IP Power 9820 User manual

- 1 -
IP Power 9820
User Manual
Firmware Version: 1.0B
Date Released: SEP. 2014

- 2 -
Warning: Any changes made to this equipment without permission may cause damages to the device!
IMPORTANT NOTICE
1. IP Power 9820 was designed for indoor use, we carry no responsibility for possible damages
caused by outdoor use, especially in the rain.
2. Please use the power adapter provided by the dealer, we carry no responsibility for the
possible damage from using power adapters not provided by us .
4. Do not shake the IP Power 9820 in any fashion
5. Please contact the dealer If IP Power 9820 is not working properly.
Copyright © 2014 All rights reserved. No part of this publication may be reproduced, stored in a
retrieval system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording or otherwise, without the prior written consent of us.
All trademarks and products mentioned in this document are the properties of us.

- 3 -
Table of Content
WELCOME...........................................................................................................5
Introduction .................................................................................................................................................. 5
PRODUCT OVERVIEW........................................................................................6
Features......................................................................................................................................................... 6
Specification.................................................................................................................................................. 7
Minimum System Requirements................................................................................................................. 7
Package Contents ......................................................................................................................................... 8
INTERFACE DESCRIPTION................................................................................9
Front View..................................................................................................................................................... 9
Rear View.....................................................................................................................................................11
From Left side to Right side ....................................................................................................................11
SETTING UP USER DEVICE.............................................................................12
Before we Start ............................................................................................................................................12
Hardware Connection.................................................................................................................................12
Software Installation ...................................................................................................................................12
Installing Software....................................................................................................................................13
Connection by WiFi- WPS ( WiFi Protection Service ) ...........................................................................14
Connection first by LAN –Network cable then setup for WiFi connection..............................................16
Internet Setup............................................................................................................................................22
Using IP Server.........................................................................................................................................22
WEB INTERFACE..............................................................................................24
Connect to user Device...............................................................................................................................24
Device name .............................................................................................................................................26
Display or Hide the left setting section :...................................................................................................26
Information :.............................................................................................................................................27
IO Control :...............................................................................................................................................28
Network :..................................................................................................................................................49
Application Settings..................................................................................................................................59
System Setting..........................................................................................................................................72

- 4 -
OTHER WAY TO CONTROL .............................................................................81
By IR Remote Controller............................................................................................................................81
CGI HTTP Commands...............................................................................................................................82
Telnet Control..............................................................................................................................................84
FAQ :..................................................................................................................85

- 5 -
Welcome
Introduction
IP Power 9820 is a new generation of the Power Distribution Unit (PDU) & Remote Power
Control (RPC) system. Its able to connect to the WiFi network plus WPSfunction for easy & fast
to set up a device to user wireless home/office network and control in the network
With embedded web server and HTTPS protection , 9820 supports higher grade security as
working on Internet. User can control power easily and more safely through the web browser on
Windows PC or on Smartphone like Internet Explorer (IE) , Firefox , Google
Chrome , Safari ( iOS ) and Android system.
9820 allows user to remote control power up to 8 separate devices on/off via network . With
higher power current design , the total maximum current of IP Power 9820 is up to 20AMP /
110V or 15 Amp / 220V (Power Inlet as C20 ). As support SSL & SNMP, user can use public
email like Gmail / Hotmail / Yahoo mail to get the email as the ON/OFF status change . User can
also control by e-mail without doing port forwarding / port mapping and search the other IP
Device in webpage directly .
Besides control through web browser, there is Android Apps name “IP Power “ for Android
user to control the outlet power turn ON / OFF, get the meter reading of Current / Voltage /
Temperature and quick search device in LAN / WAN Android phone / touch panel . User can
also use the IR remote controller which comes with 9820 to control outlet on & off directly
by the handheld remote controller without need PC operation , specially benefit in no networking .
no PC system environment or emergency use for quick response in second. Not only control
manually, 9820 supports Auto Ping , Time Scheduler which is more suitable for factory / office
/ home automation . 9820 can auto control one outlet as DI get status change ( Dry contact )
Besides power control , through 9820 , user can also check the power usage WH ( watt per
hour ) , current consumption of each port , voltage and external Temperature value , LOG
information & send LOG to assign IP(Syslog) , get consumed history & LIVE Line
Chart in webpage. There are LCD display and one 12V 1A power out ( un- controllable ).
IP Power 9820 also can connect USB Camera to view the area near 9820. For smart phone
customer , 9820 has QR code of different network to log in fast and easy. Use can directly
search the other IP Device in webpage directly .
New function : Apply Own Langrage display in webpage & save the data of current ,
voltage and temperature into USB dun Drive
For system integrator, there are several popular developing tolls like TelNet , SNMP and HTTP
Command ( SDK) for 2nd development . The various applications of the 9820 includes:
Power Management, Server Management, Internet Controllable Timer,
System Integration, Remote Power Control in Remote locations ………….. etc.
User Friendly . Convenience & Powerful ,

- 6 -
Product Overview
Features
1) 8 ports 1U 19” Rack mount remote Power Controller : Wireless & Wired control.
2) Web Server built-in design, directly control by web browser –PC & Smart phone :Internet
Explore (IE) , Firefox , Google Chrome, Safari - iPhone and Android browser of smart
phone. ( Windows , Android & iOS) .
3) Android Apps “IP Power “ – free of charge
-Controls the outlet power ON/OFF
-Read the meter of Current / Voltage / Temperature
-Quick search in LAN / WAN ( liek IPEDIT & IP Serice )
4) Support WiFi 802.11n-b/g ,plus WPS for easy WiFi setup .
( WPA-PSK, WPA2-PSK, AES,128-bit WEP,64-bit WEP,TKIP, WPA2,WPA )
5) Support HTTPS /SSL, TCP/IP , PPPOE, DHCP, DDNS, SNMP & SMTP & Telnet
6) Support HIGH Power usage inquire :
-Adopt high grade Component & Relay for better quality / performance / durability
-+ Maximum current per outlet : 10 Amp
+ Maximum current total 8 outlets: 20Amp / 110V or
15 Amp / 220V ( Power Inlet as C20 )
+ Maximum watt for light control : 240 Watt ( such as T5 fluorescent light )
7) Detect the consumed of Current , Voltage & external Temperature
- Voltage Range : 90~240VAC
- Current Range : 0~ 20 Amp
- Temperature :0 ~ 60℃/ 32 ~ 140℉.
And Alarm as over setting by beeper & send e-mail
8) Live chart display the value of WH ( watt per hour) , Current Amp , Voltage & Temperature.
9) Support " Inrush Current " for T5 fluorescent light for energy savings
10) Power Surge protection & FUSE embedded in
11) Support Log function & send to assign IP address (Syslog)
12) Save History as CSV file for application .
13) Support 2 pcs USB for Camera & Flash Drive.
-USB Webcam ( W/ UPNP , M-JPG /YUV) to view the environment.
-USB Flash Drive for saving current & temperature data & remote read the
contents
14) Convenience design for Smartphone :
-Webpage : easy to Control ON/OFF& get meter value
-Android APP “ IP
-QR Code : create QR code of the 9820 IP address
15) Time Schedule - can pre-set a suitable time to turn power on / off automatically .

- 7 -
16) Support handheld IR Remote controller to control without PC
17) Support Auto Ping for auto control management.
18) Back Up function for quick setup for multiple devices like Time Schedule, Network Setting
19) E-mail control function & E-mail alarm :
-Receive Email with Current , Voltage & Temperature info. as device boot up.
-Email alarm as over setting at Current , Voltage and temperature or as DI status change
-POP3 Control : Control each outlet ON/OFF through E-mail
Support public e-mail -- @gmail.com , @yahoo.com , @hotmail.com ..........etc.
20) LCD Display : Show the value of Temperature , Voltage, IP address, Current per each port
21) Supply one DI –Dry contact. and can auto control one outlet to turn ON/OFF as DI status
changed
22) Supply one 12V 1A DC power output ( over 1A will stop supply power but with )
23) Embedded IP Manager to search other IP device in local network in webpage directly.
24) Specific software developed by Aviosys and provided free of charge :
-SDK available : HTTP Command
-IP Power Center - for control multiple Aviosys IP devices in same software
-CNT software ( Cross Network Technology )- allows user eliminate set up work on any
Router without port forwarding , simply Plug & Play .
-Arrange own langrage display
Specification
Power input : 100V - 240V ( C20 Inlet )
Maximum loading of each output: 10 amp
Maximum of Total loading : 20Amp / 110V or
15 Amp / 220V
Dimensions: 450 x 170 x 45 mm ( L x W x H )
Weight: 1.60g
Minimum System Requirements
PC with web browser & network capacity.
Web Browser : IE 9.0 or above , Firefox, Google Chrome , Safari
RJ45 LAN & Internet HUB & Switch
JAVA version 1.60 or above to check USB Webcam under web browser Internet Explorer -IE
Internet ( for remote access) or Ethernet Network ( Internal Network use) with some type of
Internet connection, (i.e. ADSL, Cable, Dial up or any other forms of Internet service)

- 8 -
Package Contents
1. 9820
Unit x 1
2. IR
Remote
Power
Control
3. 9820
Installation
CD
4. WiFi
Antenna
X 1 pcs
5. Input
Power
Cable
(option)
The power inlet SPE is C20 . Please double check the power cable compatible
for 10/15/20 amp current loading ( depends on user device power consumed ) .
Power cable outlook example : Europe Style

- 9 -
Interface Description
Front View
From Left side to right side
Wifi Connection :
Connect with the WiFi Antenna in package .
Network & USB :
Network Connection :
For 10/100 Mbps network .
There are 2 network RJ45 connect :
NET1 - Orange is for network connection
NET2 –Gray is for by pass as hub function only
Please connect NET1 to the Router/ Hub / IP Switch.
USB Connection :
For USB Camera / USB Flash Drive .
There are 2 USB 2.0 connectors :
One is for USB Camera connection for USB Web
Camera with UPNP & video format as M-JPG / YUV.
Another one is for USB Flash Drive saving current
& temperature sensor data as CSV files
Please do not connect more than 1pc. USB Camera to
9820.
WiFi -Signal light
WiFi Signal light in flash Green . The Indicator shows
the WiFi signal transfer status. The light will be keep
flash as WiFi connected .
MCU - light
For internal developing purpose. Green light is always
ON
Number 1 to 8 - Outlet status
To indictor the power ON /OFF status of each outlet
Light in Green : power ON

- 10 -
Light in RED : power OFF
Reset :
To There are two functions for this button.
* Enable WPS function by one short click
There is one long beep as enable WPS function. Please
refer page #16 for details.
* Set back to default setting by long press
To reset to original manufacture settings, hold down the
reset button with a sharpen pin for
5- 6 seconds then release. There are THREE beeps
response ( short –- mid long –short ) which means
reset successfully and 9820 will be rebooted itself ( one
beep after reboot ) and most information go back to
default setting .
Temp :
This is Temperature Sensor ( RED) to detect the
temperature around of 9820 .
The detect range is 0 ~ 60℃/ 32 ~ 140℉.
IR :
This area is for receiving the signal from handheld IR
remote controller which comes in shipping package.
DI :
Dry Contact
Power Light :
Device power .
DC 12V Out
Supply DC 12V 1A power.
LCD Display :
Show the IP address , Temperature, Voltage and
current of each port .