iStorage datAshur Pro2 User manual

www.istorage-uk.com | [email protected] | [phone]
The datAshur PRO2is supplied in the ‘Initial Shipment State’ with no pre-set
Admin PIN. A 7-15 digit Admin PIN must be created before the drive can be
used as set out below under ‘First Time Use’.
The datAshur PRO2may need to be charged before use for
30-60 minutes by inserting into a powered USB port. Möglicherweise muss der datAshur PRO2vor der Verwendung
30 bis 60 Minuten lang aufgeladen werden; schließen Sie es dazu an
ein USB-Anschluss an.
First Time Use
1. Press and hold down the SHIFT ( )
button for one second.
RED and GREEN LEDS will become
solid.
2. Press and hold down both
KEY ( ) +1 buttons.
LEDs turn to blinking GREEN and
solid BLUE.
3. Enter your New (7-15 digit)
Admin PIN and press the KEY
() button once.
LEDs remain blinking GREEN and
solid BLUE.
4. Re-enter your New Admin PIN
and press the KEY ( ) button again.
GREEN LED will blink indicating
Admin PIN has been successfully
confi gured and drive unlocked.
Note:Once datAshur PRO2has been successfully unlocked, the GREEN LED will remain
blinking for 30 seconds only, during which time the datAshur PRO2needs to be connected
to a powered USB port.
To lock the datAshur PRO2, save all data and safely eject the drive.
Unlocking with the Admin PIN
1. Press and hold down the SHIFT
() button for one second.
The RED LED will become solid.
2. In Standby State (solid RED LED)
press the KEY ( ) button once.
GREEN and BLUE LEDs blink
together.
3. Enter your Admin PIN and press
the KEY ( ) button again.
GREEN LED will blink indicating
the drive has been successfully
unlocked as Admin.
The datAshur PRO2can now be
confi gured (refer to the user manual
pre-loaded on your drive), or connect to
a powered USB port to access the drive
contents.
To unlock the datAshur PRO2with the Admin
PIN, follow the simple steps as set out below.
Der datAshur PRO2wird im Ursprünglichen Versandstatus ohne voreingestellte Admin
PIN geliefert. Eine sieben- bis fünfzehnstellige Admin PIN muss erstellt werden, bevor
das Laufwerk wie unter „Erstmalige Verwendung“ beschrieben verwendet werden kann.
Erstmalige Verwendung
1. Halten Sie die Taste SHIFT () für
eine Sekunde gedrückt.
Die ROTE und GRÜNE LED leuchten
dauerhaft.
2. Halten Sie die Tasten KEY () und
1 gedrückt.
Die LEDs wechseln zu blinkend
GRÜN und Festes BLAU.
3. Geben Sie Ihre neue (sieben- bis
fünfzehnstellige) Admin PIN ein
und drücken Sie einmal auf die
Taste KEY ( ).
Die LEDs sind weiterhin GRÜN
(blinkend) und BLAU (Fest).
4. Geben Sie Ihre neue Admin PIN
erneut ein und drücken Sie die
Taste KEY ( ) erneut.
Die GRÜNE LED blinkt und zeigt
ein, dass die Admin PIN erfolgreich
konfi guriert und das Laufwerk
entsperrt wurde.
Entsperren mit die Admin PIN
1. Halten Sie die Taste SHIFT ( ) für
eine Sekunde gedrückt.
Die ROTE LED leuchten dauerhaft.
2. Drücken Sie im Standby-Modus
(dauerhafte leuchtende ROTE LED)
die Taste KEY ( ) einmal.
Die GRÜNE und BLAU LED blinken
gemeinsam.
3. Geben Sie Ihre Admin PIN ein und
drücken Sie die Taste KEY ( )
erneut.
Die GRÜNE LED blinkt und zeigt an,
dass das Laufwerk erfolgreich als
Admin entsperrt wurde.
Der datAshur PRO2kann jetzt
konfi guriert werden (sehen sie auf
das Laufwerk das gespeicherte Be-
nutzerhandbuch) oder zum Zugriff auf
das Laufwerk Schließen sie es an einen
stromführenden USB-Anschluss an.
