Jabra BlueParrott B650-XT User manual

BlueParrott
B650-XT/S650-XT
User Manual
© 2021 GN Audio A/S. All rights reserved. Jabra®is a
trademark of GN Audio A/S. The Bluetooth®word mark and
logos are registered trademarks owned by the Bluetooth
SIG, Inc. and any use of such marks by GN Audio A/S is under
license.
Declaration of Conformity can be found on
www.jabra.com/doc
Made in China
MODEL: OTE960

3
ENGLISH
Contents
1. Welcome.........................................5
2. Headset overview.........................6
2.1 BlueParrott B650-XT
2.2 BlueParrott S650-XT
2.3 Included accessories
3. How to wear...................................9
3.1 Switch from stereo to mono sound
4. How to charge............................ 11
5. How to connect.......................... 13
5.1 Power on
5.2 Power o
5.3 Pair using Bluetooth
5.4 Pair using NFC
6. How to use ................................. 16
6.1 Calls
6.2 The BlueParrott ButtonTM
6.3 Voice controlTM
6.4 Active Noise Cancellation
6.5 HearThrough
6.6 Multiple call handling
6.7 Multipoint mode
6.8 How to reset
4
ENGLISH
7. BlueParrott app ......................... 25
8. Support ........................................ 26
8.1 FAQ
8.2 How to care for your headset
8.3 How to clean your headset

5
ENGLISH
1. Welcome
Thank you for using the BlueParrott B650-XT
or S650-XT. We hope you will enjoy it!
BlueParrott B650-XT/S650-XT features
• Crystal-clear calls anywhere. Ultra-noise-
cancelling mic removes 96% of background
noise.*
• The best of both worlds. Converts easily
from stereo to mono sound with a removable
second earcup.**
•Silence the road. Powerful Active Noise
Cancellation (ANC) helps you focus on what
you’re listening to.
• A battery that runs and runs. Get up to 36
hours of talk time on a single charge.
• Built for life on the road. With IP54-rated
protection against dust and water, the
S650-XT is truly roadworthy.
•Personalize your experience. Speed dial,
mute, or Push-to-Talk, with the customizable
BlueParrott Button™.
•Hands on the wheel. Eyes on the road. 100%
hands-free voice control lets you direct the
headset with just your voice.
* Verified by independent labs
** Available for S650-XT out of the box. Convert B650-XT to stereo with the
second earcup, which is available as accessory.
6
ENGLISH
2. Headset overview
2.1 BlueParrott B650-XT
*The BlueParrott ButtonTM is customizable using the BlueParrott app
Flexible
microphone
3.5mm audio port
BlueParrott ButtonTM*
Power on/o (hold)
Volume up
Volume down
Mute microphone
Voice commands
Answer/end call
Reject call (hold)
Skip track (side button)
ANC/
HearThrough
Skip track
USB-C charging
port
NFC Zone
Connector
for optional
second
earcup
(available as
accessory)

7
ENGLISH
2.2 BlueParrott S650-XT
*The BlueParrott ButtonTM is customizable using the BlueParrott app
Flexible
microphone
3.5mm audio port
BlueParrott ButtonTM*
Power on/o (hold)
Volume up
Volume down
Mute microphone
Voice commands
Answer/end call
Reject call (hold)
Skip track (side button)
Skip track
Earcup release
(one button on
each side of the
earcup)
NFC Zone
ANC/
HearThrough
USB-C charging
port
8
ENGLISH
2.3 Included accessories
Second earcup for
stereo sound
(included with S650-XT)
USB-C cable 3.5mm jack cable
(included with S650-XT)
Car charger
(included with B650-XT)
Microphone
windscreens
Carry case
(included with
S650-XT)

9
ENGLISH
3. How to wear
The headset can be worn with the microphone
on the left or right side. Adjust the headband
for best fit, and position the flexible microphone
one finger width from the corner of your
mouth.
L R
10
ENGLISH
3.1 Switch from stereo to mono sound
Press both release buttons on the earcup and
firmly pull the earcup down to remove it from
the headset. After removing the second earcup,
the headset is ready to be worn.
For the B650-XT headset, a stereo earcup can
be purchased at blueparrott.com/accessories

11
ENGLISH
4. How to charge
To charge the headset, connect the USB-C
charging cable to the headset’s charging port.
It is recommended to charge the headset using
the supplied charging cable.
It takes up to 192 minutes to fully charge the
battery.
12
ENGLISH
While charging, the LED indicator shows the
charging status. Red indicates the headset is
charging. Blue indicates the headset is fully
charged.
Charging Fully charged
Low battery

13
ENGLISH
5. How to connect
5.1 Power on
Press and hold the Multi-function button for 1
second until the LED flashes blue and you hear
“Power on”.
Power
on
1 sec
5.2 Power o
Press and hold the Multi-function button for 3
seconds until the LED flashes red and you hear
“Power off”.
Power
off
3 sec
14
ENGLISH
5.3 Pair using Bluetooth
1. Ensure the headset is powered off.
2. Press and hold the Multi-function button for
approx. 6 seconds until you hear “Pair mode”
and the LED flashes red and blue. The
headset is now ready to pair.
3. Go to the Bluetooth menu on your
smartphone and select B650-XT or S650-XT
from the list of available devices.
Pair
mode
6 sec

15
ENGLISH
5.4 Pair using NFC
1. Ensure your headset is powered on and that
NFC is enabled on your smartphone.
2. Place the NFC zone of your smartphone
against the NFC zone of the headset until
your smartphone confirms the connection.
Please note that not all phones support NFC
pairing.
NFC Zone
16
ENGLISH
6. How to use
6.1 Calls
What the buttons do
Answer call Press the Multi-function
button
End call Press the Multi-function
button
Reject call
Press and hold (2 sec)
the Multi-function
button
Activate Voice
Assistant (i.e. Siri,
Google Assistant)
Press the Multi-function
button when not on
a call
BlueParrott ButtonTM*
Volume up button
Volume down button
Multi-function button
Skip track button
ANC/HearThrough
button
Skip track button

17
ENGLISH
Skip track
forward or back
Press the Skip track
button.
Cycle
between ANC,
HearThrough
and O
Press the ANC/
HearThrough button
Adjust volume
Press the Volume up or
Volume down button,
when listening to music
or on a call.
18
ENGLISH
Transfer audio
from headset to
smartphone
While on a call, press
and hold (2 sec) the
Volume down button
to transfer to the call
audio to your paired
smartphone. Repeat to
transfer the call audio
back to your headset.
This featue is phone
dependant.
Redial last
number
Press and hold (1 sec)
the Volume down
button until you hear
a beep.
Mute/un-mute
microphone
Press the BlueParrott
Button when on a call.
Alternatively, press
and hold (2 sec) the
Volume up button.
Voice control
Press the BlueParrott
Button when not on a
call and say "What can
I say?" for a list of voice
commands.

19
ENGLISH
6.2 The BlueParrott ButtonTM
By default, the BlueParrott Button mutes the
microphone. However, the button can be
configured for other functions, such as speed
speed dial, push-to-talk, access second paired
mobile device, or to check the battery level.
To change the BlueParrott Button functionality,
use the BlueParrott app for Android or iOS.
20
ENGLISH
6.3 Voice controlTM
The headset can be controlled by giving it voice
commands, such as "Answer" to answer an
incoming call, or "Ignore" to reject an incoming
call
To use more voice controls, tap the BlueParrott
Button and say "Hello BlueParrott". You can
then issue one of the commands below.
• Pair Mode
• Phone Command
• Am I Connected?
• Check Battery
• Redial
• Call Back
• Play Music
• Cancel
• What can I say?