IP Power 9258W2 User manual

- 1 -
IP Power 9258W2
User Manual
Firmware Version: 2.10
Date Released: Apr. 2014

- 2 -
Warning: Any changes made to this equipment without permission may cause damages to the device!
IMPORTANT NOTICE
1. IP Power 9258W2 was designed for indoor use, we carry no responsibility for possible
damages caused by outdoor use, especially in the rain.
2. Please use the power adapter provided by the dealer, we carry no responsibility for the
possible damage from using power adapters not provided by us .
4. Do not shake the IP Power 9258W2 in any fashion
5. Please contact the dealer If IP Power 9258W2 is not working properly.
Copyright © 2013 All rights reserved. No part of this publication may be reproduced, stored in a
retrieval system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording or otherwise, without the prior written consent of us.
All trademarks and products mentioned in this document are the properties of us.

- 3 -
Table of Content
WELCOME...........................................................................................................5
Introduction .................................................................................................................................................. 5
PRODUCT OVERVIEW........................................................................................6
Features......................................................................................................................................................... 6
Specification.................................................................................................................................................. 7
Minimum System Requirements................................................................................................................. 7
Package Contents ......................................................................................................................................... 8
INTERFACE DESCRIPTION................................................................................9
Front View..................................................................................................................................................... 9
Rear View.....................................................................................................................................................11
Rear View.................................................................................................................................................11
Fuse replacement.........................................................................................................................................12
SETTING UP YOUR DEVICE.............................................................................12
Before we Start ............................................................................................................................................12
Hardware Connection.................................................................................................................................13
Software Installation ...................................................................................................................................13
Installing Software....................................................................................................................................13
Connection by WiFi- WPS ( WiFi Protection Service ) ...........................................................................15
Connection first by LAN –Network cable then setup for WiFi connection..............................................18
Internet Setup............................................................................................................................................23
Using IP Server.........................................................................................................................................24
WEB INTERFACE..............................................................................................26
Connect to your Device..............................................................................................................................26
Device name .............................................................................................................................................28
Information :.............................................................................................................................................29
IO Control :...............................................................................................................................................30
Network :..................................................................................................................................................48
Application Settings..................................................................................................................................58
System Setting..........................................................................................................................................71
CONTROLLING THE DEVICE...........................................................................76

- 4 -
By IR Remote Controller............................................................................................................................76
CGI HTTP Commands...............................................................................................................................77
Telnet Control..............................................................................................................................................79
Serial Com (RS-232) Control......................................................................................................................79
FAQ :..................................................................................................................80

- 5 -
Welcome
Introduction
IP Power 9258W2 is a new generation of the Power Distribution Unit (PDU) & Remote Power
Control (RPC) system. Its able to connect to the WiFi network plus WPS function for easy &
quick to set up a device to user wireless home/office network and control in the network
With embedded web server and HTTPS protection , 9258W2 supports higher grade security as
working on Internet. User can control power easily and more safely through the web browser on
Windows PC or on Smartphone like Internet Explorer (IE) , Firefox , Google
Chrome , Safari ( iOS ) and Android system.
9258W2 allows user to remote control power up to 4 separate devices on/off via network . As
support SSL & SNMP, user can use public email like Gmail / Hotmail / Yahoo Mail to get the
email as the ON/OFF status change . User can also control by e-mail without doing port
forwarding / port mapping and search the other IP Device in webpage directly .
Besides contorl through web browser , there is Android Apps name “IP Power “ for Android
user to control the outlet power turn ON / OFF, get the meter reading
of Current / Voltage / Temperature and quick search device in LAN / WAN Android phone /
touch panel . User can also use the IR remote controller which comes with 9258W2 to
control outlet on & off directly by the handheld remote controller without need PC operation ,
specially benefit in no networking . no PC system environment or emergency use for quick
response in second.
Not only control manually, 9258W2 supports Auto Ping , Time Scheduler which is more
suitable for factory / office / home automation .
Besides power control , through 9258W2 , user can also check the power usage WH ( watt per
hour ) , current consumption of each port , and Temperature value , LOG information &
send LOG to assign IP(Syslog) , get consumed history & LIVE Line Chart in webpage.
IP Power 9258W2 also can connect USB Camera to view the area near 9258W2. For smart
phone customer , 9258W2 has QR code of different network to log in fast and easy. Use can
directly search the other IP Device in webpage directly .
For system integrator, there are several popular developing tolls like TelNet , SNMP and HTTP
Command ( SDK) for 2nd development . The various applications of the 9258W2 includes:
Power Management, Server Management, Internet Controllable Timer,
System Integration, Remote Power Control in Remote locations ………….. etc.
User Friendly . Convenience & Powerful ,

