IQ Power Tools iQPC912VSK User manual

iQPC912VSK
Paverskate Installation Guide

www.iqpowertools.com
888-274-7744 | Fax [phone]
iQ Power Tools
P0 Box 7449, Moreno Valley, CA 92552
iQPC912VSK Paverskate Installation Guide
iQPC912VSK - PAVERSKATE INSTALL
Remove the blade screw.
Install the inner air
restrictor.
1.
3.
Remove the outer thrust
washer, blade spacer and
inner thrust washer.
2.
iQPC912VSK
Toolkit Bag
Ball-End Hex Driver, 5/64, 5mm
Loop Hex T-Handle 6”, 3mm
Allen Wrench 5mm
Allen Wrench 4mm
Flat Head Screwdriver 1/8”
Multi-Tool, Sparkplug, 4mm

iQPC912VSK Paverskate Installation Guide
www.iqpowertools.com
888-274-7744 | Fax [phone]
iQ Power Tools
P0 Box 7449, Moreno Valley, CA 92552
Install the outer air
restrictor.
4.
Install the blade.6.
Install the inner thrust
washer and blade spacer.
5.
Install the outer thrust
washer.
7.

www.iqpowertools.com
888-274-7744 | Fax [phone]
iQ Power Tools
P0 Box 7449, Moreno Valley, CA 92552
iQPC912VSK Paverskate Installation Guide
Install the blade screw
Insert the paverskate
attachment until it is
seated.
8.
10
Tighten the blade screw.9.
Push up the
and tighten.
11.

iQPC912VSK Paverskate Installation Guide
www.iqpowertools.com
888-274-7744 | Fax [phone]
iQ Power Tools
P0 Box 7449, Moreno Valley, CA 92552
Paverskate is installed. To remove, reverse procedure.12.
Please reference the iQPC912VSK Operator’s manual for
additional information about the iQPC912VSK
For customer service, please call 888-274-7744.
NOTES