ISC Edge Roller User manual
1
ER100 Edge Roller: Issue A March 2021
1 2
+
Edge Roller
2ER100 Edge Roller: Issue A March 2021
The ISC Edge Roller is ideal for protecting ropes from wear. Each Edge Roller box has base rollers
and side rollers, to protect the rope from edge wear and lateral movement
Edge Roller boxes are sold separately and boxes can be added or removed to suit terrain of each
application.
EDGE ROLLER
3
ER100 Edge Roller: Issue A March 2021
AEdge Roller Nomenclature
Max
30°
BCare & Maintenance
4ER100 Edge Roller: Issue A March 2021
CMarkings
ER100 EDGE ROLLER
Rope Ø 8 - 16mm
ER006970
D Assembly
E Rope Installation
5
ER100 Edge Roller: Issue A March 2021
FUse & Misuse
<250kg (551lb)
EN 1891
8 - 16mm
(5/16 - 5/8”)
GInspection
Use Misuse
6ER100 Edge Roller: Issue A March 2021
A Nomenclature
1Single Roller Box
2Link Attachment Point
3Roller Sleeve
4Link
5Link Barrel
B Care & Maintenance
C Markings
1
2Part Code
3Suitable Rope Diameter - (8 - 16mm / 5/16 - 5/8”)
4Serial Number
5Product Logo
D Assembly
1Connect the Link through the Link Attachment Point. Using the same link, connect to the second
Roller Box and tighten the barrel.
2Repeat this and use as many Roller Boxes and Links as required.
E Rope Installation
1 Attach to the anchor point and place rope (8 - 16mm / 5/16 - 5/8”) through the link boxes.
2 Anchor the Edge Roller Assembly.
F Use & Misuse
Use
Ensure the Edge Rollers are positioned accordingly before beginning any work. Beware, the
greater the distance between the Edge Rollers and the anchor point, the greater the potential for
lateral movement of the rope.
The Edge Rollers must be positioned so that the rope runs over the centre and does not lift out.
Ensure the Edge Roller is secure and stable before using the rope below it.
During use, it is essential to regularly check that the rope and Edge Rollers are still correctly
positioned.
The Edge Rollers are designed for use in a work positioning system, to protect a rope from contact
with an edge where it is not possible to achieve a free hang. Ideally the rope should be rigged to
avoid all contact with edges.
Edge Rollers may be used with rope conforming to EN 1891, of diameter 8 - 16mm (5/16 - 5/8”).
Misuse
Do not allow the rope to rub on the working edge. This may cause the rope to become damaged.
Ropes in contact with each other must not be allowed to move relative to each other or the Edge
Rollers. If necessary, use more than one Edge Roller.
It is not designed for use with wire cable. It should not be used if the anticipated load on the rope
exceeds 250kg (551lb).
G Inspection
Edge Rollers should be subject to:
- Pre-use checks
- Thorough inspections
- Interim inspections (as appropriate)
English
7
ER100 Edge Roller: Issue A March 2021
Before each use, check the metal part of the Edge Roller for damage, especially worn grooves or
burrs. Small burrs may be removed with emery cloth.
Check condition of the Links. Ensure that the barrel loosens and tightens accordingly.
Ensure that all rope contact surfaces are left smooth. Check the rope for signs of wear or damage
and replace if necessary.
All checks should be undertaken in good light. Any item showing any defect should be withdrawn
from service immediately.
Quality Assurance
Materials
The body of the Edge Roller is Steel.
The rollers are Aluminium.
The Quick Links are Steel
8ER100 Edge Roller: Issue A March 2021
1
23
4
6
8 9 10 11
5
7
12
PRODUCT RECORD
9
ER100 Edge Roller: Issue A March 2021
Year of manufacture, Rok výroby, Produktionsår, Herstellungsjahr, Año de
Purchased from, Zakoupeno od, Købt af, Gekauft von, Comprado en (distribuidor),
Date d’achat, Data di acquisto, Aankoopdatum, Kjøpsdato, Data zakupu, Data da
Name of Manufacturer, Výrobce, Producent, Hersteller, Fabricante, Valmistaja,
utilisation, Data del primo utilizzo, Datum van ingebruikname, Dato for første gangs
Inspection date, Datum kontroly, Inspektionsdato, Prüfungsdatum, Fecha de
Prüfung (E) oder Reparatur(R)), Motivo (examinación periódica (E) o reparación(R)), Syy
(R)), Motivo (esame periodico (E) o riparazione (R)), Reden (periodiek onderzoek (E)
Signature, Podpis, Underskrift, Unterschrift, Firma, Allekirjoitus, Signature, Firma,
1
2
3
4
5
6
7
8
9
10
11
12
10 ER100 Edge Roller: Issue A March 2021
NOTES
11
ER100 Edge Roller: Issue A March 2021
NOTES
12 ER100 Edge Roller: Issue A March 2021
International Safety Components Ltd.
Unit 1, Plot 2
Llandygai Industrial Estate
Bangor
Gwynedd
LL57 4YH
United Kingdom
+44 (0) 1248 363 125
www.iscwales.com
Scan the QR Code with your Smartphone to register for ISC e-mail Alerts. We will
email you from time to time with news of new products, product updates and other
news features which are relevant to your chosen industry.
Stay up to date with ISC e-mail alerts!
Edge Roller
This manual suits for next models
1
Table of contents
Popular Protection Device manuals by other brands
Segen Solar
Segen Solar ACDB-250A-800A-3-1-1 installation manual
TrustOne Global
TrustOne Global TSG-550 Operation & installation manual
HOGERT
HOGERT EDGAR II Instructions for use
PSP
PSP ZAP BLAST KNUCKLES quick start guide
nvent
nvent LANRJ45C6P instruction sheet
Kaya Safety
Kaya Safety Rock R-5 A user guide
