ION IT103 User manual

Splendid real time
Wireless Turntable with Built in Speakers
User Manual

BEFORE USE
1. Choose a safe location and avoid placing the unit in direct sunlight or near any
heat source.
2. Avoid locations subject to vibrations, excessive dust, cold or moisture.
3. Do not open the cabinet as this may result in electrical shoc . If a foreign object is
inserted accidentally contact your dealer.
4. When removing the power plug from the wall outlet, pull directly on the plug, not
the cord.
5. Do not attempt to clean the unit with chemical solvents as this might damage the
finishing. A clean, dry cloth is recommended for cleaning.
6. Keep this manual for future reference
Turntable Parts & Features

1. AUTO STOP ON/OFF switch
2. 33/45/78 RPM switch – This switch controls the speed of the turntable platter.
3. Bluetooth Button---Press this button to start Bluetooth pairing. If after 5 minutes no
Bluetooth spea er can be found to pair with, the Bluetooth transmitter will become
inactive and the LED will turn off. If currently connected, press this to disconnect from a
currently connected Bluetooth device.
4. AUX IN jac
5. Bluetooth Volume-Adjust this to control the Bluetooth output level
6. Power on/off and volume control nob --Adjust this to control the unit output level and
power on off.
7. Headphones jac —to connect headphones or earphones to enjoy music privately
8. Stylus—there is a white stylus protector covering on the stylus, remove it before use.
9. Tone arm – The turntable comes with a ready to use pre-balanced tone arm and cartridge.
10. Platter – Place your record here.
11. 45 RPM adapter –used for 45RPM vinyl records
12. USB Audio output: Use the included USB cable to connect your turntable to your
computer to record music from vinyl to your computer.
13. DC IN port – Used to connect power adapter
14. RCA output – Used to connect to external spea ers (not included)
GETTIING STARTED
Fix the dust cover onto the turntable.
Firmly and securely insert the DC plug of the adaptor to the DC IN Jac on the bac of the
unit.
Plug the adaptor’s AC plugs into a power outlet.
VINYL RECORD PLAYBACK
1. Turn the power & volume control nob cloc wise. The indicator light will illuminate red.
2. Place a record on the turntable platter and select the desired speed (33/45/78) according to
the record.
NOTE: when playing a 45RPM record, use the included 45RPM adapter located in the holder
besides the platter (one more 45RPM adaptor can be found in the accessory bag).
3. Remove the stylus protector. Open the tone arm clip to release the tone arm. Push the lift
lever (it is besides the auto stop switch) bac ward to raise the tone arm and gently move the
tone arm to the desired position over the record. You can turn the pitch control nob to adjust
the speed of the platter little by little. The turntable will begin to spin when the tonearm is
moved toward the record (when the AUTO STOP switch is ON). Push the lift lever forward to
lower the tone arm slowly onto the desired position on the record to start playbac .
(Note: when you push the lift lever forward, do not push it beyond the position of the tone
arm clip)
4. If the Auto Stop Control Switch is turned ON, the record will stop automatically when
finished. If Auto Stop Control Switch is turned OFF, the record will NOT stop automatically
when finished.

Remar : AUTO STOP function applies to most 33RPM vinyl records. However, for very few
vinyl records, it will stop when it does not come to the end (in this case, turn the AUTO STOP
switch to OFF position and then it will continue playbac ), or it will not stop when it comes
tothe end when AUTO STOP is ON.
PC Rec rding
To record music to your computer, you can use ION EZ Vinyl/Tape Converter and a USB
cable. EZ Vinyl/Tape Converter conveniently saves your recordings to your computer. After
you finish converting your vinyl, you can then burn to CD or load onto portable media
devices.
Follow the instructions on the included software download card for installing EZ Vinyl/Tape
Converter.
1. With EZ Vinyl/Tape Converter installed on your computer, use the included USB cable to
connect USB port to an available USB port on your computer.
2. On your computer, you can open EZ Vinyl/Tape Converter by going to Start Menu  All
Pr grams (Windows) or the Applicati ns menu (Mac).
3. Follow the on-screen instructions to set up your recording. When prompted to play your
music, move tonearm over the record to start playbac .
AUX IN
Connect your iPod, MP3 player, mobile phones etc. to the AUX IN port with a 3.5mm-3.5mm
audio cable (not included).
You can play music from an auxiliary device through the unit.
Turn the VOLUME CONTROL KNOB to adjust the volume. (The iPod, MP3 player, mobile
phones’ volume control may also impact on Volume Level so ensure this is also turned up).
Bluet th Transmitter t Send Audi t a Bluet th Speaker Wirelessly
1. Power on your Bluetooth spea er and ensure it is in pairing mode.
2. Power on the turntable
3. Press and release the Bluetooth button to start pairing to your Bluetooth device. Once is
connected to the Bluetooth spea er, the Bluetooth LED will be solid blue. Your Bluetooth
spea er should also indicate that it ’ s paired.
4. Play music on your turntable. If you are connected to a Bluetooth spea er with a play/pause
button, and do not hear audio, try pressing the play/pause button.
5. Adjust the Volume on your Bluetooth spea er (if applicable) or the Bluetooth nob on
turntable to control the output level.
6. To disconnect pairing power off the turntable or turn of Bluetooth pairing on your
Bluetooth spea er.
MUSIC PLAYBACK n y ur wn speaker system
Connect your own spea er system to the RCA port with a RCA-3.5mm audio cable (not
included).
You can enjoy the music of the vinyl records at your own spea er system.

How to Replace the Turntable Stylus (Needle)
Removing the Stylus from the Cartridge
1 Place a screwdriver at the tip of the stylus and push downward as shown in direction
“A”
2 Remove the stylus by pulling the stylus forward and pushing downward
Installing the Stylus
1 Hold the tip of the stylus and insert the stylus by pressing as shown in direction “B”
2 Push the stylus upward as in direction "C" until the stylus locks into the tip position
TIPS FOR BETTER TURNTABLE PERFORMANCE
1 When opening or closing the turntable cover, handle it gently, gripping it either at the
centre or at each side
2 Do not touch the needle tip with your fingers; avoid bumping the needle against the
turntable platter or record edge
3 Frequently clean the needle tip-use a soft brush in a “back-to-front’ motion only
4 If you must use a needle cleaning fluid, use very sparingly
5 Gently wipe the dust cover and turntable housing with a soft cloth Use only a small
amount of mild detergent to clean the turntable and dust cover
6 Never apply harsh chemicals or solvents to any part of the turntable system