IR Robot Marubot Football League 2 Players User manual

www.irrobot.com
Marubot Football League (2 players)
Instruction Manual
(Score Bar Version)
Important
▶Please read the manual carefully before using this machine.
▶Keep this manual for your reference at anytime.
★Specifications including design and color are subjected to
change without notice.

www.irrobot.com 1
Table of Contents
Table of Contents
5. Cleaning 32
6. Trouble Shooting
6.1 Power out . 33
6.2 The Robot is not moving . 34
6.3 The ball does not come out. 35
7. New Robot Replacement 36
8. Parts Replacement
8.1 Robot 39
8.1.1 Power Supplying Pins 39
8.1.2 Tires 40
8.1.3 Magnetic Ball Holder 41
8.2 Machine 42
8.2.1 Lights 42
8.2.2 LEDs 43
8.2.3 Control Parts (Joystick, Turbo Button, Steering, and Start Button) 43
9. Parts List
9.1 Machine 44
9.2 Robot 46
9.3 Block Diagram 47
10. Customer Service 48
Precautions for use 2
1. Introduction
1.1 Product Information 7
1.2 Components 8
1.3 Product Specifications 9
1.3.1 Machine 9
1.3.2 Robot 14
2. Installation Instructions
2.1 General Instructions 17
2.2 Installations 17
2.3 Handling the robot 22
2.4 How to set the robot speed 23
3. How to play? 24
4. Game Setting
4.1 Control Panel 26
4.2 Sound Volume 26
4.3 Service Coin 26
4.4 Blow button 26
4.5 Mode, set, and enter button 27
4.5.1 Coin Setting 28
4.5.2 Time Setting 28
4.5.3 Credit Reset 28
4.5.4 Attracting Sound Time Setting 29
4.5.5 Ticket Dispenser Setting 30
4.6 Coin Selector 31

www.irrobot.com 2
WARNING
Indicates a situation where disregarding the suggestions could result in death or serious injury.
☞PRECAUTIONS FOR USE
The following safety precautions are given throughout this manual. They must be strictly followed to protect those
who install, use or maintain this product as well as to prevent other people’s injuries and property damages.
People's injuries and property damages.
• The following suggestions show the degree of danger and damage caused
CAUTION
Indicates a situation where disregarding the suggestions could result in injury or product damage.
• The following graphic suggestions describe the types of precautions to be followed.
Indicates a matter of which care should be
taken. Indicates a matter which is forbidden.
Indicates a matter which should be performed without fail.
• The following graphic suggestions describe the types of precautions to be followed.
In this instruction manual, some procedures require a qualified in-shop maintenance person or industry
specialist. For such instructions, a qualified person must take care of the jobs.
• Otherwise an electric shock, machine trouble, or a serious accident may result.
• Replacing the machine parts, inspecting and maintaining the machines, and troubleshooting must be assigned
only to a qualified in-shop maintenance person or industry specialist. This booklet gives instructions
that hazardous jobs in particular must be handled by an industry specialist. Qualified in-shop maintenance
person and industry specialist are defined as follows.
Qualified in-shop maintenance person
• A qualified in-shop maintenance person must have experience in maintaining amusement machines.
Under the supervision of an amusement machines shop owner or manager, he or she routinely
assembles, installs, inspects and maintains the amusement machines, or replaces their component
units and consumable parts, in the amusement machines workshop and/or location.
Jobs handled by qualified in-shop maintenance person
• Assembling, installing, inspecting and maintaining amusement machines and replacing their
component units and consumable parts.
Industry specialist
• An industry specialist must be engaged in designing, manufacturing, inspecting and servicing
amusement machines. Or he or she must have an education in electrical, electronic and mechanical
engineering, and routinely maintain and repair amusement machines.
Jobs handled by industry specialist
• Assembling and installing amusement machines and repairing and adjusting their electrical,
electronic and mechanical component parts.
Be sure to read the following

