Copyright @iStartek 2018 All Rights Reserved
3. Save electricity positioning (an hour): equipment in one hour time interval to update location
information, the power-saving mode use battery slowly. This one is good for power saving.
5.2 Call function
Please set admin number (monitoring number) before the following operations
（1）Setup whitelist :Click APP setting—whitelist—setting phone numbers（Maximum 5 contact numbers
can be set, only the phone numbers in whitelist can call this tracker）.
（2）SOS emergency call
If you have set up the family number (SOS number, maximum two), Long press SOS button, light up
then release, the GPS tracker will dial the family number when long press power/ SOS button, If the first
number answers, it will not dial the second number. If the first family number does not answer, it will dial
the second number automatically, the GPS tracker will stop dialing after circularly dial twice.
Note: After ordering the caller ID function, it admin number or white list or any of the family numbers are
set, the tracker will refuse calling from the stranger automatically. Whitelist and family number can be set
in completed phone number or short number. When there is SOS call from GPS tracker, if the first family
mobile phone number answers the call by leaving voice message, the tracker will not dial the next family
number.
5.3 Historical route query
This product will keep 3 months of route information. If two GPS positioning points are very close to each
other in the historical route data, the redundant one will be deleted automatically.
5.4 Geo-fence
APP Geo fence—click upper- right “+”—Move circular area on map( android phone can set circle radius by
upper “ +” and “-”, IOS can set Geo fence by moving upper icon)—Mark Geo fence name( such as family or
school)—Save.(suggesting the Minimum radius 500m)
If the watch is out from fences, mobile phone APP client-side will receive the alarm information from GPS
locator platform. Alarm information frequency is related to the positioning interval time setting, the shorter
positioning time interval, the more frequent to detect if out of Geo-fence or not.
5.5 Voice monitoring
APP settings—voice monitoring—fill in the monitor mobile phone number—click ok(wait for a while and then
the equipment will dial your mobile phone number; you can listen to the voice around locator after pick up your
mobile phone).
