Jabra BT 320S Installation and operation manual

Jabra BT320s Software upgrade - a step-by-step guide
Main features
•Improved connectivity to Jabra A320s
•A2DP reconnect fix for some new models of phones.
•Motorola Q and LG8500 streaming improvements
•Improvement on pairing second device
•Prevent disconnect when suspending A2DP
PLEASE READ CAREFULLY BEFORE PROCEEDING
STEP-BY-STEP
We recommend you download and print these instructions for handy
reference
Just follow these three easy steps to upgrade your Jabra BT320s
STEP 1
• Connect your BT320s to your PC by inserting the USB cable* into the
charging socket of the BT320s (see illustration) and insert the USB
connector into an USB port on your PC. Make sure your Jabra BT320s is
turned off.
*Please contact your local distributor / reseller for details.

Immediately after connection, your Jabra BT320s will start charging
which will be indicated by the LED light being solid red.
Simultaneously, press both the Play/Pause button (5) and the Skip
Track button (11) until the LED light turns solid yellow (see
illustration) – the Jabra BT320s is now in upgrade mode. Your PC will
now automatically find your Jabra BT320s.
STEP 2
• To start the software upgrade application unzip the attached
software then save to your desktop.

This screen will now show and the software update will start
automatically. The software update may take several minutes. PLEASE
DO NOT DISCONNECT YOUR HEADSET DURING UPGRADE.
STEP 3
• After successful upgrade this screen will show and the LED will be
solid red again. Click “Finish” and you can now disconnect your
BT320s. The Jabra BT320s is now updated with the latest software.