iPuray BRT-701 User manual

Product Descriptions of BRT-701 Page 1of 4
Shenzhen Asia Bright Industry co., Ltd., Building 10, Asia Industrial Park, Gangtou, Bantian, Shenzhen, China.
www.a-brt.com. [email protected].
© 2015 All rights reserved. Subject to change without notices.
Keypad Speed Control Switch
(No Neutral Required)
Model #：BRT-701
Features:
BRT-701 is a speed control switch which has a built-in micro controller unit. It uses one button for
turning on or turning off the motor, and for adjusting the motor’s speed. BRT-701 is designed for
easy installation and retrofit, directly fit into standard wall box with no need for the neutral.
5 speed settings;
Memory function. The motor always stars at last speed;
Minimum speed setting. The minimum speed can be fine-tuned by the user to suit for all kind
of motors;
LED lights showing fan speed;
ABS-V0 flame resistance material; and
Classical 86 series design and high quality build.
Front View and Back View:
Fig. 1 and Fig. 2 show the front view and the back view of BRT-701 speed control switch
respectively.
Fig. 1 Front View Fig. 2 Back View

Product Descriptions of BRT-701 Page 2of 4
Shenzhen Asia Bright Industry co., Ltd., Building 10, Asia Industrial Park, Gangtou, Bantian, Shenzhen, China.
www.a-brt.com. [email protected].
© 2015 All rights reserved. Subject to change without notices.
As shown in Fig. 1 and Fig. 2, BRT-701 speed control switch has one keypad and 5 LED
indicators on the front, and wiring terminal blocks on the back. Each LED indicates the current fan
speed, respectively.
Specification Parameters:
Input Voltage
220～240V(50Hz/60Hz)
Operation
Environment
No-condensation 20-90% RH，
-20℃～40℃
Wattage
150W
Load type
Motor
Mounting Hole
Spacing
60mm
Matching
Box
75mm x 75mm x 50mm
Dimension
86mm x 86mm x 43mm
Weight
89g
Wiring Diagram and Installation Guide:
BRT-701 speed control switch only require two wires for installation:
Hot wire (ACL): Coming from the power line with 220V; and
Load wire: Going to the load.
Fig. 3 BRT-701 Wiring Diagram
Warning: Please make sure power is turned off before starting installation!
Fig. 3 shows the wiring diagram and Fig. 4 shows the step-by-step installation instructions. There
are three easy steps:
Step one: Use a screwdriver to pry off the front plate in position A;
Step two: Wiring according to the diagram and the labelled ports of the switch; and
Step three: Install screws and front plate.

Product Descriptions of BRT-701 Page 3of 4
Shenzhen Asia Bright Industry co., Ltd., Building 10, Asia Industrial Park, Gangtou, Bantian, Shenzhen, China.
www.a-brt.com. [email protected].
© 2015 All rights reserved. Subject to change without notices.
Fig. 4 BRT-701 Installation Guide
Operation Guide:
BRT-701 speed control switch has 5 different speed settings, and the speed is adjusted by pressing
the keypad on the front.
Turn on or turn off: Pressing the keypad will turn on the motor at its last speed (the first time
turn-on will be at the highest speed), and pressing again will turn off the motor.
Adjust the speed: Pressing and holding down the keypad will cycle the motor speed in 5
different settings, from the highest to the lowest, then back to the highest. Once the desired speed
is reached, release the keypad.
Adjust the minimum speed: Remove the front plate to have access to a potentiometer as shown
in Fig. 5. Use a screw driver to adjust this potentiometer to yield different minimum speed.
Fig. 5 Adjust the Minimum Speed

Product Descriptions of BRT-701 Page 4of 4
Shenzhen Asia Bright Industry co., Ltd., Building 10, Asia Industrial Park, Gangtou, Bantian, Shenzhen, China.
www.a-brt.com. [email protected].
© 2015 All rights reserved. Subject to change without notices.
Rotating the potentiometer clockwise will reduce motor speed and rotating the potentiometer
counter-clockwise will increase motor speed.
Note: Adjusting the minimum speed is necessary for some motors, or the motor may not move
due to too low a driving voltage.
Applications:
BRT-701 speed control switch is ideal for regulating all kinds of motors. It has wide applications
at various locations such as homes, schools, laboratories, hospitals, bar, restaurant, etc, to control
the speed of ventilation fans, pumps, or blowers.
How to Order:
Please contact us: Shenzhen Asia Bright Industry Co., Ltd
Building 10, Asia Industrial Park, Gangtou, Bantian, Shenzhen, China
Tel: [phone] [phone]
Fax: [phone] [phone]
Email: [e-mail] Website: www.a-brt.com