Operation
• Adding Water:
Snap the water tank off the main housing of the unit. Open the top of the tank. Fill the measuring cup with purified water. Pour water
into tank, close the top, and then snap it back into the housing.
• Plug the unit into a standard household AC outlet. Indicator will light up. The water will heat in about 30 seconds and the indicator
light will turn off.
• Press the steam button to release steam. Use caution.
• To steam clothing: Put garment on a hanger. Pull lightly on the garment with one hand. Hold steamer in the other hand, direct the
steam nozzle toward the garment, press the steam button down, and move the steamer up and down and/or back and forth along the
garment to release wrinkles.
• Use caution when attaching accessories. Release the steam button and make sure the nozzle has cooled first.
• To create a crease: Attach the crease attachment to the nozzle. Clip the garment between the
attachment and the nozzle. Push the steam button. Move the steamer along the garment in a straight
line to create a crease.
• Cleaning fabrics:
Use the bristle brush and lint remover attachments to clean, refresh, brush, and remove lint or loose threads from fabrics.
Specifications
Power rating: AC 110V, 60Hz
Output: 1500W
Power cord length: 6.5 ft. (2m)
Water tank capacity: 2.8 oz. (85ml)
Heating time: Approx. 30 seconds
Operating time: 6 – 8 minutes
Steam rate: 12.5 – 14.5g/min.
Material: ABS plastic
Dimensions: 12.3" x 6" x 4.2" (312 x 151 x 107mm)
Weight: 24.6 oz. (0.7kg) / 30 oz. (.86kg) with attachment
Customer Service:
info@myivation.com
866-849-3049
Distributed by
C&A Marketing
114-132 Tived Lane East
Edison, NJ
08837 USA
Made in China
Ivation is a trademark of
C&A IP Holdings, LLC
©2016 All rights reserved