- 6 -
Product Overview
Features
1. 4 ports Remote power controller for power On, Off and Reboot.
2. Web Server built-in design, directly control by web browser –PC & Smart phone :Internet
Explore (IE) , Firefox , Google Chrome, Safari - iPhone and Android browser of smart
phone. ( Windows , Android & iOS) .
3. Android Apps “IP Power “ – free supply
-Controls the outlet power ON/OFF
-Read the meter of Current / Voltage / Temperature
-Quick search in LAN / WAN ( liek IPEDIT & IP Serice )
4. Support WiFi - Wireless 802.11 N/ B/ G and WPS connection
( WPA-PSK, WPA2-PSK, AES,128-bit WEP,64-bit WEP,TKIP, WPA2,WPA )
5. Support HTTPS , SSL, TCP/ IP , PPPOE, DHCP, DDNS & SMTP
6. Control 4 individual outlet power ON & OFF .
-ax. current per port : 8 Amp
-Max. current total 4 outlets: 10 Amp or
240 Watt for light control like T5 Fluorescent Light
7. Detect the consumed Current & Temperature value & LIVE line chart display
-Current range : 0A ~ 10A
-Temperature : 0 ~ 60℃/ 32 ~ 140℉. The tolerance of above 3 items are ±5%
8. Live chart display the value of WH ( watt per hour) , Current Amp , Voltage &
Temperature.
9. Support " Inrush Current " for T5 fluorescent light for light control
10. Power Surge protection & FUSE embedded in
11. Support Log function & send to assign IP address (Syslog)
12. Save History as CSV file for application .
13. Support USB for Camera or Flash Drive.
-USB Webcam ( W/ UPNP , M-JPG /YUV) to view the environment.
-USB Flash Drive for saving history / log information.
14. Convenience design for Smartphone :
-Webpage : easy to Control ON/OFF& get meter value
-Android APP “ IP Power”

- 7 -
-QR Code : create QR code of the 9258W2 IP address
15. Time Schedule - can pre-set a suitable time to turn power on / off automatically .
16. Support handheld IR Remote controller to control without PC
17. Support Auto Ping for auto control management.
18. Back Up function for quick setup for multiple devices like Time Schedule, Network
Setting
19. E-mail control function & E-mail alarm :
-Receive Email with Current , Voltage & Temperature info. as device boot up.
-Email alarm as over setting at Current and temperature
-POP3 Control : Control each outlet ON/OFF through E-mail .
Support public e-mail -- @gmail.com , @yahoo.com , @hotmail. com ..........etc.
20. Embedded IP Manager to search other IP device in local network in webpage directly.
-Specific software developed by Aviosys and provided free of charge :
-SDK Available : HTTP Command
-IP Power Center - for control multiple Aviosys IP devices in same software
-CNT software ( Cross Network Technology )- allows user eliminate set up work on any
Router without port forwarding , simply Plug & Play .
Specification
Power input : 100V - 240V
Maximum loading of each output: 8 amp
Maximum of Total loading : 8 amp
Fuse protection : 10 amp ( with spare fuse in socket )
Dimensions: 200 x 140 x 50 mm ( L x W x H )
Weight: 990g
Enclosure –Matel case in blue color
Minimum System Requirements
WINDOS PC OS with network capacity.
Browser : IE 9.0 or above , Firefox, Google Chrome , Safari
RJ45 LAN & Internet HUB & Switch
JAVA version 1.60 or above to check USB Webcam under web browser Internet Explorer -IE
Internet ( for remote access) or Ethernet Network ( Internal Network use) with some type of
Internet connection, (i.e. ADSL, Cable, Dial up or any other forms of Internet service)

- 8 -
Package Contents
1. 9258W2 Unit x 1
2. IR Remote Power Control
3. 9258W2 Installation CD
4. WiFi Antenna
X 2 pcs
5. RJ45 Cable x 1 (option)
6. Input Power Cable (option)
Please double check the power cable compatible
for 10 amp current loading .