www.irrobot.com 3
Setting Up
Be sure to consult your nearest dealer when setting up, moving or transporting this product.
• This product should not be set up, moved or transported by any one other than an industry specialist.
Doing so could result in injury or product damage.
• When installing this product, set the 4 leg levelers evenly on the floor and make sure that the product
is installed stably in a horizontal position. Unstable installation may result in injury or accident.
• When installing this product, use caution not to apply undue force to opening and closing parts and
other movable parts. Otherwise, injury and accident may result, or the product may be damaged.
This product is an indoor game machine. Never set the game machine up outside.
• Setting this product up outside could result in accidents or equipment damages.
Do not set the game machine up near emergency exits.
• Doing so could block exits in time of emergency and could result in death or serious injury.
Do not set the game machine up.
1. In a place exposed to rain or moisture.
2. In a place exposed to direct sunlight.
3. In a place exposed to direct heat from air-conditioning and heating equipment, etc..
4. Near hazardous flammable substance such as thinner and kerosene .
• Otherwise an accident or malfunction may result.
Do not place containers holding chemicals or water on or near the game machine.
• Electrical shock or damage could be caused by water or foreign matter entering the inside of the machine.
Do not place objects near the ventilating holes.
• Doing so could cause the internal temperature to rise excessively, resulting in fire or equipment failure.
Do not bend the power cord by force or place heavy objects on it.
• Doing so could result in electrical shock or fire.
Never plug or unplug the power cord with wet hands .
• Doing so could result in electrical shock or fire.
Never unplug the game machine by pulling the power cord.
• Doing so could damage the cord, resulting in electrical shock or fire.
WARNING
Be sure to use indoor wiring for within the specified voltage range.
For extension cord, use indoor wiring of the specified rating or more.
• Failure to do so could result in fire or equipment failure.
Be sure to use the attached power cord.
• Otherwise a fire or machine trouble may result.
Never plug more than one cord at a time in the electrical receptacle.
• Doing so could result in fire or electrical shock.
Do not lay the power cord where people walk through. You may trip on or stumble over the cord.
• You may stumble down and get injured, or damage the power cord.
Be sure to ground this product.
• Otherwise an electrical shock or machine trouble may be caused.
Do not apply a strong force for moving the machine.
• Otherwise, it may result in an accident or breakage of the units.
Clearance of 100 mm (3.94in) or more should be created between the game machine and walls.
• Otherwise the machine (s) cannot be ventilated well, resulting in malfunction.
Do not change the DIP switch setting of this product to other than factory setting.
• Otherwise, the game can not be played properly.
CAUTION

www.irrobot.com 4
Operating
If there is any abnormality such as smoke, bad smell or abnormal noise being
emitted from the machine, immediately turn OFF the main power switch and
unplug the power cord from the receptacle to stop operating it.
• Using the machine in abnormal conditions could result in fire or accidents.
Do not leave the power cord plugged in improperly or covered with dust.
• Doing so could result in electrical shock or fire,so inspect the power cord periodically.
WARNING
1. Turn OFF the main power switch.
2. Unplug the power cord from the receptacle.
3 . Contact your nearest dealer.
In case of abnormality
Do not use this product anywhere other than industrial areas.
• Using in a residential area or an area next to a residential area could affect signal
reception of radios, television sets, telephones, etc..
Do not give impact to the glass cover.
• Otherwise, it may result in an unexpected accident or injury.
Do not plug or unplug the power cord with wet hands.
• Doing so could result in electrical shock.
In handling the power cord, follow the instructions below.
• Otherwise, fire or electrical shock may result.
If the power cord or power plug becomes damaged, stop using the machine immediately
and ask your nearest dealer to replace the parts.
• Using a damaged power cord or power plug could result in fire or electrical shock.
CAUTION
• Do not damage the power cord.
• Do not bend the power cord excessively.
• Do not heat the power cord.
• Do not bind the power cord.
• Do not sandwich the power cord.
• Do not modify the power cord.
• Do not twist the power cord.
• Do not pull the power cord.
• Do not stand on the power cord.
• Do not drive a nail into the power cord.
• Please do not play this game if
1. you have been drinking.
2. you are tired or sick or have been recently sick.
3. you think you might be pregnant.
4. you have a pace maker.
5. you have previously experienced muscle spasms or loss of consciousness by
watching a TV screen.
• This game is designed for one player only. Do not play with 2 or more people.
• When playing, please be aware of your surroundings.