Um den datAshur PRO2mit die Admin PIN zu
entsperren, folgen Sie diese Schritte.
Hinweis: Sobald der datAshur PRO2erfolgreich entsperrt wurde, blinkt die GRÜNE LED nur
für 30 Sekunden. Während dieser Zeit muss der datAshur PRO2über einen stromführenden
USB-Anschluss angeschlossen sein.
Um den datAshur PRO2zu sperren, speichern Sie alle Daten und entfernen Sie das
Laufwerk sicher aus.
Votre périphérique peut nécessiter d’être chargé pendant 30 à 60
minutes avant utilisation, en l’insérant dans un port USB alimenté.
La datAshur PRO2est fourni dans l’état « Livraison initiale » sans aucun code PIN ad-
ministrateur prédéfi ni. Il faut créer un code PIN administrateur de 7 à 15 chiff res avant
de pouvoir utiliser la clé, comme décrit ci-dessous dans « Première utilisation ».
Remarque : Une fois que la datAshur PRO2a bien été déverrouillée, la LED VERTE clignotera
pendant 30 secondes seulement, au cours desquelles la datAshur PRO2doit être connectée à
un port USB alimenté.
Pour verrouiller la clé datAshur PRO2, enregistrez toutes les données et éjectez-la de façon
sécurisée.
1. Appuyez sur le bouton
SHIFT ( ) et maintenez-le enfoncé
pendant une seconde.
La LED ROUGE s’allume en continu.
2. En état de veille (LED ROUGE
allumée en continu), appuyez une
fois sur le bouton KEY ( ).
Les LED VERTE et BLEUE clignotent
simultanément.
3. Saisissez votre code PIN
administrateur et appuyez à
nouveau sur le bouton KEY ().
La LED VERTE clignotera indiquant
que la clé a bien été déverrouillée
en tant qu’Administrateur.
La datAshur PRO2peut maintenant être
confi gurée (consultez le manuel
d’utilisation pré-chargé sur la clé) ou
connectez la clé à un port USB alimenté
pour accéder à son contenu.
Pour déverrouiller la clé datAshur PRO2à l’aide
du code PIN administrateur, suivez les étapes
simples détaillées ci-dessous.
Potrebbe essere necessario caricare il dispositivo prima dell’uso
per 30-60 minuti inserendolo in una porta USB alimentata.
Il datAshur PRO
2
viene fornita nello “stato di spedizione iniziale” senza alcun PIN
amministratore preimpostato. È necessario creare un PIN amministratore di 7-15 cifre
prima di poter utilizzare l’unità come indicato di seguito in “Primo utilizzo”.
Primo utilizzo
1. Tenere premuto il pulsante
MAIUSC ()per un secondo.
I LED ROSSO e VERDE si
accenderanno con luce fi ssa.
2. Tenere premuti entrambi i pulsanti
CHIAVE ( )+1.
I LEDs diventano VERDE
lampeggiante e BLU solido.
3. Inserire il Nuovo PIN ammini-
stratore (7-15 cifre) e premere il
pulsante CHIAVE ( ) una volta.
I LEDs restano VERDE
lampeggiante e BLU solido.
4. Reinserire il Nuovo PIN ammi-
nistratore e premere di nuovo il
pulsante CHIAVE ( ).
Il LED VERDE lampeggerà a indica-
re che il PIN amministratore è stato
confi gurato correttamente e l’unità
è stata sbloccata.
Nota: una volta sbloccata correttamente l’unità datAshur PRO2, il LED VERDE continuerà a
lampeggiare solo per 30 secondi, durante i quali datAshur PRO2deve essere collegata a una
porta USB attiva.
Per bloccare datAshur PRO2, salvare tutti i dati ed espellere l’unità in sicurezza.
Sblocco con il PIN amministratore
1. Tenere premuto il pulsante
MAIUSC ( )per un secondo.
Il LED ROSSO diventerà fi sso.
