IOGear GHDSW4K4 Q1326 User manual

4-Port 4Kx2K HDMI Switch with Remote
Quick Start Guide
GHDSW4K4
PART NO. Q1326
www.iogear.com

2
1
4
3
INPUT SELECT
1
Package Contents
Requirements
Overview
1 x GHDSW4K4 4-Port HDMI Switch
1 x IR Remote
1 x Quick Start Guide
1 x Warranty Card
Display:
HDMI HDTV, Display or Projector
Source:
Media source with HDMI Out
REMOTE
Remote:
1. Select Next Port
2. Port 1
3. Port 2
4. Port 3
5. Port 4
1
2
4
3
5

2
Switch:
1. Input Port 1
2. External IR
Receiver Port (Optional)
3. IR Receiver
4. Port 1 LED
FRONT VIEW
BACK VIEW
5. Port 2 LED
6. Port 3 LED
7. Port 4 LED
8. Output Port LED
9. Port Selection Button
10. Input Port 2
11. Input Port 3
12. Input Port 4
13. Output Port
14. USB Power Port (Optional)
5V/1AOUTPUTINPUT 2 INPUT 3 INPUT 4
SELECT
INPUT 1 IR Ext 1 2 3 4 OUT
1
10 11 12 13 14
2 3 4 5 6 7 8 9

3
Installation
STEP 2
Connect any HDMI media devices to the input ports of the HDMI
switch. The switch will automatically power on when a powered
HDMI device is connected.
STEP 1
Connect an HDMI cable from the output port of the switch to
any available HDMI input on your HDTV, HD projector or
HDMI display.
5V/1AOUTPUTINPUT 2 INPUT 3 INPUT 4
5V/1AOUTPUTINPUT 2 INPUT 3 INPUT 4
Note: The switch will automatically select the input that a
powered HDMI device is connected to

4
Compliance Information
FCC Statement
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential setting. This
product generates, uses, and can radiate radio
frequency energy and, if not installed and used as
directed, it may cause harmful interference to radio
communications. Although this product complies
with the limits for a Class B digital device, there is no
guarantee that interference will not occur in a
particular installation.
CE Compliance
This device has been tested and found to comply
with the following European Union directives:
Electromagnetic Capability (2004/108/EC), Low
Voltage (2006/95/EC) and R&TTED (1999/5/EC).
STEP 3
Use the remote control or front panel selection button to switch
to the desired port, then power on your HDTV or HD display
and media source.

WE’RE HERE TO HELP YOU!
NEED ASSISTANCE SETTING UP THIS PRODUCT?
Make sure you:
1. Visit www.iogear.com for more product information.
2. Visit www.iogear.com/support for live help and
product support.
Warranty Information
This product carries a 1 Year Limited Warranty. For the
terms and conditions of this warranty, please go to
http://www.iogear.com/support/warranty.
Register online at http://www.iogear.com/register
Important Product Information
Product Model
Serial Number
Contact
Limited Warranty
iogear.custhelp.com
[e-mail]
www.iogear.com
19641 Da Vinci, Foothill Ranch, CA 92610