J.Burrows JBDRAFFABK User manual

DELUXE DRAFTING CHAIR
ASSEMBLY
INSTRUCTIONS
JBDRAFFABK/JBDRAFPUBK
1/11
Weight capacity:120kg
1 CTN
www.officeworks.com.au
For spare parts or hardware call 1300 OFFICE
This design and instruction booklet is subject to copyright.

2/11
Estimated Assembly Time: 30 minutes
Furniture Assembly Instructions S
Assembly Video
Customer Service Contact Details
Spare Parts & Hardware
1300 OFFICE
People Required
General Advice
To view an assembly video, go to https://www.officeworks.com.au/
Search the product by item code or name:
Click on the icon to watch the video.

3/11
Officeworks Ltd. | 236-262 East Boundary Road | Bentleigh East VIC 3165 | AUSTRALIA
NOTE
•Please check you have all hardware before assembling.
•If you are missing any hardware, please contact the store of purchase.
•Please ensure you have the name of the item, required hardware part and quantity.
•Please retain your receipt as proof of purchase to validate your warranty.
CAUTION
•Do not tighten screws before all screws are in the right place.
•Do not use this product unless all bolts and screws are firmly secured.
•Check that all bolts and screws are securely tightened at least every 4 months.
WARNING
•If parts are missing, broken, damaged or worn stop using the product until all repairs
are made using manufacturer authorised parts.
•Failure to follow these warnings could result in serious injury.
DANGER
•CHILDREN MUST BE SUPERVISED.

Parts List
Hardware List
4/11
Ax5
Dx1 Ex1
Gx1 Hx1
Ix2 Jx2 Kx1
Fx1
Bx1 Cx1
1/4x20mm 1/4x22mm M5

Step 1
Step 2
5/11
B
A
C
B
Assembly

Step 3
Step 4
6/11
D
E
B
D

Step 5
Step 6
7/11
Ix2
Jx2
Kx1
G
F
KK
JI
GD

Step 8
Step 7
8/11
H
G

Step 8
Step 7
9/11
H
G

10/11
Step 9

11/11
Chair Height Adjustment
Back Tilt
Care Instructions - Fabric Chairs
Dust and vacuum chair fabric to remove dust and dirt.
Wipe over surfaces with damp cloth rinsed in warm water and mild detergent.
If any stains persist, use a water-based cleaner.
Ensure a spot test is complete first to ensure it does not affect the fabric color.
Do not use harsh detergents, solvents or abrasive cleaners.
Clean, check and tighten all parts regularly.
Pull up the lever, located
underneath the right side of the
seat.
Adjust the back to your desired
angle, then push the lever down
to lock the back into position.
To increase chair height pull
lever upward while lifting body
weight slightly off the seat.
Release lever at desired height.
To lower chair height sit fully
into the chair and pull lever
upward.
Release lever at desired height.
Care Instructions - PU Chairs
Wipe with a damp cloth & mild soap. Wipe dry immediately with an absorbent drycloth.
Treat spills immediately with an absorbent cloth by blotting the spill.
Do not use detergents, solvents or abrasive cleaners.
Avoid contact with skin, in particular during high temperatures & humidity.
Clean, check & tighten all parts regularly.
Thank you for your purchase. Please retain your receipt to validate warranty.
If you would like to know more about our furniture products, please visit www.officeworks.com.au