να αποτρέψετε την έκθεση στον ήλιο.
• Εάν ανταποκρίνονται και άλλες συσκευές στο τηλεχειριστήριο,
µετακινήστε αυτές τις συσκευές ή συµβουλευτείτε τον προµηθευτή σας.
Αντικατάσταση των µπαταριών
Το τηλεχειριστήριο τροφοδοτείται από δύο
µπαταρίες οι οποίες τοποθετούνται στο πίσω
µέρος και προστατεύονται από κάλυµµα.
(1) Αφαιρέστε το κάλυµµα πιέζοντας και
σέρνοντάς το προς τα έξω.
(2) Αφαιρέστε τις παλιές µπαταρίες και
τοποθετήστε τις νέες, τοποθετώντας τους
πόλους (+) και (-) σωστά.
(3) Επανατοποθετήστε το κάλυµµα στη θέση του.
ΣΗΜΕΙΩΣΗ: Όταν αφαιρούνται οι µπαταρίες,
υπάρχουσες ρυθµίσεις σβήνουν από την µνήµη
του τηλεχειριστηρίου. Όταν τοποθετήσετε τις
νέες µπαταρίες το τηλεχειριστήριο πρέπει να
επαναπρογραµµατιστεί.

3
!ΠΡΟΣΟΧΗ
• Μην χρησηµοποιείτε νέες µπαταρίες µαζί µε παλιές ή µε µπαταρίες
άλλου τύπου.
Μην αφήνετε τις µπαταρίες στο τηλεχειριστήριο εάν δεν πρόκειται να το
χρησιµοποιήσετε για 2-3 µήνες.
• Απορρίψτε τις παλίες µπαταρίες στους ειδικούς κάδους που βρίσκονται
στα περισσότερα καταστήµατα ηλεκτρικών ειδών.
Χαρακτηριστικά λειτουργιών
1. Τρόπος λειτουργίας: Αυτόµατη λειτουργία, ψύξη, αφύγρανση, θέρµανση
Ένδειξη θερµοκρασίας:
Κλίµακα Κελσίου (°C) : RG51B14/(C)E, RG51B16/(C)E, RG51B18/(C)E, RG51B31/(C)E, RG51B19/(C)E-M,
RG51B20/(C)E, RG51B25/(C)E, RG51B27/(C)E, RG51B30/(C)E, RG51B32/(C)E, RG51B30/(C)EF.
Κλίµακα Φαρενάιτ (°F) : RG51B/(C)EU, RG51B1/(C)EU, RG51B17/(C)EU, RG51B26/(C)EU, RG51B30/(C)EU,
RG51B31/(C)EU.
και λειτουργία ανεµιστήρα.
2. Ρύθµιση χρονοδιακόπτη (επιλογή 24h)
3. Εύρος ρύθµισης εσωτερικής θερµοκρασίας : 17°C 30°C.
4. Λειτουργία της οθόνης υγρών κρυστάλων (LCD)
ΣΗΜΕΙΩΣΗ:
ΣΗΜΕΙΩΣΗ:
Όλες οι εικονογραφήσεις σε αυτό το εγχειρίδιο είναι για επεξηγηµατικούς
σκοπούς µόνο. Το κλιµατιστικό σας µπορεί να διαφέρει ελαφρώς.
Το πραγµατικό σχήµα θα επικρατήσει.
Προδιαγραφές του τηλεχειριστηρίου
ΜΟΝΤΕΛΟ
RG51C/(C)E, RG51C/BG(C)E, RG51B1/(C)EU, RG51B14/(C)E, RG51B31/(C)E12,
RG51B19/(C)E-M, RG51B20/(C)E, RG51B30/(C)EU, RG51B25/(C)E, RG51B26/(C)EU,
RG51B27/(C)E, RG51B30/(C)E, RG51B30/(C)EF, RG51B/(C)EU, RG51B16/(C)E,
GR51B31/(C)EU, RG51B17/(C)EU, RG51B18/(C)E, RG51B32/(C)E
Ονοµαστική τάση 3.0V (Ξηρού τυπού µπαταρίες R03/L03X2)
Χαµηλότερη τάση
σήµατος επεξεργαστή 2.0V
Εύρος λήψης
σήµατος 8m
Περιβάλλον
λειτουργίας -5°C ~ 60°C ( -41ºF ~ 140ºF )

4
ΛΕΙΤΟΥΡΙΕΣ ΤΩΝ ΠΛΗΚΤΡΩΝ
2. Πλήκτρο Temp UP
Πιέστε αυτό το πλήκτρο για να αυξήσετε τη θερµοκρασία
κατά 1°C έως τους 30°C.
1.Πλήκτρο Temp DOWN
Πιέστε αυτό το πλήκτρο για να µειώσετε τη θερµοκρασία
κατά 1°C έως τους 17°C.
3.Πλήκτρο MODE
Κάθε φορά που πιέζετε το πλήκτρο αυτό αλλάζει ο
τρόπος λειτουργίας µε την ακόλουθη σειρά :
Αυτόµατη Ψύξη Αφύγρανση Θέρµανση Ανεµιστήρας
ΣΗΜΕΙΩΣΗ: Η θέρµανση είναι διαθέσιµη µόνο σε µονάδες που
υποστηρίζουν θέρµανση και ψύξη.
Μοντέλα: RG51B25/(C)E;RG51B27/(C)E
RG51B30/(C)EF
ΣΗΜΕΙΩΣΗ:
•RG51B25/(C)E
το µοντέλο δεν έχει λειτουργίες SWING
και FOLLOW ME.
•RG51B27/(C)E το µοντέλο δεν έχει
λειτουργία FOLLOW ME.
•RG51B30/(C)EF το µοντέλο δεν έχει
λειτουργίες ION και SWING, υπάρχει
πλήκτρο ECONOMY αντί για πλήκτρο
SLEEP.
Μοντέλα: RG51B14/(C)E, RG51B16/(C)E,
RG51B18/(C)E, RG51B19/(C)E-M,
RG51B20/(C)E, RG51B31/(C)E
RG51B30/(C)E, RG51B32/(C)E
ΣΗΜΕΙΩΣΗ:
•RG51B16/(C)E ,RG51B18/(C)E
τα µοντέλα δεν έχουν λειτουργία SWING
•RG51B18/(C)E ,RG51B19/(C)E-M,
RG51B20/(C)E τα µοντέλα δεν έχουν
λειτουργία οθόνης LED.
•RG51B19/(C)E-M τα µοντέλα δεν
έχουν λειτουργία MED FAN.
•RG51B31/(C)E στο µοντέλο το πλήκτρο
ECONOMY υπάρχει αντί για το πλήκτρο
SLEEP
•RG51B30/(C)E το µοντέλο δεν έχει
λειτουργίες MED FAN και SWING.
•RG51B32/(C)E το µοντέλο δεν έχει
MED FAN, SWING και ECONOMY
λειτουργίες.
4. SWING Πλήκτρο (Ορισµένες µονάδες)
Χρησιµοποιείται να σταµατάει ή να εκκινεί την κίνηση της
περσίδας και θα θέτει την επιθυµητή κατεύθυνση του αέρα.
5.Πλήκτρο RESET
Όταν πιέσετε το πλήκτρο αυτό θα ακυρωθούν όλες οι
ρυθµίσεις και το χειριστήριο θα επανέλθει στις
εργοστασιακές ρυθµίσεις.
6.Πλήκτρο ON/OFF
Όταν πιέσετε αυτό το πλήκτρο ενεργοποιείται ή
απενεργοποιείται το κλιµατιστικό.
7.Πλήκτρο FAN SPEED
8.Πλήκτρο TIMER ON
9.ECONOMY (SLEEP) Πλήκτρο
Πιέζοντας το πλήκτρο αυτό επιλέγετε την ταχύτητα του
Πιέστε το πλήκτρο αυτό για την αυτόµατη ενεργοποίηση της
συσκευής µε τον χρονοδιακόπτη. Κάθε πάτηµα του πλήκτρου
αυξάνει το χρόνο κατά 30 λεπτά, έως τις 10 ώρες, και κατά
1 ώρα έως τις 24 ώρες. Για την ακύρωση της ρύθµισης,
κρατήστε πατηµένο το πλήκτρο ώσπου να ανάψει στην
οθόνη το 0.0 .
Επιλέξτε τη ρύθµιση αυτή κατά την διάρκεια του ύπνου.
Μπορεί να διατηρήσει την θεµιτή θερµοκρασία και να
εξοικονοµήσει ενέργεια. Η λειτουργία αυτή έιναι διαθέσιµη
µόνο στις ρυθµίσεις ψύξης, θέρµανσης και αυτόµατη
λειτουργία.
ανεµιστήρα µε την ακόλουθη σειρά:
Αυτόµατη Χαµηλή Μεσαία Υψηλή
TEMP
AUTO
COOL
DRY
HEAT
FAN
HIGH
MED
LOW
MODE FAN SPEED
SWING TIMER ON
ECONOMY
ON/OFF
TIMER OFF
RESET LOCK
12
4
3
6
5
7
8
9
10
11
SET TEMPERATU RE( C)
LED
DISPLAY
12
TE MP
AUTO
COOL
DRY
HEAT
FAN
HIGH
MED
LOW
MODE FAN SPEED
TIMER ON
ECONOMY
ON/OFF
TIMER OFF
RESET LOCK
12
3
6
5
7
8
9
10
11
SET TEMPERATURE( C)
LED
D ISP LAY
12
ION
14
SWING
4
F OLLO W
ME
13

5
ΛΕΙΤΟΥΡΙΕΣ ΤΩΝ ΠΛΗΚΤΡΩΝ
ΣΗΜΕΙΩΣΗ: Όταν η συσκευή λειτουργεί στη λειτουργία
εξοικονόµησης ενέργειας, θα ακυρωθεί εάν πιέσετε πλήκτρο
ρύθµισης FAN SPEED ή το πλήκτρο ON/OFF.
12. LED Πλήκτρο Οθόνης
Πατήστε αυτό το πλήκτρο να καθαρίσετε την οθόνη της
εσωτερικής µονάδας και πατήστε ξανά ώστε να φωτίσετε
την οθόνη.
ΣΗΜΕΙΩΣΗ: RG51B18/(C)E ,RG51B19/(C)E-M,
RG51B20/(C)E τα µοντέλα αυτά δεν έχουν αυτή τη
λειτουργία.
13. FOLLOW ME/ TEMP. SENSING Πλήκτρο
Πατήστε αυτό το κουµπί να εκκινήσετε τη λειτουργία
FOLLOW ME.
Όταν εκκινήσει η λειτουργία FOLLOW ME, το τηλεχειρι-
στήριο δείχνει τη θερµοκρασία. Το τηλεχειριστήριο θα
στέλνει αυτό το σήµα στο κλιµατιστικό κάθε 3 λεπτά µέχρι
να πατήσετε το πλήκτρο FOLLOW ME ξανά.
Η λειτουργία FOLLOW ME δεν διατίθεται για λειτουργίες
DRY και FAN. Η αλλαγή λειτουργίας ή η απενεργοποίηση
της µονάδας θα ακυρώσουν τη λειτουργία FOLLOW ME
αυτόµατα.
14. ΙΟΝ Πλήκτρο
Όταν πατήσετε αυτό το κουµπί, ο ιονιστής ενεργοποιείται
και βοηθά στην αποµάκρυνση γύρης και ρύπων από τον αέρα.
10. Πλήκτρο TIMER OFF
Πιέζοντας το πλήκτρο αυτό ενεργοποιείται η λειτουργία
Μοντέλα: RG51B1/(C)EU,
RG51B/(C)EU,
RG51B26/(C)EU,
RG51B30/(C)EU,
RG51B31/(C)EU.
ΣΗΜΕΙΩΣΗ:RG51B/(C)EU τα
µοντέλα δεν έχουν SWING και
FOLLOW ME πλήκτρα.
RG51B1/(C)EU τα µοντέλα δεν
έχουν πλήκτρο FOLLOW ME.
RG51B30/(C)EU τα µοντέλα δεν
έχουν πλήκτρα SWING, FOLLOW ME
και MED FAN λειτουργία και έχουν
πλήκτρο SWING αντί για πλήκτρο
ECONOMY.
RG51B31/(C)EU τα µοντέλα έχουν
πλήκτρο FOLLOW ME.
Μοντέλα: RG51B17/(C)EU
αυτόµατης απενεργοποίησης της συσκευής µε τον
χρονοδιακόπτη. Κάθε πάτηµα του πλήκτρου αυξάνει τον
χρόνο κατα 30 λεπτά, έως τις 10 ώρες και κατά 1 ώρα έως
τις 24 ώρες. Για την ακύρωση της ρύθµισης, κρατήστε
πατηµένο το πλήκτρο ώσπου να ανάψει στην οθόνη το 0.0 .
11. Πλήκτρο LOCK
Πιέστε αυτό το πλήκτρο για να κλειδώσετε τις υπάρχουσες
ρυθµίσεις, το τηλεχειριστήριο θα κλειδώσει και δεν θα
δέχεται εντολές εκτός από την εντολή LOCK.
Χρησιµοποιήστε αυτή τη λειτουργία για να αποτρέψετε την
κατά λάθος αλλαγή των ρυθµίσεων. Πιέστε το πλήκτρο
ξανά για να ακυρωθεί αυτή η λειτουργία. Όταν η λειτουργία
είναι ενεργή θα ανάψει ένδειξη κλειδώµατος στην οθόνη.
TEMP
AUTO
COOL
DRY
HEAT
FAN
HIGH
MED
LOW
MODE FAN SPEED
SWING TIMER ON
SLEEP
ON/OFF
TIMER OFF
RESET LOCK
SET TEMPERATURE( F)
TEMP
SENSING LED
DISPLAY
ION
13
14
9
TEMP
AUTO
COOL
DRY
HEAT
FAN
HIGH
MED
LOW
MODE FAN SPEED
SWING TIMER ON
ECONOMY
ON/OFF
TIMER OFF
RESET LOCK
SET TEMPERATURE( F)
LED
DISPLAY
FOLLOW
ME