Isenberg Ecomatic 100.6410 User manual

MadeForResponsibleLuxury
NOTICETOHOMEOWNER
• We recommendthatthisproductisinstalledbyaqualified 
professionalplumber.
•Pleasecheckthisproductimmediatelytoensurethatithas
notbeendamagedandiscomplete.Beforeinstallation,please
makesurethisproductisthecorrectmodelandyouhaveall
thepartsrequiredforinstallationanduse.
•Pleaseflushthewatersystemtoensurethatnometalswarf,
solder,andotherimpuritiescanentertheproduct.
•
Turnoffwatersupplybeforecommencingwork. 
•Pleasereadtheseinstructionscarefullyandretainforfuture
reference.
BEFOREYOUBEGIN

•Youmustobservealllocalplumbinglawsandcodes.

•Donotinstallthisvalveifitdoesnotmeetlocalplumbingcodes.
•Shutoffthemainwatersupply.

www.isenbergfaucets.com
Ver. 2.53
InstallationManualForBodyJets
100.6410/160.6410/196.6410

InstallationManualForBodyJets
100.6410/160.6410/196.6410
MadeForResponsibleLuxury
TABLEOFCONTENTS 
• OperatingSpecifications . . . . . . . 1
Cut-OutDimensions/RoughInSpec . . . . . 2
InstallationInstructions . . . . . . . 3

•
•
www.isenbergfaucets.com

WATERTEMPERATURE
OPERATINGSPECIFICATIONS
MadeForResponsibleLuxury


WATERPRESSURE

Thisproductistobeusedwithawater
pressurerangeof15PSIto72PSIONLY

Ifwaterpressureisgreaterthan72PSI
installapressurereducingvalve(PRV)


Thisproductistobeusedwithwaterat
atemperaturerangeof40˚F-120˚F
ONLY!

1www.isenbergfaucets.com

CUTOUTDIMENSIONS
MadeForResponsibleLuxury
2www.isenbergfaucets.com
The6410seriesbodyjetshaveavalvecasing.Thecut-out
dimensionsforthispurposecanbeseenbelow
ROUGHINSPEC
The6410seriesbodyjetshavearoughinspecwhich
canbeseenbelowforeasyinstallation.
MIN - 2.32” / 59mm
MAX - 3.11” / 79mm
MIN
MAX
0.39” / 10mm
4.37” / 111mm
4.37” / 111mm

INSTALLATIONINSTRUCTIONS
MadeForResponsibleLuxury
3www.isenbergfaucets.com
The body jet will require a 1/2” NPT - Female connection in the wall. Install at appropriate depth as
per rough in specications. Ensure valve is level when screwed into the wall. Insert and tighten
1/2” male connection.
Secure valve casing to with appropri-
ate screws provided.
Insert and tighten 1/2” stop.

INSTALLATIONINSTRUCTIONS
MadeForResponsibleLuxury
4www.isenbergfaucets.com
Install protective plastic cover.
Max - Min
Install tile and cut extra plastic to ensure that valve casing is ush with tile.

INSTALLATIONINSTRUCTIONS
MadeForResponsibleLuxury
5www.isenbergfaucets.com
Install Brass extension piece.
Install body jet cartridge using
provided screws.
Ensure the cartridge is installed in
the correct orientation - look for the
“TOP” symbol.

INSTALLATIONINSTRUCTIONS
MadeForResponsibleLuxury
6www.isenbergfaucets.com
Install trim plate.
The trim face plate can be removed
using a screw driver as shown on the
left diagram.