iRobot Braava Jet m6 User manual

Owner’s Guide
Robot Mop

Braava jet®m6 Owner’s Guide 1
EN
Bottom View
Top View
Precision Jet Spray
Nozzle
Easy-Carrying
Handle
SPOT Clean Button
RCON Sensor
Rear Docking
Sensor
HOME Button
Lid Latch
Accessing the Tank
Home Base Charging Station
CLEAN Button
Pad Ejection
Button
Camera
Tank
Tank Cap
Lid
Opening
Lid Latch
Folding
Tank
Handle
Cord
Storage
IR Sensor
Window
Charging
Contacts
Removable
Drip Tray
Cli Sensors
Pad Tracks
Pad Reader
Cleaning Pad
Wheels
Cli
Sensors
Charging
Contacts
About Your Braava jet®m6 Robot Mop
Check the Safety Guide to ensure safe operation of your Braava jet®m6

2 For more information, visit global.irobot.com
EN
1.5 ft/0.5 m
1.5 ft/0.5 m
4 ft/1.5 m
Getting started
1 2
Get ready Position the charging station
and plug in
To start, you’ll need your robot, charging
station, the drip tray and power cable. Choose an area near an outlet with good
Wi-Fi coverage.
Plug the power cable into the charging
station, and then into the wall.
WARNING: To prevent the risk of
your robot falling down stairs,
ensure that the charging station is
placed at least 4 feet (1.2 metres)
away from stairs.

Braava jet®m6 Owner’s Guide 3
EN
3 4 5
Attach the drip tray Wake up your robot Connect and update
Place the drip tray onto the front of the
charging station.
Slide your robot onto the charging
station contacts to activate the battery.
The light ring will light up after a few
minutes and a sound will let you know
it’s awake.
Connect your robot to the iRobot Home
App to allow remote control, cleaning
customisation and to keep your robot’s
software up to date.

EN
6Attach a cleaning pad
Cleaning Pad Types
Slide a wet mopping or dry sweeping pad
onto the underside of the robot.
Detach an existing cleaning pad by pressing
the button on the front of the robot.
Single-Use Wet Mopping Pad
Single-Use Dry Sweeping Pad
Washable Wet Mopping Pad (Microfibre)
Washable Dry Sweeping Pad (Microfibre)
WET MOPPING PADS
DRY SWEEPING PADS

Braava jet®m6 Owner’s Guide 5
EN
6 capfuls
per tank
Retail: Full size
(Sold separately)
Sample size
(Included in box)
1/2 bottle
per tank
6 capfuls
per tank
Retail: Full size
(Sold separately)
Sample size
(Included in box)
1/2 bottle
per tank
2  oz
59 mL 13  oz
385 mL
7Fill the tank
Cleaning Solution
Remove the tank from the robot. Add iRobot® Hard Floor Cleaning Solution (if using). Fill to the top with water.
When wet mopping, you may add iRobot®
Hard Floor Cleaning Solution to the tank
before adding water. This product is a
concentrate that is suitable for all well-sealed
hard floors.
Important: iRobot® Hard Floor Cleaning
Solution is the only solution that can be
safely used in your robot mop. Please
do not use other cleaning solutions.

