ITS Telecom EKSELANS CAP 2 User manual

ITS Partner O.B.S S.L · Av. Cerdanyola 79-81 Local C
08172 Sant Cugat del Vallés · Barcelona (Spain)
Phone: [phone] · [e-mail] · www.ek.plus
USER MANUAL
CAP 2
335002
Controller for access points
V03

ITS Partner O.B.S S.L · Av. Cerdanyola 79-81 Local C
08172 Sant Cugat del Vallés · Barcelona (Spain)
Phone: [phone] · [e-mail] · www.ek.plus
USER MANUAL CAP 2
TABLE OF CONTENTS
Hardware....................................................................................................................................................................................................................................... 4
Example of installation diagram................................................................................................................................................................................ 4
Access to CAP 2...................................................................................................................................................................................................................... 5
CAP 2 web interface............................................................................................................................................................................................................6
Network Function.................................................................................................................................................................................................................. 7
AC Setting............................................................................................................................................................................................................................... 7
Device Group .....................................................................................................................................................................................................................12
Zero config...........................................................................................................................................................................................................................13
Device Logs ........................................................................................................................................................................................................................14
Address Server.................................................................................................................................................................................................................15
LAN ..................................................................................................................................................................................................................................................16
WAN................................................................................................................................................................................................................................................17
WAN Setting.......................................................................................................................................................................................................................17
Policy Routing ..................................................................................................................................................................................................................18
Behavior .......................................................................................................................................................................................................................................19
Flow Control............................................................................................................................................................................................................................20
Smart Qos ............................................................................................................................................................................................................................20
Speed Limit.......................................................................................................................................................................................................................... 21
Routing Management ......................................................................................................................................................................................................22
Static Route .........................................................................................................................................................................................................................22
Port Mapping ...........................................................................................................................................................................................................................23
URL Filter ................................................................................................................................................................................................................................... 24
IP Filter.......................................................................................................................................................................................................................................... 24
MAC Filter.................................................................................................................................................................................................................................. 25
DMZ ................................................................................................................................................................................................................................................ 25
IP/Time Group ......................................................................................................................................................................................................................26
IP Group ................................................................................................................................................................................................................................26
Time Group......................................................................................................................................................................................................................... 27
Local auth .......................................................................................................................................................................................................................... 29
Device Management........................................................................................................................................................................................................30

ITS Partner O.B.S S.L · Av. Cerdanyola 79-81 Local C
08172 Sant Cugat del Vallés · Barcelona (Spain)
Phone: [phone] · [e-mail] · www.ek.plus
USER MANUAL CAP 2
Management.....................................................................................................................................................................................................................30
Modify Password .........................................................................................................................................................................................................30
Device Logs ........................................................................................................................................................................................................................31
Firmware Update............................................................................................................................................................................................................31
Examination.........................................................................................................................................................................................................................32
System Time.......................................................................................................................................................................................................................32

ITS Partner O.B.S S.L · Av. Cerdanyola 79-81 Local C
08172 Sant Cugat del Vallés · Barcelona (Spain)
Phone: [phone] · [e-mail] · www.ek.plus
4
USER MANUAL CAP 2
Hardware
•RESET: Reset button. Press for 15 seconds for the device to restore to factory settings.
•WAN: WAN port. Connect to the internet provider's router.
•LAN: LAN port.
•DC: DC power supply.
Example of installation diagram

ITS Partner O.B.S S.L · Av. Cerdanyola 79-81 Local C
08172 Sant Cugat del Vallés · Barcelona (Spain)
Phone: [phone] · [e-mail] · www.ek.plus
5
USER MANUAL CAP 2
Access to CAP 2
To access the CAP 2 follow the next steps:
1. Connect to CAP 2 with a network cable or wireless configuration.
2. Connect to CAP 2 with a network cable or wireless configuration (with an AP), you always
must be connected to its LAN port. Configure your PC's network adapter with a static IP. In
order to make the configuration easy, EK have the application Ek NET Adapter, you will be
able to configure the network adapter easily. You can download from
https://ek.plus/software/ you will find a new section "EK NET ADAPTER".
3. Open a web browser and go to the URL: http://192.168.10.1
4. Enter the user and password: admin / admin