2. Nello stato di standby (LED ROSSO
fi sso), premere il pulsante
CHIAVE () una volta.
I LED VERDE eBLU lampeggiano
insieme.
3. Inserire il PIN amministratore
e premere di nuovo il pulsante
CHIAVE ().
Il LED VERDE lampeggerà a indi-
care che l’unità è stata sbloccata
correttamente dall’amministratore.
datAshur PRO2 ora può essere confi gu-
rata (consultare il manuale dell’utente
precaricato nell’unità) o collegata a
una porta USB attiva per accedere ai suoi
contenuti.
Per sbloccare datAshur PRO2con il PIN
amministratore, seguire i semplici passaggi
indicati di seguito.
Puede que necesite cargar el dispositivo durante 30-60 minutos
antes de usarlo. Para ello, insértelo en un conector USB activo.
La unidad datAshur PRO2se suministra en el “estado inicial de envío”, sin ningún
PIN de administrador preajustado. Para poder utilizarla es necesario crear un PIN de
administrador de 7-15 dígitos como se indica abajo en la sección “Primer uso”.
Primer uso
1. Mantenga pulsada la tecla
SHIFT () durante un segundo.
Los LED ROJO yVERDE se
encenderán fi jos.
2. Mantenga pulsadas las
TECLAS ( ) +1.
El LED VERDE parpadeará y el LED
AZUL será fi jo
3. Introduzca su PIN de administra-
dor nuevo (de 7-15 dígitos) y pulse
la TECLA ( ) una vez.
El LED VERDE siempre parpadeará
y el LED AZUL permanecerá fi jo.
4. Vuelva a introducir su PIN de
administrador nuevo y pulse otra
vez la TECLA ().
El LED VERDE parpadeará para in-
dicar que el PIN de administrador
ha quedado correctamente confi -
gurado y la unidad desbloqueada.
Atención: Una vez que la unidad datAshur PRO2ha quedado correctamente desbloqueada, el LED
VERDE continúa parpadeando solamente 30 segundos más, durante los que hay que conectar la
datAshur PRO² a un puerto USB alimentado.
Para bloquear la unidad datAshur PRO2, guarde todos los datos y desconéctela de forma segura.
Desbloqueo con el PIN de administrador
1. Mantenga pulsada la tecla SHIFT
() durante un segundo.
El LED ROJO se encenderá fi jo.
2. Mientras la unidad está en el modo
de espera (LED ROJO fi jo), pulse la
TECLA ( ) una vez.
Los LED VERDE yAZUL empezarán
a parpadear juntos.
3. Introduzca su PIN de administra-
dor y pulse otra vez la TECLA ().
El LED VERDE empezará a
parpadear para indicar que la
unidad ha quedado correctamente
desbloqueada con permisos de
administrador.
A continuación podrá confi gurar la unidad
datAshur PRO2(consulte el manual que
viene precargado en su unidad) o conec-
tarla a un puerto USB alimentado para ver
el contenido de la misma.
Para desbloquear la unidad datAshur PRO2con
el PIN de administrador, siga los sencillos pasos
explicados abajo.
Première utilisation
1. Appuyez sur le bouton SHIFT ( )et
maintenez-le enfoncé pendant une
seconde.
Les LED ROUGE et VERTE
s’allumeront en continu.
2. Appuyez sur les boutons KEY () +1
et maintenez-les enfoncés.
La LED VERTE clignotera et la LED
BLEUE sera fi xe.
3. Saisissez votre nouveau code PIN
administrateur de 7 à 15 chiff res
et appuyez une fois sur le
bouton KEY ().
La LED VERTE clignotera toujours et
la LED BLEUE restera fi xe.
4. Saisissez à nouveau votre nouveau
code PIN administrateur et
appuyez à nouveau sur le
bouton KEY ( ).
La LED VERTE clignotera indiquant
que le code PIN administrateur
a bien été confi guré et que la clé est
déverrouillée.
