iPuray BRT-611 User manual

Product Description of BRT-611 Page 1of 5
Shenzhen Asia Bright Industry co., Ltd., Building 10, Asia Industrial Park, Gangtou, Bantian, Shenzhen, China.
www.a-brt.com. [email protected].
© 2015 All rights reserved. Subject to change without notices.
Glass Touch Button Timer Switch with
Remote Control
(No Neutral Required)
Model #：BRT-611
Features:
BRT-611 is a glass touch button timer switch which is controlled by a micro controller unit. In
addition to a wall mount touch button unit, it also has a handheld IR remote control. It is designed
for easy installation and retrofit, directly fit into standard wall box with no need for the neutral.
Control over up to 4 loads: one motor and three lamps. Each load can have a delay-off time
of 30 seconds or instant on/off;
Easy to use. Four touch buttons to turn on or turn off the load, and one touch operation to turn
off all the loads;
Good for all kinds of loads (resistive, inductive, or capacitive);
ABS-V0 flame resistance material; and
Classical 86 series design and high quality build.
Front View and Back View:
Fig. 1 and Fig. 2 show the front view and the back view of BRT-611 glass touch button timer
switch with remote control respectively.
Fig. 1 Front View Fig. 2 Back View

Product Description of BRT-611 Page 2of 5
Shenzhen Asia Bright Industry co., Ltd., Building 10, Asia Industrial Park, Gangtou, Bantian, Shenzhen, China.
www.a-brt.com. [email protected].
© 2015 All rights reserved. Subject to change without notices.
As shown in Fig. 1 and Fig. 2, BRT-611 glass touch button timer switch set includes a wall mount
unit and an IR remote control. The wall mount unit has 4 control touch buttons and an LED power
indicator, and wiring terminal blocks on the back. The remote control has five control buttons and
a wall mount bracket.
Specification Parameters:
Input Voltage
180～250V(50Hz/60Hz)
Operation
Environment
No-condensation 20-90% RH，
-20℃～55℃
Motor Wattage
150W
Lamp Wattage
1000W/Load*
Remote Control
Mode
IR
Remote Control
Distance
7m
Wall Mount
Unit Dimension
86mm x 86mm x 43mm
Wall Mount
Unit Weight
84g
Remote Control
Dimension
107mm x 36mm x 14mm
Remote Control
Weight
31g
Mounting Hole
Spacing
60mm
Matching
Box
75mm x 75mm x 50mm
* One of the lamp loads needs to be resistive, or an additional adaptor is needed for capacitive
loads.
Wiring Diagram and Installation Guide:
BRT-611 glass touch button timer switch only require hot wire for installation:
Hot wire (ACL): Coming from the power line with 220V; and
Load wires: Going to the loads.
Fig. 3 BRT-611 Wiring Diagram
Warning: Please make sure power is turned off before starting installation!

Product Description of BRT-611 Page 3of 5
Shenzhen Asia Bright Industry co., Ltd., Building 10, Asia Industrial Park, Gangtou, Bantian, Shenzhen, China.
www.a-brt.com. [email protected].
© 2015 All rights reserved. Subject to change without notices.
Fig. 3 shows the wiring diagram and Fig. 4 shows the step-by-step installation instructions. There
are three easy steps:
Step one: Use a screwdriver to pry off the front plate in position A;
Step two: Wiring according to the diagram and the labelled ports of the switch; and
Step three: Install the switch to the wall box using screws and put back the front plate.
Fig. 4 BRT-611 Installation Guide
BRT-611 Operation Guide:
BRT-611 glass touch button timer switch can be controlled either using the touch buttons of the
wall mount unit or the remote control as shown in Fig 5. After BRT-611 is powered on, the LED
on the front panel will be on and the unit is ready to control the loads.
Fig. 5 Two Ways to Control

Product Description of BRT-611 Page 4of 5
Shenzhen Asia Bright Industry co., Ltd., Building 10, Asia Industrial Park, Gangtou, Bantian, Shenzhen, China.
www.a-brt.com. [email protected].
© 2015 All rights reserved. Subject to change without notices.
Control using wall mount unit: There are 4 touch buttons on the front panel. Pressing each
touch button will turn on or turn off the fan or the lamp.
#1: Pressing once will turn on the fan, and pressing again will turn off the fan;
#2: Pressing once will turn on lamp 1, and pressing again will turn off lamp 1;
#3: Pressing once will turn on lamp 2, and pressing again will turn off lamp 2; and
#4: Pressing once will turn on lamp 3, and pressing again will turn off lamp 3.
Also, pressing a touch button to turn on a load will cause the touch button to flash briefly.
One touch button operation to turn off all the loads in the same time: Pressing and holding touch
button #1 for 2 seconds will turn off all the loads in the same time.
Control using remote: There are 5 buttons on the remote. Pressing each button will turn on or
turn off the fan, or turn on or turn off the lamp.
FAN: Pressing once will turn on the fan, and pressing again will turn off the fan;
LAMP 1: Pressing once will turn on lamp 1, and pressing again will turn off lamp 1;
LAMP 2: Pressing once will turn on lamp 2, and pressing again will turn off lamp 2;
LAMP 3: Pressing once will turn on lamp 3, and pressing again will turn off lamp 3; and
OFF: Pressing this button will turn of all the loads in the same time.
Set up delay-off function: Use a screwdriver to pry off the back cover to access the dip
switches as shown in Fig. 6. Switching a dip switch to on will set up the corresponding load for
delay-off operation respectively.
Fig. 6 Dip Switches for Activating Delay-off Time
Dip switch 1 = Lamp 1 Dip switch 2 = Lamp 2
Dip switch 3 = Lamp 3 Dip switch 4 = Fan

Product Description of BRT-611 Page 5of 5
Shenzhen Asia Bright Industry co., Ltd., Building 10, Asia Industrial Park, Gangtou, Bantian, Shenzhen, China.
www.a-brt.com. [email protected].
© 2015 All rights reserved. Subject to change without notices.
The delay-off time is set at 30 seconds at factory. Please talk to our sales representative if other
customized settings are required.
Activate delay-off function: Once the delay-off function is set up, touching the button once will
turn on the load, and touching the button the second time will trigger delay-off for the load. The
button will blink until the load is automatically turned off after 30 seconds.
During the delay-off time countdown, touching the keypad will turn off the load immediately.
Applications:
BRT-611 glass touch button timer switch can be used for automatically turning on and/or turning
off various loads such as fans, lights, appliances, or other kinds of electrical equipment. They are
perfect for saving energy and bringing convenience and safety to our daily life and work. The
remote control set is especially handy.
They have wide applications at various locations such as homes, hotels, schools, laboratories,
hospitals, offices, etc.
How to Order:
Please contact us: Shenzhen Asia Bright Industry Co., Ltd
Building 10, Asia Industrial Park, Gangtou, Bantian, Shenzhen, China
Tel: [phone] [phone]
Fax: [phone] [phone]
Email: [e-mail] Website: www.a-brt.com