ITS Partner O.B.S S.L · Av. Cerdanyola 79-81 Local C
08172 Sant Cugat del Vallés · Barcelona (Spain)
Phone: [phone] · [e-mail] · www.ek.plus
6
USER MANUAL CAP 2
CAP 2 web interface
Once the password is entered, the following window will appear.
Then, it shows to us the next areas:
1. Shows the number of connected clients.
2. Displays the real-time bandwidth of each WAN network (provider).
3. Displays RAM and CPU usage information.
4. When clicked, it allows you to view the information of the selected WAN:
5. Displays relevant information about the number and status of Aps.
6. Menu

ITS Partner O.B.S S.L · Av. Cerdanyola 79-81 Local C
08172 Sant Cugat del Vallés · Barcelona (Spain)
Phone: [phone] · [e-mail] · www.ek.plus
7
USER MANUAL CAP 2
Network Function
AC Setting
This section shows all the APs connected to the controller CAP 2.
1. Displays information regarding APs:
•SN: ID assigned to the AP by CAP 2.
•Location: Location of the AP identified by the customer.
•Name: AP name.
•IP: IP assigned to the AP by CAP 2. If we connect to the NETWORK with the RANGE
indicated on this IP, we will be able to access the WEB interface of the AP directly.

ITS Partner O.B.S S.L · Av. Cerdanyola 79-81 Local C
08172 Sant Cugat del Vallés · Barcelona (Spain)
Phone: [phone] · [e-mail] · www.ek.plus
8
USER MANUAL CAP 2
•Users: User number connected to the AP. Clicking will open a new window giving
information about connected customers.
•Channel: Channel over which the AP is transmitting the SSID of the AP (2.4Ghz / 5.8Ghz
according to model).
•Tx power: 2.4Ghz / 5.8Ghz frequency output power.
•Online Time: Shows how long the AP takes on.
•Group: Displays the name of the group to which the AP is assigned.
After pressing the CONFIG button of the desired AP, open a new window to configure the AP in question:
“Device Status" shows us relevant information about the AP:
•Model: Product name.
•Online Time: Shows how long the AP takes on.
•MAC Device: Displays MAC.
•IP device: IP assigned to the AP by CAP 1. If we connect to the NETWORK with the RANGE
indicated on this IP, we will be able to access the WEB interface of the AP directly.
•Software: Displays the software version that the AP is currently using.
•AC IP: CAP 2 IP.
•SSID: SSID names.
•BSSID: Displays the MACs assigned to the different SSIDs.
•Channel: Channel on which the AP is transmitting the SSID of the 2.4Ghz / 5.8Ghz AP
•Security: Displays selected security for SSIDs.
•RF Output Power: Shows the emission power of the AP.
•Beacon Interval: Displays the selected "beacon interval" value.
•Coverage Threshold: Shows us the selected "threshold”

ITS Partner O.B.S S.L · Av. Cerdanyola 79-81 Local C
08172 Sant Cugat del Vallés · Barcelona (Spain)
Phone: [phone] · [e-mail] · www.ek.plus
9
USER MANUAL CAP 2
“Device Network " allows you to configure how the AP obtains IP:
•DHCP: Gets the DHCP IP automatically from CAP 2.
•Static IP: Allows you to manually assign the desired IP to the AP.
The "Wireless Basic" menu allows you to configure the basic options:
•Device list: If the AP has only a 2.4 or 5.8 broadcast band, it will correspond to WLAN 1, if on
the contrary the AP has 2.4 and 5.8 the WLAN 1 will correspond to 2.4 GHz and WLAN 2 to
5.8 GHz.
•AP configuration: APs allow you to configure up to 4 SSIDs.
•Status: Enabled –Enables SSID, Disabled –Disables SSID.
•Broadcast SSID: Enabled - Emits SSID, Disabled –Hidden SSID,
•SSID: SSID Name.

ITS Partner O.B.S S.L · Av. Cerdanyola 79-81 Local C
08172 Sant Cugat del Vallés · Barcelona (Spain)
Phone: [phone] · [e-mail] · www.ek.plus
10
USER MANUAL CAP 2
•Wireless Security: Displays the assigned security. To see more details and configure it, click
on the "Config" button. A new window will open to set up wireless security.
•VLAN: Allows you to assign a VLAN to the SSID.
The "Wireless Advanced" menu shows more options for the most technical-level AP:
•MODE: Select the standard for wireless N/AC.
•Channel: Channel on which the AP is transmitting the SSID of the 2.4Ghz/ 5.8Ghz AP.
•Client Isolation: Enabled: Users are isolated and cannot be seen among themselves.
•RTS Threshold: Reduce this value if there are electromagnetic problems or traffic saturation
in the network.

