IOGear GWAV8141K User manual

Installation
Installation Guide
Wireless HD Kit
GWAV8141K

3
Table of Contents
Package Contents 4
Overview 5
Wall Mount 7
Installation 8
Remote Control 12
Selecting Specic Ports 14
LED Indication 14
IR Blast 15
IR Extender 15
Video Format Support 15
Audio Format Support 15
Connection Between the Transmitter Unit and Receiver Unit 16
Factory Reset 16
Firmware Upgrade / Conguration Update 17
Streaming Mode 17
FCC Statement 17
CE Compliance 17
Limited Warranty 18
Contact 18

4
Package Contents
1 x Wireless HD Transmitter
1 x Wireless HD Receiver
1 x Remote Control
2 x Wireless HD Stand
1 x Component to VGA Adapter
1 x IR Blast
2 x Power Adapter
1 x Installation Guide
1 x Warranty Card

5
Overview
Transmitter Unit
Front View
Power/Link LED1.
HDMI1 LED2.
HDMI2 LED3.
PC LED4.
AV LED5.
IR Receiver6.
Front Panel Pushbutton7.
*Note: For the audio part of a Component media source, please use the PC Audio Input Port with a 3.5mm
to RCA Cable (Not included and sold separately – IOGEAR Part No: G2LMMRCA006).
**Note: If you wish to use the PC Video Input Port for Component (YPbPr) media source, please use the
included Component to VGA Adapter.
Rear View
HDMI2 Input Port8.
HDMI1 Input Port9.
AV Input Port (Composite)10.
IR Blast Output Port11.
PC Audio Input Port12.
(3.5mm Mini Stereo Jack)*
PC Video Input Port (VGA)**13.
LAN Port14.
DC Power Jack15.
1
2
4
6
3
5
7
8
9
10
11
12
13
14
15

6
Receiver Unit
Front View
Power/Link LED1.
HDMI LED2.
Component LED3.
AV LED4.
IR Receiver5.
Front Panel Pushbutton6.
*Note: IR Extender not included.
**Note: For the audio part of a Component media source, please use the PC Audio Input Port
with a 3.5mm to RCA Cable (Not included and sold separately – IOGEAR Part No:
G2LMMRCA006).
Rear View
HDMI Output Port7.
AV Output Port (Composite)8.
IR Extender Input Port*9.
PC Audio Output Port (3.5mm Mini10.
Stereo Jack)**
Component Video Output Port (YPbPr)11.
USB Firmware Upgrade Port12.
LAN Port13.
DC Power Jack14.
1
2
4
6
3
9
10
12
13
14
5
7
11
8

7
Wall Mount
Hang the unit on the wall by using the two screw holes on the unit.
2
1

8
Installation
Note: Please make sure your displays and media sources are turned off before you start.
1 HDMI Media Source
Connect a HDMI cable from the media
source’s HDMI output to the transmitter unit’s
HDMI input
2 VGA Media Source
Video – Connect a VGA cable from the
media source’s VGA output to the
transmitter unit’s VGA input
Audio – Connect a 3.5mm stereo audio cable
(Not included and sold separately -
IOGEAR Part No: G2LMM006) from
the media source’s audio output to the
transmitter unit’s PC Audio-In port
3 Composite Media Source
Connect a composite cable from the media
source’s composite output to the transmitter
unit’s composite input
Step 1
Connect your media sources to the transmitter unit.
4 Component Media Source
Video – Connect the included Component
to VGA Adapter to the VGA Input of
the transmitter unit, then connect
a Component video (YPbPr) cable
from the media source’s Component
output to Component connection of
the Component to VGA Adapter
Audio – Connect a 3.5mm to RCA cable
(Not included and sold separately –
IOGEAR Part No: G2LMMRCA006)
from the media source’s audio output to
the transmitter unit’s PC Audio-In port
2
13
Blu-ray Player
VCR
PC
DVR
4
4

Note: If the location of the IR sensor for your media source is not found, you can point the
media source’s remote directly in front of the media source, then search for the IR sensor’s
location by controlling the media source in different area in the front panel until you nd the
spot that the media source can be able to received the signal from the remote control.
9
Step 2
Connect the IR Blast to the IR-Out Port from the Transmitter unit. Then stick the IR blast
directly in front of each of the IR sensor of your media source devices

10
1 HDMI
Connect a HDMI cable from the receiver
unit’s HDMI output to your display’s HDMI
input
2 Composite
Connect a Composite cable from the receiver
unit’s AV output to your display’s Composite
input
Step 3
Connect the receiver unit to your display with either one of the three different connections.
Step 4
Connect the power adapters from the wall
outlet to the transmitter unit and receiver unit.
Then the transmitter unit and receiver unit will
turn on automatically.
3 Component
Video – Connect a Component Video
(YPbPr) cable from the receiver unit’s
Component output to your display’s
Component input
Audio – Connect a 3.5mm to RCA Cable
(Not included and sold separately –
IOGEAR Part No: G2LMMRCA006)
from the receiver unit’s PC Audio
Output port to RCA ports of the
component input of your display
2
1
3
TV Back