J.Burrows JBHARVNBBK User manual

Assembly Instructions
HARVARD HB
EXECUTIVE CHAIR
This Chair has a load rating of 130kg
1
JBHARVNBBK/JBHARVHBWH

φ6*φ18
Important
Estimated Assembly Time: 30min
Please check you have all hardware components before assembling.
If you are missing any hardware components from the Hardware List please contact My Zone on
Tel: [phone] or Email: [email protected]
Please ensure you have the name of the item, store purchased from, hardware part required
and quantity.
Please retain your receipt to validate warranty. Enjoy your new purchase!
PART
A C
4
1 1 1 1 1
D
1 5 4 42 4
E F G H
M6*20 M8*30 M8*40
LIST
HARDWARE LIST
2
1 2 3 4 5
2
6
B
2
M6*30
φ6*φ18 φ8*φ18
4
I

Ste
F×5
p1
Ste p 2
F
1
3
1
2

Step 3
Step 4
4
E
E
C
H
FRONT
FRONT
3
4
5
G
B
E
G
A
Note:Do not tighten screws fully until you have completed assembly.

Your Harvard HB Executive chair is now complete and ready for use.
IMPORTANT NOTE: Periodically check and re-tighten screws
Step 5
Step 6
Officeworks Superstores Pty Ltd 236-262 East Boundary Road East Bentleigh 3165 Australia
5
E
D
Step 7
I
6

HARVARD HB EXECUTIVE CHAIR FEATURES
*Chair Height Adjustment
-To increase chair height pull lever
upward while lifting body weight
slightly off the seat.
-Release lever at desired height.
-To lower chair height sit fully into
the chair and pull lever upward.
-Release lever at desired height.
*Chair Tension Adjustment
-Pull lever out to unlock & allow
chair to tilt back & forth.
-Pull lever to lock.Chair will have
slight movement in locked position.
*Adjustable Chair Tension Speed
-Turn continuously to adjust how quickly
chair tilts back & forth.
-Note: If adjusting while sitting in chair:
Turn knob left to tighten tension.
Turn knob right to loosen tension.
6