6 For more information, visit global.irobot.com
EN
Cleaning
Use your robot frequently to maintain well-conditioned floors.
• Your robot will automatically explore and clean your home, moving in a
methodical manner across the floor, with some overlap from one pass to
the next to ensure that every spot on the floor is cleaned three times. If you
are looking for a quicker clean or a deeper clean than this default setting,
or if you want to adjust the amount of water sprayed, you can change your
cleaning preferences from the iRobot Home App.
• Your robot will return to the charging station at the end of a cleaning job,
whenever it needs to recharge or when the tank needs to be refilled.
Note: If the ‘CLEAN’ text is pulsing while charging, your robot is in the
middle of a cleaning job and will automatically resume where it left off
once recharged.
• To send the robot back to its charging station, tap (home). A blue light ring
pattern will indicate that the robot is seeking the charging station. This feature
will only work if your robot started the job from the charging station.
• When the robot senses that its tank needs to be filled, the light ring indicator
will illuminate in a red sweeping motion towards the lid latch.
• Clean smaller designated areas (3.3 ft2/1 m2) by placing your robot at the
bottom centre of the space you’d like to focus on. Tap (spot clean) to
start cleaning.
Tips for Optimising Performance
• Your robot works best when used with the iRobot Home app.
• For optimal mopping performance, we recommend that you vacuum first to
pick up large dirt and debris before running Braava jet®.
• Your robot will only run with Braava jet® m Series pads, which are made
specifically for Braava jet® m Series robots.
• Use a new pad for each cleaning job, and do not pre-wet the pads prior to use.
• Keep your charging station plugged in and the area around it clear of clutter.
• You can use a Dual Mode Virtual Wall® Barrier to help keep your robot in
places that you want to be cleaned, and out of the ones you don’t. (Sold
separately)
• Within the iRobot Home App, you can adjust cleaning preferences to modify
cleaning power, speed and coverage.
Just Press CLEAN
Tap to Start/Pause/Resume
Hold for 3 seconds to end a job
and put the robot to sleep
Hold for 10 seconds to reboot
Using Your Braava jet® m6 Robot Mop

Braava jet®m6 Owner’s Guide 7
EN
Charging
• Slide your robot onto the charging station contacts to activate the battery.
Note:Your robot comes with a partial charge, but we recommend that
you charge the robot for 3 hours prior to starting the first cleaning job.
• The light ring indicator will show the current charging status. This will turn off
after 1 minute to save power, but can be shown again if you press CLEAN. This
can also been seen in the iRobot Home App.
• Your robot uses a small amount of power whenever it is on the charging
station. You can put the robot in a further-reduced power state when not in
use. For instructions and more details on this Reduced Power Standby Mode,
refer to the iRobot Home App.
• For long-term storage, turn off your robot by removing it from the charging
station and holding down (home) for 10 seconds. Store your robot in a
cool, dry place.
Lithium Ion Battery
For the best results, only use the iRobot Lithium Ion Battery that comes with your
Braava jet® m6.
WARNING: Lithium ion batteries and products that contain lithium ion
batteries are subject to stringent transportation regulations. If you need to
send this product (with the battery included) for service, travel or any other
reason, you MUST follow these delivery instructions.
• The battery MUST be turned off before shipping.
• Turn off the battery by removing the robot from the charging station and
holding down (home) for 10 seconds. All indicators will turn off.
• Package the product in its original packaging.
• Ship via ground transportation only (no air shipping).
• If you need further assistance, contact our Customer Care team.
Light Ring While Charging
Solid: fully charged
Pulsing: charging
Low battery. Please charge.
Red Light
Ring
Troubleshooting
• Your robot will tell you
something is wrong by playing
an audio alert and turning the
light ring indicator red. Press
CLEAN for details. Further
support and instructional videos
are available in the iRobot
Home App.
• After 90 minutes of inactivity
off the charging station, your
robot will automatically end its
cleaning job.

8 For more information, visit global.irobot.com
EN
Care and Maintenance
Cleaning the Sensors and Pad
Reader
Cleaning the Body of the RobotCleaning the Wheels
Clean the sensors on the bottom of your robot
with a damp cloth.
Wipe clean with a damp cloth.
Pull off any visible debris or hair that gathers
around the wheels.
Important: Do not spray cleaning solution
or water onto the sensors or sensor
openings.

