Jabra BTE6 User manual

jabra.com/motionuc
Jabra
Motion UC
NEED MORE HELP?
For all support go to jabra.com/support
81-03755 E

Quick start guide
Jabra
Motion UC

Made in China
Model: BTE6
Declaration of Conformity can be found on
www.jabra.com/CP/US/declarations-of-conformity
© 2013 GN Audio A/S(GN Netcom A/S). All rights reserved. Jabra®
is a trademark of GN Audio A/S. The Bluetooth®word mark and
logos are registered trademarks owned by the Bluetooth SIG, Inc.
and any use of such marks by GN Audio A/S is under license.

ENGLISH ...............................1
DEUTSCH .............................7

1
CONNECTING WITH THE JABRA LINK 360
The headset and the Jabra Link 360 are pre-paired.
Simply plug the Jabra Link 360 into a USB port
on your PC.
CONNECTING WITH A BLUETOOTH DEVICE
1. Press and hold the Call button and open the ip boom-arm at the
same time. Release the Call button when the Bluetooth light rapidly
ashes blue.
2. Wear on the ear and follow the
voice-guided connection instructions.
CONNECTING WITH AN NFC DEVICE
To pair using an NFC-enabled device, refer to the online user manual.
1 HOW TO CONNECT

2
ENGLISH
2 HOW TO WEAR
HEIGHT ADJUSTMENT
Get the perfect t for your ear by adjusting the
height of the speaker up or down.
LEFT OR RIGHT EAR WEARING STYLE
The headset can be worn on the left or right ear. To switch ear:
1. Pull the speaker all the way down.
2. Rotate the speaker 180°.
3. Twist the eargel around to t.

3
3 HOW TO USE
Did you know?
You can download the User Manual at jabra.com/motionuc to learn more about
additional features. The Jabra Connect app is now available for android or iOS
devices.
Jabra Link 360
Volume
touch-sensitive
panel Call button
LED indicators
Voice and Mute
microphone button
Busy light
indicator

On/o Open or close the ip boom-arm
Answer call Open the ip boom-arm, or tap the
Call button if the boom-arm is open
End call Close the boom-arm, or tap the Call button
Talk time status When not on a call, tap the Call button to hear the
remaining talk time
Reject call Double-tap the Call button when there is an incoming
call
Redial last number Double-tap the Call button when not on a call
Adjust Speaker volume Slide a nger up/down the Volume
touch-sensitive panel
Voice commands
Tap the Voice and Mute microphone button when
not on a call, until you hear 'Sagen Sie einen Befehl'. Say
'Was kann ich sagen' for a list of voice commands
Mute microphone Tap the Voice and Mute microphone button during
a call
4
3 HOW TO USE

5
4 MOTION SENSOR CONTROLS
CALL ASSIST
Pick up the headset from
the desk to your ear to
automatically answer
an incoming call.
HIBERNATION MODE
To extend battery life, the headset will enter
hibernation mode when it has not been moved
for 60 minutes (when Bluetooth connected)
or 5 minutes (when not Bluetooth connected).
Note: Motion sensor controls are default-enabled, and can be disabled in Jabra PC
Suite and/or the Jabra Connect app.

5 TRAVEL & CHARGE KIT
The Travel & Charge Kit stores and charges the headset.
CHARGING
Dock the headset and plug
the dock into a power supply
using the micro-USB cable.
Note: It takes 2 hours to fully
charge the headset.
6