J.Burrows JBWBPOR189 User manual

PORCELAIN BOARD
JBWBPOR189 (90X180cm)
JBWPOR1812 (120X180cm)
JBWPOR2112 (120X210cm)
JBWPOR2412 (120X240cm)

PART LIST & Qty
Applicable
Product Size
( cm )
[1] Board [2] J Rails
90X180
120X180
120X210
120X240
1 Pc
1 Pc
1 Pc
1 Pc
1600 mm / 1 Pc
1600 mm / 1 Pc
1800 mm / 1 Pc
2160 mm / 1 Pc
PART LIST & Qty
Applicable
Product Size
( )
[3] [4]
90X180
120X180
120X210
120X240
1110mm x 1
1110mm x 1
1110mm x 1
1110mm x 1
4 Pcs
4 Pcs
5 Pcs
5 Pcs
Pen Tray Phillips Screws
(for Tray, Ø3.5X8mm)
HARDWARE LIST & Qty
Applicable
Product Size
( )
[A] Screw [B] Plastic Anchor
90X180
120X180
120X210
120X240
5 Pcs
5 Pcs
6 Pcs
7 Pcs
5 Pcs
5 Pcs
6 Pcs
7 Pcs
cm
cm

STANDARD MOUNTING
REQUIRED TOOLS
Attach the pen tray to the board
a ) Place board face down on a table
b ) Align pen tray [3] With pre-drilled holes along the lower edge of metal board frame
c ) Place small screws [4] through pre-drilled holes in the pen tray into the metal board frame.
Tighten screws with a Phillips screwdriver . Do not over-tighten
d ) Make sure that the plastic guards on either end of the tray are firmly attached
[4]
[3]
STEP 1

[2]
Draw 1 parallel lines the sam e length as th e J R a ils
[2] at the des ired height .
STEP 2
STEP 3

Use tot al 5pcs of sc rews for 90x 180cm board
Use tot al 5pcs of screws for 120 x180cm bo ard
Use tot al 6pcs of screws for 120 x210cm bo ard
Use tot al 7pcs of screws for 120 x240cm bo ard
[2]
[A] [B]
STEP 4
STEP 5

Hang built-in brackets into J Rail.
STEP 6

lncludes a hazardous situation that, if not avoided, could result in death or serious injury:
- To reduce the risks associated with choking, dispose of all unused small parts after
assembly.
- Do not intentionally inhale the contents of the dry erase markers - use only in
well-ventilated areas.
- To reduce the risks associated with hazardous voltage and damage to utilities, avoid
piercing electrical cables and other utilities concealed behind the wall or drilling surface.
Includes a hazardous situation, which if not avoided, could result in minor or moderate
injury.
- To reduce the risks associated with impact injuries and property damage:
- Read and follow the assembly and mounting instructions.
- Do not hang from or place excessive weight on the marker tray.
- Do not hang dry erase boards over beds.
- To reduce the risks associated with lifting, always follow safe lifting and handling
practices.
- Do not allow children under the age of three to use the dry erase markers without adult
supervision.

Warranty 8 years
Product Warranty – valid for Australian customers only
Officeworks Ltd warrants that this product will be free from defects and work as intended
for 8 years from the date of purchase by the original customer.
If the product has any defects or does not work as intended during the Warranty Period,
Officeworks will, at its election and at its expense, repair or replace the product.
This warranty does not apply:
• to cosmetic damage;
• to damage caused by consumables used in connection with the product (such as
cleaning products);
• where the product has not been used in accordance with all provided instructions;
• to damage arising from fair wear and tear;
• where the product has not been subject to reasonable use;
• where the product has been intentionally or negligently damaged; and/or
• if the customer has attempted to repair the product.
To make a claim under this warranty, please return your product with your receipt or proof
of purchase to your nearest Officeworks store or contact 1300 633 423.
Thank you for your purchase. Please retain your receipt to validate warranty. lf you would
like to know more about our furniture products, please visit
www.officeworks.com.au
Officewords Ltd.｜236-262 East Boundary Road｜Bentleigh East VIC 3165｜AUSTRALIA