Déverrouillage à l’aide du code PIN
administrateur
1. LED LIGHTS
- Standby state
- Unlocked
- Admin mode
3. SHIFT
2. KEY

Get a free 30 day trial of the award-winning iStorage DriveSecurityTM (powered by ESET)Antivirus software
that’s installed and runs directly from your USB drive, protecting it from being infected by any kind of malware.
iStorage DriveSecurityTM automatically scans, detects and eliminates threats before they can be transmitted to
your USB drive. With iStorage DriveSecurityTM running on your drive, you can be sure that it is malware free.
Extend your 30 day trial and purchase a 1/3/5 year license, available at www.istorage-uk.com
Holen Sie sich die kostenlose 30-Tage-Testversion der preisgekrönten iStorage DriveSecurityTM Antivirus-
Software. Sie ist auf dem USB-Stick installiert und wird von dort ausgeführt. So ist es vor der Infi zierung durch
Malware geschützt.
iStorage DriveSecurityTM scannt automatisch Bedrohungen, erkennt und beseitigt diese noch ehe sie auf Ihr
USB-Stick gelangen können. Wenn iStorage DriveSecurityTM auf Ihrem Gerät läuft, können Sie sicher sein,
dass es frei von Malware ist.
Verlängern Sie Ihre 30 Tage Testversion und kaufen Sie eine Lizenz, 1/3/5 Jahr, Erhältlich auf unserer Website:
www.istorage-uk.com
Ottieni per 30 giorni in prova gratuita il pluripremiato software antivirus iStorage DriveSecurityTM: è già
installato e funziona direttamente sul tuo dispositivo USB, per proteggerlo da qualsiasi attacco da parte di
malware.
iStorage DriveSecurityTM scansiona, rileva ed elimina automaticamente ogni minaccia prima che possa
raggiungere la tua unità USB. Installando iStorage DriveSecurityTM sul tuo dispositivo, la tua periferica USB
è a prova di malware.
Prolunga il tuo periodo di prova di 30 giorni e acquista la tua licenza, 1/3/5 anno/i disponibile sul nostro sito
web: www.istorage-uk.com
Essayez gratuitement pendant 30 jours le logiciel antivirus primé iStorage DriveSecurityTM, qui est installé et
fonctionne directement depuis votre périphérique USB, le protégeant d’une infection par tout type de malware.
iStorage DriveSecurityTM scanne, détecte et élimine automatiquement les menaces avant qu’elles ne soient
transmises à votre périphérique USB. Grâce à iStorage DriveSecurityTM sur votre périphérique, vous pouvez
être sûr que votre clé USB ne contient aucun malware.
Prolongez votre essai de 30 jours et achetez votre licence d’1/3/5 ans disponible sur notre site:
www.istorage-uk.com
Obtenga una prueba gratuita de 30 días del premiado software antivirus iStorage DriveSecurityTM que se
instala y ejecuta directamente desde su dispositivo USB, protegiéndolo ante las infecciones de cualquier tipo
de malware.
iStorage DriveSecurityTM analiza, detecta y elimina automáticamente las amenazas antes de que se transmi-
tan a su unidad USB. Con iStorage DriveSecurityTM equipado en su dispositivo, puede estar seguro de que su
USB está libre de malware.
Renueve su prueba de 30 días y adquiera su licencia de 1/3/5 años disponible en nuestro sitio web:
www.istorage-uk.com
iStorage DriveSecurity™ powered by ESET is based on the ClevX DriveSecurity technology licensed from ClevX, LLC.
Quick start guide
Schnellstartanleitung
Guida di avvio rapido
Guide de démarrage rapide
Guía de inicio rápido
Have you seen our portable
HDD/SSD & desktop drives?
From 128GB to 14TB
www.istorage-uk.com
ISTORAGE PRODUCT DISCLAIMER AND WARRANTY
iStorage warrants that on delivery and for a period of 24 or 36 months from delivery, its Products shall be free
from material defects. However, this warranty does not apply in the circumstances described below. iStorage
warrants that the Products comply with the standards listed in the relevant data sheet on our website at the
time you place your order.
These warranties do not apply to any defect in the Products arising from:
We shall not be liable for any material defects or defects in the encryption mechanism of the Products ascer-
tainable upon inspection on delivery unless you notify such defects to us within 30 days of delivery. We shall
not be liable for any material defects or defects in the encryption mechanism of the Products which are not
ascertainable upon inspection on delivery unless you notify such defects to us within 7 days of the time when
you discover or ought to have become aware of such defects. We shall not be liable under these warranties if
you make or anyone else makes any further use of the Products after discovering a defect. Upon notifi cation of
any defect, you should return the defective product to us. If you are a business, you will be responsible for the
transportation costs incurred by you in sending any Products or parts of the Products to us under the warran-
ty, and we will be responsible for any transportation costs we incur in sending you a repaired or replacement
Product. If you are a consumer, please see our terms and conditions.
Products returned must be in the original packaging and in clean condition. Products returned otherwise will,
at the Company’s discretion, either be refused or a further additional fee charged to cover the additional costs
involved. Products returned for repair under warranty must be accompanied by a copy of the original invoice,
or must quote the original invoice number and date of purchase.
If you are a consumer, this warranty is in addition to your legal rights in relation to Products that are faulty or
not as described. Advice about your legal rights is available from your local Citizens’ Advice Bureau or Trading
Standards offi ce.
The warranties set out in this clause apply only to the original purchaser of a Product from iStorage or an
iStorage authorized reseller or distributor. These warranties are non-transferable.
EXCEPT FOR THE LIMITED WARRANTY PROVIDED HEREIN, AND TO THE EXTENT PERMITTED BY LAW,
ISTORAGE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ALL WARRANTIES OF
MERCHANTABILITY; FITNESS FOR A PARTICULAR PURPOSE, NONINFRINGEMENT. ISTORAGE DOES NOT
WARRANT THAT THE PRODUCT WILL OPERATE ERROR-FREE. TO THE EXTENT THAT ANY IMPLIED
WARRANTIES MAY NONETHELESS EXIST BY OPERATION OF LAW, ANY SUCH WARRANTIES ARE
LIMITED TO THE DURATION OF THIS WARRANTY. REPAIR OR REPLACEMENT OF THIS PRODUCT, AS
PROVIDED HEREIN, IS YOUR EXCLUSIVE REMEDY.
IN NO EVENT SHALL ISTORAGE BE LIABLE FOR ANY LOSS OR ANTICIPATED PROFITS, OR ANY INCIDEN-
TAL, PUNITIVE, EXEMPLARY, SPECIAL, RELIANCE OR CONSEQUENTIAL DAMAGES, INCLUDING, BUT NOT
LIMITED TO, LOST REVENUES, LOST PROFITS, LOSS OF USE OF SOFTWARE, DATA LOSS, OTHER LOSS
OR RECOVERY OF DATA, DAMAGE TO PROPERTY, AND THIRD-PARTY CLAIMS, ARISING OUT OF ANY
THEORY OF RECOVERY, INCLUDING WARRANTY, CONTRACT, STATUTORY OR TORT, REGARDLESS OF
WHETHER IT WAS ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOTWITHSTANDING THE TERM
OF ANY LIMITED WARRANTY OR ANY WARRANTY IMPLIED BY LAW, OR IN THE EVENT THAT ANY LIM-
ITED WARRANTY FAILS OF ITS ESSENTIAL PURPOSE, IN NO EVENT WILL ISTORAGE’S ENTIRE LIABILITY
EXCEED THE PURCHASE PRICE OF THIS PRODUCT.
Under these warranties we will, at our option, either repair, replace, or refund you for, any Products found to
have material defects, provided that upon delivery:
• fair wear and tear;
• wilful damage, abnormal storage or working conditions, accident, negligence by you or by any third party;
• if you or a third party fail(s) to operate or use the Products in accordance with the user instructions;
• any alteration or repair by you or by a third party who is not one of our authorised repairers; or
• any specifi cation provided by you.
• you inspect the Products to check whether they have any material defects; and
• you test the encryption mechanism in the Products.