www.irrobot.com 5
Inspection and cleaning
Be sure to turn OFF the main power switch and unplug the power cord from the
receptacle before inspecting or cleaning the machine.
• Failure to do so could result in electrical shock.
When replacing parts, be sure to use parts of the correct specifications.
Never use parts other than the specified ones.
• Using improper parts could result in fire or equipment failure.
There is high voltage inside the machine.
Only qualified industry specialist is allowed to open the machine's back door.
With the back door open, be very careful not to touch the monitor and its nearby parts.
• Otherwise an accident or electric shock may result.
If the sub power switch of the service panel is turned OFF without turning
OFF the main power switch of the power supply unit, some parts in the units
remain live. When opening the back door, be sure to turn OFF the main power switch
and unplug the power cord from the receptacle.
• Otherwise, there may be danger an accident or electric shock.
Strictly refrain from disassembly and repair of parts which are not indicated in this
manual, as well as settings and remodeling.
• Otherwise, a fire, malfunction or trouble may result. In case of any trouble, ask your nearest
dealer for repairs and other services. IR ROBOT will not resume any responsibility for the damage
to the product attributable to disassembly and repair of parts which are not indicated in this manual,
as well as settings and remodeling.
To clean the game machine, wipe it with a soft cloth dampened in a neutral detergent.
• Using thinner of other organic solvent or alcohol may decompose the material.
• Electrical shock or equipment failure could be caused by water entering the inside of the machine.
WARNING
Moving and transportation
The game machine contains parts such as electronic components and precision
components which are sensitive to vibrations and impacts. Great care therefore
should be taken when moving and transporting the game machine.
Be sure not to let the machine tip over.
Before moving the machine, be sure to turn OFF the main power switch, unplug the
power cord form the receptacle and remove the power cord form the machine.
• Stepping on or tripping over the power cord may result in an accident or damage to
the machine.
Before moving the machine, be sure to fully lift the four levelers and move it on the casters.
• Otherwise, an accident, breakage or trouble may result.
Do not apply a strong force for moving the machine.
• Otherwise, it may result in an accident or breakage of the units.
CAUTION
• When setting up, inspecting, maintaining, moving or transporting this product, follow the procedures
and instructions set forth in this manual and perform such work safely.
• Do not set up, handle, inspect, maintain, move or transport this product under conditions equivalent
to the condition of "WARNING" or "CAUTION" specified in this manual.
• If a new owner is to have this product as a result of transfer, etc., be sure to give this manual to the
new owner.
PRECAUTIONS IN HANDLING

www.irrobot.com 6
1. Introduction
Welcome!
Thank you for purchasing our Marubot Football League game machine. It is
brand-new model of the robot game machines that we have developed this
category since 2003. The basic techniques under patent pending are stable
power supplying method without any power cable or battery and Zigbee
wireless communication control system. Our techniques make it possible to
operate the robot without any additional countermeasure to play the game once
it is launched.
Please read this manual carefully before operating the machine to avoid any
trouble from wrong use. Thank you and enjoy with our robots.
• Product design and specifications may be changed without notice in order to enhance
product performances.

