IOGear GWAVRC User manual

Quick Start Guide
Wireless Screen Sharing
www.iogear.com
GWAVRC
PART NO. Q1542-a

3
Table of Contents
© 2019 IOGEAR®Part No. Q1542
IOGEAR, the IOGEAR logo, are trademarks or registered trademarks of IOGEAR. Microsoft and
Windows are registered trademarks of Microsoft Corporation. All other brand and product names
are trademarks or registered trademarks of their respective holders. IOGEAR makes no warranty of
any kind with regards to the information presented in this document. All information furnished here
is for informational purposes only and is subject to change without notice. IOGEAR assumes no
responsibility for any inaccuracies or errors that may appear in this document.
Introduction 4
Features 4
Package Contents 5
System Requirements 5
Overview 6
Hardware Installation 7
Installation for Android based tablets and phones 9
Windows®10 12
Compliance Information 15
Limited Warranty 15
Contact 15

4 5
System Requirements
PC (Minimum Requirements)
• Intel Core i5 4th Gen or AMD Phenom II X4 equivalent or newer
• 8GB or more of system memory (RAM)
• Wireless networking capability
Operating Systems
• Windows®10
Smartphones and Tablets
• Wi-Fi Miracast™ certied
• Android 4.2 or later
• Windows®10 or later*
Display
• HDTV or Projector with HDMI port
*This product will not work with Apple iOS & Mac OS
Package Contents
Introduction
Features
1 x Wireless A/V Receiver
1 x Power Adapter
1 x Micro USB Power Cable
1 x HDMI Cable
1 x Quick Start Guide
1 x Warranty Card
IOGEAR’s Wireless Screen Sharing kit allows you to enjoy all of your
personal and online content wirelessly on your big screen HDTV.
Using your smartphone, tablet or Windows®based computer, you can
sit back and experience your favorite movies, videos, photos, online
shows and more in Full HD on your HDTV with great image, clarity
and sound.
Note: For a list of known Miracast-certied devices, please visit:
http://www.wi-.org/discover-wi-/wi--certied-miracast
• Wirelessly send your favorite videos, photos, music and Internet
content from your Smart Phone, Tablet or Laptop to your HDTV, HD
Projector or HD Display
• Full HD 1080p video resolution playback support
• Works with Miracast™ certied devices
• Ideal solution for sharing PC content wirelessly at Home, at the
O󰀩ce and in the Classroom

DC 5V
MODE
6 7
DC 5V
MODE
5
Receiver:
A. Power LED
B. HDMI Out (to TV)
C. Mode Switch
D. USB Micro-B Power Port
Set up the Wireless A/V Receiver
1. Connect one end of the included HDMI Cable into an available
HDMI input on your HDTV or HD Projector.
2. Connect the other end of the HDMI cable to the HDMI port on the
Wireless A/V Receiver.
3. Plug the Micro USB end of the Power Cable into the USB-Micro B
power port on the Wireless A/V Receiver.
4. Plug the other end of the USB Power Cable into the USB Power
Adapter included in the package. Then plug the USB Power
Adapter into an available power outlet.
5. The Power LED will light solid blue.
Overview Hardware Installation
2
3
4
1
A
B
C
D

8 9
6. Turn on your TV or projector, and make sure you select the correct
video input that you connect your GWSSKIT receiver to. The
IOGEAR ash screen will come up on the display and on
the top left of the screen will be the device name IOGEAR-xxx.
Determine if you’re connecting via Wi-Fi Direct or connecting via
USB Wi-Fi adapter
Most Android based mobile devices supports mirroring screen from
the devices to the IOGEAR receivers, then to the TV. It is done by
going to Settings or Options on the phone, below examples are for
specic phones, your phone may show di󰀨erent screens, generally
you can nd these options under Screen or Display options, with
terms like Screen Mirroring, or Smart View”.
Android devices
1. On your Home screen. Using two ngers, swipe down from the
top of the screen and “Options” menu will appear. From the
Options menu choose “Smart View” (some older version may
label it “Screen Mirroring”).
Installation for Android based tablets and phones

10 11
2. Your device will start searching for the Wireless A/V Receiver.
Once the receiver appears, tap on it to connect.
3. After you initiate the connection, wait a few seconds for your
device to establish the connection with the wireless receiver.
When a black screen displays on both the TV and your device,
the connection has been established. The technical term for this
is “sync”, and the two devices have now synced with each other.
After a connection is established you should be able to see a
mirror image of your device on the big screen TV; whatever you
do on your mobile device will be duplicated on the big screen
from this point and on.
To disconnect from the TV, you can either turn o󰀨 your device or
disconnect from the Display options screen.

12 13
For computers with Windows®10 you can hold down Windows®key + “p”
or go to “Setting” and choose “Display”. If you see an option for “Connect
to a wireless display”, your computer is Wi-Fi Direct ready.
If you don’t see any of the aforementioned options, then you need
to use the wireless USB adapter to establish a connection. (Go to
page 17 to see detailed steps). If you see the above screen, click on
“Connect to a wireless display”. Windows®will now search for the
GWSSKIT, the name will be IOGEAR-xxxx.
Windows®10
Click on the name IOGEAR-xxxx and connection will initiate. Give
a few seconds, the TV and project will change to the exact same
screen as your Windows®10 computer.
Once you have established connection Windows will mirror your
content to the big screen. This screen will indicate that the connection
is now established and you can click on “Disconnect” when you no
longer want to mirror to your TV.

14 15
To disconnect, simply click on “Disconnect and Windows will terminate
the connection.
Compliance Information
FCC Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential setting. This product generates, uses, and can radiate
radio frequency energy and, if not installed and used as directed, it may
cause harmful interference to radio communications. Although this product
complies with the limits for a Class B digital device, there is no guarantee
that interference will not occur in a particular installation.
This product carries a 1 Year Limited Warranty. For the terms and conditions of
this warranty, please go to https://www.iogear.com/support/warranty
Register online at https://www.iogear.com/register
Important Product Information
Product Model _________________
Serial Number _________________
Limited Warranty
Contact
WE’RE HERE TO HELP YOU! NEED ASSISTANCE SETTING UP
THIS PRODUCT?
Make sure you:
1. Visit www.iogear.com for more product information
2. Visit www.iogear.com/support for live help and product support
www.iogear.com | https://iogear.custhelp.com | [e-mail]

© 2019 IOGEAR®