Braava jet®m6 Owner’s Guide 9
EN
Cleaning the Tank Cleaning the Drip Tray Caring for Washable Cleaning
Pads
If you notice an odour from the tank
11
22
33
4
4
5
Remove the tank from your robot mop.
Remove the robot from the charging
station.
Note: You can clean your washable pads
in two ways: either by hand washing or in a
washing machine.
Fill the tank with warm water.
Do not use boiling water.
Separate the drip tray by lifting it up
from the charging station.
Thoroughly wash the
pad with warm water.
Wash using the warm
cycle, then air dry.
Do not put in the dryer.
Do not wash with
delicates.
Close the cap and lightly shake the tank.
Clean the drip tray with a damp cloth
or with warm water in the sink.
Rinse the tank and repeat as necessary.
Dry thoroughly before reattaching the
drip tray to the charging station.
Put your robot mop back onto the
charging station.
Hand Washing
Machine Washing

10 For more information, visit global.irobot.com
EN
Regulatory Information
Regulatory Model: RMA-Y1
The iRobot Corporation hereby declares that this radio equipment
device is in compliance with the EU Radio Equipment Directive
2014/53/EU and the RoHS Directive 2011/65/EU. The full text of the
EU Declaration of Conformity is available at the following internet
address: www.irobot.com/compliance.
The iRobot Corporation hereby declares that this radio
equipment device is in compliance with the Radio Equipment
Regulations 2017 and The Restriction of the Use of Certain
Hazardous Substances in Electrical and Electronic Equipment
Regulations 2012. The full text of the UKCA Declaration of
Conformity is available at the following internet address: www.
irobot.com/compliance.
This device incorporates the Harpoon radio module model
AXE-Y1. Harpoon is a dual-band radio which operates in the
WLAN 2.4 GHz and WLAN 5 GHz bands.
The 2.4 GHz band is limited to operate between 2400MHz and
2483 MHz with a maximum EIRP outputpower of 17.56 dBm (57
mW) at 2472 MHz.
The 5 GHz band is limited to operate between 5150 MHz and
5725 MHz with a maximum EIRP output power of 18.23 dBm
(66.52 mW) at 5700 MHz.
Instructions for Disposal of Waste Electrical & Electronic
Equipment:
This symbol on the product indicates that the appliance must
not be disposed of with unsorted common municipal waste. As
the end-user, it is your responsibility to dispose of the end-of-
life appliance in an environmentally sensitive manner as follows:
(1) returning it to the distributor/dealer from whom you
purchased the product; or
(2) depositing it in a designated collection point.
Disposing of this product correctly will help save valuable
resources and prevent any potential negative eects on
human health and the environment, which could otherwise
arise from inappropriate waste handling. Please contact your
local authority for further details or your nearest designated
collection point. Penalties may be applicable for incorrect
disposal of this waste, in accordance with your national
legislation. More information may be found at the following
source: http://ec.europa.eu/environment/waste/weee/index_
en.htm

Braava jet®m6 Owner’s Guide 11
EN
USA & Canada
If you have questions or comments about your dirt disposal, please contact
iRobot before contacting a retailer.
You can start by visiting global.irobot.com for support tips, frequently asked
questions, and information about accessories. This information can also be
found in the iRobot Home App. If you need further assistance, call the US
Customer Care team at [phone].
iRobot USA Customer Care Hours
Monday to Friday, 9AM — 9PM Eastern Time
Saturday and Sunday 9AM — 6PM Eastern Time
Outside USA & Canada
Visit global.irobot.com to:
Learn more about iRobot in your country
Get hints and tips to improve your product performance
Get answers to questions
Contact your local support center
iRobot Customer Care

12 For more information, visit global.irobot.com
EN
©2022 iRobot Corporation, 8 Crosby Drive, Bedford, MA 01730 USA. All rights reserved.
iRobot, Braava jet, and Virtual Wall are registered trademarks of iRobot Corporation, in the
UnitedStates and other countries. App Store is a trademark of Apple, Inc., registered in the U.S.
andother countries. Google Play is a trademark of Google, Inc. Wi-Fi and the Wi-Fi logo are
registered trademarks of Wi-Fi Alliance.
WC#: 4817710 vA