www.irrobot.com 7
1.1 Product Information
■Name of Game : Marubot Football League (2 Players)
■Main Features :
●Game for one or two players
●No additional battery charging or changing and continuous playing game possible
●Joysticks and specially equipped steering make easy robot controlling
●Very stable wireless communication system applied : Zigbee
●Easy new robot replacing function
●Adding dribble function with magnetic holder and unique designed ball
●Adjusting robot speed possible
●Turbo function added for instant fast moving
●Automatic ball supplying function
●Stopper built-in for fixing the machine position
●4 wheels help easy movement to new location
■Specifications :
1) Machine (1 Unit)
- Dimension : 1500 * 965 * 1790 (W x D x H)mm
- Weight : 192 kg
- Main Power : AC 220/230V, 50/60Hz (110V : Optional)
- Working Electricity : DC 12V/DC 5V and AC
2) Robot (2 ea)
- Dimension : 135 * 99 * 116 (W x D x H)mm
- Weight : 0.6 Kg
- Power : supplied from the playground directly
- Automatic charging system ( Working Electricity : DC 12V )
* Only on standby status will charging battery of the robot.
3) Communication System
- Type : Zigbee Type
- Frequency Range : 2,400~2,483.5MHz
- Transceiver : Single-chip 2.4GHz RF Transceiver
* The each module of the machine do not transmit at the same time and same frequency.

www.irrobot.com 8
< Game Machine >
“Stadium” < Robots >
Red : 1, White : 1
< 2 Balls >
1.2 Components
< Hexagon socket
screw key, 2.5mm : 1 >
<Key : 2 sets>
(1 for glass cover , 1 for Main Body)
<Manual>
< Hand Cleaner : 1>
<AC Power Cable : 1>
* One set of spare parts (for robot) included
< Power supplying Pin
Total 12 ea (2 robots, each 6 pins) >
< Snap Ring for Wheel>
<2 Tires> <Magnetic Ball Holder>
<screws>
< Score Bar : 1>

www.irrobot.com 9
1.3 Product Specifications
1.3.1 Machine • Size : 1500 * 965 * 1790 mm (W x D x H)
• Weight : 192kg
• Power : AC 110/220~230V, 50~60 Hz

www.irrobot.com 10
1.3.1.1 Parts Name of the Machine
Wireless Robot
Coin
Selector
9
10
Robot
Control
part 2
1
11
Score FND
Coin
Collect box
8
Wheel / Stoper
7
Start button
6
Credit
Display
5
Time
Display
4
Speaker
3
Turbo button
2
Robot
Control
part 1
1
Glass Cover
12
LED lamp
14
Ball Outlet
15
16
SCORE
BAR

www.irrobot.com 11
1) Function of Parts
No. Name Functions
①Control Part 1, 2 Joystick, Turbo button, and Steering included.
Controls the robot
②Turbo Button Increasing robot speed momentarily
③Speaker Speaker
④Time Display Displays game time
⑤Credit Display Displays remaining credits
⑥Start Button Game start button
⑦Wheel/Stopper 4 Wheels for movement and 4 stoppers for positioning
⑧Coin Collect Box Collects coins
⑨Wireless Robot Two robots
⑩Coin Selector Coin inserting hole
⑪Score FND Shows goal scores
⑫Glass Cover Glass cover of upper case
⑬Playground Controls robots on this playground. Mainly power supplying
from this board to the robots.
⑭LED lamp Each LED lamp is located individually at 4 corner
⑮Ball Outlet The ball comes out to the ground through this outlet.
Score Bar Shows goal scores
16

www.irrobot.com 12
8
7
SMPS
4
Blow Up
Pipe
Control panel Multi-outlet socket
Air Blower
9
Main
Board
6
10
Coin Box
Assy
Speaker
1
Score FND
2
LED Board
3
User Board
5
1.3.1.2 Inner Parts Name of the Machine

www.irrobot.com 13
1) Function of Inner Parts
No. Name Functions
①Main Board Controls all parts of the machine
②Score FND Shows goal scores
③LED Board 4 LED boards in each corner illuminate the playground.
④Air Blower Discharges the ball to the playground with air
⑤User Board Controls joystick, turbo button, steering, start button, and
time/credit display
⑥SMPS Converts AC to DC
⑦Control Panel Controls all setting for playing games, coin/credit etc.
⑧Multi-outlet Socket Use for outlets need AC power directly
⑨Coin Box Ass’y Coin selector and coin collect box positioned
⑩Speaker Speaker