ITS Partner O.B.S S.L · Av. Cerdanyola 79-81 Local C
08172 Sant Cugat del Vallés · Barcelona (Spain)
Phone: [phone] · [e-mail] · www.ek.plus
11
USER MANUAL CAP 2
•Beacon interval: Interval for "beacon". The "beacon" is a packet that is sent to the client
computer to notify if it is connected. If the time is reduced, more packets will be sent
making the network slower. And if the value is too high, this will cause the equipment to
disconnect more frequently.
•Aggregation: Allows for higher flow.
•Short GI: Improves flow rate. Use only for N mode and deactivate if mixed mode is used.
•Coverage Threshold: Indicates the maximum allowed power that the client can have to stay
connected to the AP. Beyond this power the AP will disconnect the client.
•MAX station: Maximum number of clients that can be connected.
2. Batch Set: Selecting one or more APs and clicking on the Group function will open a new
window. This feature allows one or more APs to configure a number of equal options:
•Channels and Powers.
•Time when APs reboot (watch dog).
•Maximum users allowed when connecting.
•Password.
3. Refresh: Reapply the group configuration to the selected AP.
4. Delete: Remove ap from CAP 2.
5. Reboot: Restart the selected AP.
6. Reset: Empty the list.
7. Reset: Returns the selected AP to factory settings.
8. Update: Updates the firmware of the selected AP. Clicking opens a new window to select
the firmware.

ITS Partner O.B.S S.L · Av. Cerdanyola 79-81 Local C
08172 Sant Cugat del Vallés · Barcelona (Spain)
Phone: [phone] · [e-mail] · www.ek.plus
12
USER MANUAL CAP 2
Device Group
This section lists all groups created in CAP 1. A group contains multiple APs that are set to the same
setting.
1. Add Group: Open the window to define the group settings. The form is the same as in point
2 of the "Equipment List" section.
Note: Select a specific time of day when APs are restarted.
2. Delete Group: Deletes the group, but the configuration on the APs is still maintained.
3. Contains AP: Indicates the number of APs connected to the group. Pressing the + button
displays a window with all the APs, allowing you to select the ones you want to add to the
group.
4. Config: By clicking on the edit button in the corresponding group, you can carry out the
configuration for the APs.

ITS Partner O.B.S S.L · Av. Cerdanyola 79-81 Local C
08172 Sant Cugat del Vallés · Barcelona (Spain)
Phone: [phone] · [e-mail] · www.ek.plus
13
USER MANUAL CAP 2
Zero config
This function allows, before connecting any APs to CAP 2 create a default configuration. There can only
be one Zero configuration and once all the APs that are connected to CAP 2 are created, they will be
taking this default setting.
1. Add Group: Opens the window so that you can create the settings that will be used by the
default APs. The form is the same as in point 2 of the Teams List section.
Note: Allows you to select a certain time of the day when you want APs to be restarted.
2. Delete Group: Removes the default settings, but the settings on the APs are still maintained.
3. Config: By clicking on the edit button, you can create the default settings.

ITS Partner O.B.S S.L · Av. Cerdanyola 79-81 Local C
08172 Sant Cugat del Vallés · Barcelona (Spain)
Phone: [phone] · [e-mail] · www.ek.plus
14
USER MANUAL CAP 2
Device Logs
This section shows the activity event log for access points.
Date, computer ID and MAC are displayed for each event that is happening:
•On/ Off
•Deploying and configuring APs.
•Errors
The "ClearLog"”button empty’s the list of records.