- 9 -
Interface Description
Front View
Power Status Indicator:
The Power Status Indicator - Green light ON
as power ON.
Reset :
There are two functions for this button.
* Enable WPS function by one short click
There is one long beep as enable WPS
function. Please refer page #16 for details.
* Set back to default setting by long press
To reset to original manufacture settings, hold
down the reset button with a sharpen pin for
5- 6 seconds then release. There are THREE
beeps response ( short –- mid long –short )
which means reset successfully and
9258W2 will be rebooted itself ( one beep after
reboot ) and most information go back to
default setting ( LAN IP )
Restart :
The restart button just resets the device by
turning off and then turning on the power.
Link:
The Link Indicator shows the WiFi signal
transfer status. The light will be ON all the time
and flashing while transfer data.

- 10 -
IR Receiver :
This area is for receiving the signal from
handheld IR remote controller which comes in
shipping package.
Network:
10/100 Mbps network
USB:
USB 2.0 for USB Web Camera. (With UPNP &
video format as M-JPG / YUV )
RS232 Serial Port Console :
Optional –for OEM/ODM only

- 11 -
Rear View
Rear View
4 Output Power Ports:
Connect up to 4 separate devices
that will be controlled by the
9258W2. Ports 1 - 4
1 Input Power Port :
In this socket, there is power input
and Fuse socket .
The input power sends power
to the 9258W2.
Fuse : To prevent electrical
surges from damaging the unit.
The 9258W2 comes with one
spare fuse in the unit.
TYPE：U/C GFE 10A 250V (PF)
1 Power Switch:
The Power switch turns on the
input power.

- 12 -
Fuse replacement
1.) The fuse is located between the power switch and the power input plugs.
2.) Carefully remove the fuse holder with a flat screwdriver.
3.) The fuse can be purchased from electronic shops.
Specification : U/C GFE 10A 250V (PF)
Setting up your device
Before we Start
*Before setting up the device make sure of the following:
1.) All the package contents are all included if anything is missing please contact the dealer
where the device was purchased from.
2.) Check the power input cable is working correctly.
3.) Check all cables to make sure there are no problems with it.

- 13 -
Hardware Connection
Please refer following procedure :
1.) Connect the Ethernet cable (RJ45) to the 9258W2 to your local area network.
2.) Then connect the power cable into the power input port of the 9258W2.
3.) Connect the device that you would like to control to the output plug on the top of the 9258W2.
4.) Switching the power source to ON status , this switch is located at the rear of 9258.
5.) After power on for around 45 seconds , there is a short beep sound for 9258W2 which
means the system reboot successfully
6. ) Go to page #14 for software installation guide –use IP EDIT to log in the webpage of
9258W2.
Note: To change the network setting for WiFi connection ( if your Router without WPS function ) ,
please go to page # 12 to setup the WiFi connection manually .
Software Installation
The Media Link - IP Family CD comes with the device , it will have all the necessary software to
run and setup the device.
IP Power Software:
IP Edit (Required)
IP Power Center *( For multiple IP Power devices control )
Installing Software
1.) Place the Media Link-IP Family CD into the CD/DVD Rom drive.
(The CD should auto run but if it does not go to the CD/DVD Rom drive and select the
“autorun.html”file.)
2.) Click on the IP Power Section Bar

- 14 -
3.) Select the IP Power 9258W2
4.) All the available downloads for the 9258W2 will be shown

- 15 -
5.) Download the required software –IPEdit.exe - by clicking on the download button.
Then you can select to connect 9258W2 by LAN or by WAN ( WPS)
Connection by WiFi- WPS ( WiFi Protection Service )
IP Power 9258W2 support WPS function which can assist user setup the WiFi connection of
user`s router and IP Power 9258W2 automatically . Before using WPS function, please check
your WiFi router and see if there has WPS function first . There should have a button name
“WPS / QCC “ or a sign on the router for user to click easily.
Please refer following steps to setup WiFi –WPS connection
Step 1: Power on the 9258W2 - only connect power in but do not connect the LAN cable , you
will hear one short beep in 40 seconds means 9258W2 boot successfully
Step 2: Press the “WPS button”of your WiFi Router. ( Please check your router WPS function )

- 16 -
Step 3 : Press One time ( short) the “Reset button”of 9258W2 and then there is one long beep
which means the WPS function of 9258W2 enable .
Step 4: After few seconds , there are 2 short beep Which means WPS connection
successfully ( If WPS connection fail , there is one long beep mean the connection fail.
Please go back to step 2 and try again )
WPS Quick procedure :
One short press “ reset “ button on 9258W2 One Short beep 5-10 seconds short
2 beeps WPS connection successful
Step 5 : Execute IPEDIT.exe . There is WiFi IP address of 9258W2 shown in IPEDIT.exe as
following :

- 17 -
If can not see the IP in the area of Local Devices of IPEDIT.exe. Please disable the
Firewall and Anti Virus software temporally .
Step 7 : Double click the IP address and your PC will execute web browser like IE ,Firefox or
Google Chrome and there is wizard pop up to enquire the Username and Password .
Username : admin Password : 12345678
Step 8 : For the WiFi connection by WPS way , user can check here :
Network WiFi Info Profile list
To make this WiFi IP Address can be found on Internet, please arrange 2 settings as log in the
9258W2 webpage:
1st : Please go to “Network Setting Default gateway Setting “and change as WiFi for the
Default gateway Setting .
2nd : Please do the port mapping / port forwarding in your router ( Need to check the router
manual ).

- 18 -
Connection first by LAN –Network cable then setup for WiFi connection
Without WPS , user can use LAN network cable to connect 9258W2 first .
Please refer following steps to setup LAN connection
Step 1: Connect the LAN cable to 9258W2 .The LAN cable should be connected to a Router /
HUB + Router.
Step: 2 : Connect power cable to 9258W2 and Power on the 9258W2 .There is one short beep in
45 seconds after 9258W2 power up .The short beep means 9258W2 boot up successfully
Step 3 : After hear the one short beep , please execute IPEDIT.exe . There is IP address of
9258W2 showed in the right side of IPEDIT.exe following :
If can not see the IP in the area of Local Devices of IPEDIT.exe. Please disable the
Firewall and Anti Virus software temporally .
Step 4 : Double click the IP address and user PC will execute web browser like IE ,Firefox or
Google Chrome and there is wizard pop up which inquire username and password .
Username : admin
Password : 12345678

- 19 -
LAN connect by IP Search software “ IPEDIT “
IP Edit is a search tool designed to search, configure, or access the IP Power 9258W2 from a
local networked computer.
IP Power 9258W2 Default Login / Password
Default IP: 192.168.1.168 (When no DHCP is apparently)
Default Login: admin
Default Password: 12345678
1.) In the local devices section user will see user device show up if connected correctly.
If can not see the IP in the area of Local Devices of IPEDIT.exe. Please disable the
Firewall and Anti Virus software temporally .
2.) Select the 9258W2 device and the device information will pop up on the right.
3.) Check to see that the gateway IP and the IP Address (9258W2) match user current network.
If not, type in the correct information, then hit the submit button to save changes.

- 20 -
For example:
If user have the following information regarding the 9258W2 and user network
User PC Network :
Computer IP Address: 192.168.1.122
Gateway: 192.168.1.1
Sub Net mask: 255.255.255.0
Port: 80
User 9258W2 in IPEDIT :
9258W2 IP Address: 192.168.100.34
Gateway: 192.168.100.1
Sub Net mask: 255.255.0.0
Port: 80
Since the IP Address of the 9258W2 is : 192.168.100.34
User will need to make sure that the first 3 segments of user 9258W2 IP Address
must match the first 3 segments of user gateway IP.
First 3 Segment of Gateway Address: 192.168.1.X
So user new IP Address for the 9258W2 should be: 192.168.1.XXX
New Network Information
9258W2 IP Address: 192.168.1.26
Gateway Address: 192.168.1.1
Local Computer IP Address: 192.168.1.122
Sub Net mask: 255.255.255.0
Port: 80
4.) Press the rescan button to see if changes have been made.
5.) Double click on the device in the local device section and an IE web browser
with the device login will pop up.
6.) Type in the default Login and IP Address to enter the device.
Default Login : admin
Default : 12345678
Notice :
* User can click " REF " in IEPDIT to auto search proper IP setting for 9258W2.
It will take few minutes to show the suggest wizard.