www.irrobot.com 14
1.3.2 Parts Name of the Robot
[MARUBOT(game robot)]
Head cover
Body part
Front
wheel
Ball guide
Magnetic
Ball Holder
Tire
Power
Supplying
Pins
Direction
Control
Tap
Program
Download
Port
Rear
Wheels
Speed
Control
Switches
Front
Wheels
Metal
Balls
Power
On/Off
Switch
LED Light
6
5
4
15
14
13
12
11 10
9
8
7
3
2
1
• Size : 135 * 99 * 116 mm (W x D x H)
• Weight : 0.6kg
• Power : DC 12V

www.irrobot.com 15
1) Function of Parts
No. Name Functions
①Head Cover Head cover. Protects inside electric board
②Body Part Robot body
③Ball Guide Guides the ball as human feet
④Magnetic Ball
Holder Holds the ball to be able to dribble with a magnetic
⑤Front Wheel Front wheel
⑥Tire Rubber tire
⑦LED Light Identifies other robot with different color of the LED light
⑧Power Supplying
Pins Main power for the robots flows in through these pins from the power supplying board.
⑨Program
Download Port If there is any damage on the program, it can be downloaded with this port.
⑩Power On/Off
Switch Power On/Off Switch
⑪Metal Balls Two metal balls help smooth movement of the robot.
⑫Front Wheels Front Wheels
⑬Speed Control
Switches Robot speed control switch (Refer to P.21)
⑭Direction Control
Tap Controls straightness of the robot in movement
⑮Rear Wheels Rear Wheels

www.irrobot.com 16
Right wheel
Robot
Main
Board
Motor Ass’y
Robot Body Left wheel
Bottom
Cover
12
3
8
9
10
4
5
6
7
11
12
< Snap Ring for
Wheel>
Rechargeable
Battery
Magnetic
Ball Holder
Ball Guide
Screws
Robot
Power
Board
1.3.2.1 Inner Parts Name of the Robot

www.irrobot.com 17
2.1 General Instructions
2. Installation Instructions
1) Consider to avoid the place such as humid, dusty or any possibility to damage the machine
during transportation or storing the machine, otherwise it can be major reason to damage the
machine.
2) Do not disassemble, repair, or remodeling the machine except authorized expert.
3) Avoid direct sunlight or placing the machine beside heating appliances.
4) Do not put wet hands or articles on the power supplying board during the power in “On”.
5) Before cleaning the machine, the power should be “Off”. Do not put the water or chemical
cleanser inside of the machine and just clean up with dried and soft cloth. Get rid of any wetness.
6) Make sure to remove any dust and materials especially metallic articles on the power supplying
board,
otherwise it is caused to short the power or create possible burning.
2.2 Installations
▪Installation or dismantling should be made by authorized expert. Contact your local dealer if
you have any trouble on installation.
▪Avoid any shock during transportation or installation.
▪Keep the machine horizontally and hold it with stopper under the machine.
▪The Zigbee signal might be jammed up, if you install more than 2 machines
in the same area.(within20m)
1) Location
- Find stable and flat place and avoid wet place.
- Avoid direct sunlight, heat, and the place changes humidity and temperature dramatically.
2) Set up
- All machines must use proper power outlet.
- Please check total amperage when you use an extension line.
- Fix the machine with stoppers under the machine.

www.irrobot.com
3) Score Bar Installation
Please check whether below components of score bar are on the playfield.
< Score Bar display assay with cable : 1 > < Score Bar post with connection cable : 1 >
< Screw-1 : 4ea >
M4 x 10 < Screw-2 : 2ea > M4.2 x 13
- Turn off the main power switch.
- Connect the cable inside of score bar display assay to the cable in the post.
- Assemble the score bar display assay and score bar post by using screw 1.
Connect cables.

www.irrobot.com
-Connect the score bar cable (from main board) and score bar post connection cable.
Connect cables.
-Assemble the side panel and score bar post by using Screw-1 and attach the score bar post to
the side body of the machine by using Screw-2.
< Screw-1 : 4ea>
M4 x 10
< Screw-2 : 4ea>
M4.2 x 13
-Assemble state