ITS Partner O.B.S S.L · Av. Cerdanyola 79-81 Local C
08172 Sant Cugat del Vallés · Barcelona (Spain)
Phone: [phone] · [e-mail] · www.ek.plus
15
USER MANUAL CAP 2
Address Server
This section configures DHCP that will assign IPs to different APs that connect to CAP 2.
1. Server IP Address: It shows the initial IP for DHCP as well as the IP that will link between the
APs and CAP 2 (IP Server is a second IP for CAP 2 in the range that the APs will be). The
number of IPs that you can assign.
2. Server Address Count Displays the AP model, its assigned IP address, and its
corresponding MAC. The remaining time for the IP to be updated is also shown.
3. Refresh: Refresh the page.
4. Apply: Apply the changes made.

ITS Partner O.B.S S.L · Av. Cerdanyola 79-81 Local C
08172 Sant Cugat del Vallés · Barcelona (Spain)
Phone: [phone] · [e-mail] · www.ek.plus
16
USER MANUAL CAP 2
LAN
1. LAN Settings: Configure the IP and subnet mask of CAP 2.
2. DHCP Server Setting: Turns DHCP on or off. Configure DHCP Initial IP and End IP.
3. Static DHCP: Allows you to assign fixed IPs to a MAC. This way the MAC will always have
the same IP, which is ideal to be able to apply QoS.

ITS Partner O.B.S S.L · Av. Cerdanyola 79-81 Local C
08172 Sant Cugat del Vallés · Barcelona (Spain)
Phone: [phone] · [e-mail] · www.ek.plus
17
USER MANUAL CAP 2
WAN
WAN Setting
The CAP 2 allows you to change 3 of your LAN ports and enable them as WAN ports. In this way it is
possible to have up to 4 WAN connections, 1 per ISP.
Clicking on the "Config" button on each WAN will open a sale to be able to configure:
CAP 2 allows you to configure the WAN port in different ways; Static IP, DHCP, PPPoE, or disabled. If the
WAN is disabled, the port will function as a LAN port.
It is also possible to limit the throughput of each WAN with the "Band Type", Downstream and Upstream.
Allows you to configure access to the CAP 2 web interface over the WAN.

ITS Partner O.B.S S.L · Av. Cerdanyola 79-81 Local C
08172 Sant Cugat del Vallés · Barcelona (Spain)
Phone: [phone] · [e-mail] · www.ek.plus
18
USER MANUAL CAP 2
Policy Routing
This feature allows you to control and direct traffic through rules and routes to the WAN you
want.
1. Add : Adds a route. Clicking will bring up the following window:
•Status: Enables or disables the rule.
•Policy type: Determines the type of font to use for the rule. Define: Source of an IP,
destination of an IP, domain, a specific port, a MAC and an interface.
•WAN: Determines the WAN where traffic will be redirected.
2. Delete: Deletes the selected route.
3. Apply: Applies routes that have been created.
4. Config: Allows you to edit the selected route.

ITS Partner O.B.S S.L · Av. Cerdanyola 79-81 Local C
08172 Sant Cugat del Vallés · Barcelona (Spain)
Phone: [phone] · [e-mail] · www.ek.plus
19
USER MANUAL CAP 2
Behavior
CAP 2 allows you to control traffic behavior.
It allows you to identify different types of service and group them into different "Application Class"
and give them a certain behavior.
1. Add: Allows you to add a behavior. Clicking will bring up the following window:
•Status: Enables or disables the speed limit.
•IP Group: Assigns a group of IPs to which the behavior in question will be applied.
•Time Group: Assign a "Time Group" so that the rule only applies in the given time
zone.
• Application Class: Select the desired "Application" group to shit the related
"Application Info". Check "Select all the software in the class" to block all
services belonging to that class.
•Application Info: Select a particular "service".
•Action: Reject –Denies Application Class or Application Info traffic.
2. Delete: Delete selected behavior.
3. Apply: Applies behaviors that have been created.
4. Config: Allows you to edit the selected behavior.

ITS Partner O.B.S S.L · Av. Cerdanyola 79-81 Local C
08172 Sant Cugat del Vallés · Barcelona (Spain)
Phone: [phone] · [e-mail] · www.ek.plus
20
USER MANUAL CAP 2
Flow Control
This function allows you to control the flow of traffic circulating through CAP 2.
Smart Qos
It allows you to identify different types of service and group them into different "Application Class"
and give them a priority over bandwidth.
It can be given more or less priority depending on our needs.
Pressing "Custom priority bandwidth" will open a window in which it will be possible to adjust
the % on priorities: