
Table of Contents
IrriGreen EcoZone Components and ConServerTM package 3
Contractor Supplied Parts 4
System Requirements 40-80 psi and 10 gpm 5
Throw Distances Map distances from 5’ to 35’ 6
System Design One head per zone, no overlap 7-8
Installation
Installation Drawing 9
Genius heads are pre-numbered by Zone Heads run in numerical order 10
Genius head and pipe installation Flush water and air from piping 11
Genius head plumbing connection Use FlexPipe 12
Genius head depth Slightly above grade 13
Wiring
Wiring Schematic 14
Wi-Fi connection and Range App connects to IrriGreen Wi-Fi network 15
Controller and Server communication Connect to each other via radio 16
Controller and Server power 24VAC 17
EcoZone Plug n Play Cables w/ CableLok Waterproof cables simplify installation 18-19
Valve Box Installation Always protect connections with valve boxes 20
Mater Valve and Pump Wiring IrriGreen recommends master valves 21
Standard Valve Wiring Run Drip and spray zones 22
Flow sensor wiring and installation Red to Sensor 1 or 2, set in app, respectively 23-24
Rain and/or soil moisture sensor (SMS) Right side server terminals, add jumper wire 25
Troubleshooting
Streams irregular / short distance Tighten cap, check filter alignment 26
Error Messages 27-28
2