Jabra Engage 75 Mono User manual

Jabra Engage 75 Mono
How do I connect my Jabra Engage to a desk phone that has a
headset port?
This type of desk phone has a dedicated headset port. These phones
typically have a button on the front panel for switching between the desk
phone handset and the headset.
1. Plug the phone cable supplied into the port on the base, and into
the headset port on the desk phone.
2. Plug the base into a power supply using the supplied AC adapter.
3. For Jabra Engage 65, the initial setup is complete.
For Jabra Engage 75 with touch screen, select a language on the base
and then start the setup wizard.
Jabra Engage 65
To make additional adjustments to the desk phone, see the controls
located at the bottom of the base. You can adjust the microphone
transmit level by pressing the or button to increase or decrease the
21/11/2023 20:16
https://www.jabra.co.uk/supportpages/jabra-engage-75/9556-583-
117/faq/d4501288-ad95-4a30-9690-093368d3f94a
Page 1 of 2

volume. You can enable the audio gateway to and from the desk phone by
using the dial tone switch.
Jabra Engage 75 with touch-screen display
To make additional adjustments to the desk phone, such as adjusting the
microphone transmit volume, go to the relevant section in the settings
menu. To adjust the microphone transmit level for the desk phone, tap
to open the settings menu. Tap or to increase or decrease the transmit
volume, and then tap to save the setting.
21/11/2023 20:16
https://www.jabra.co.uk/supportpages/jabra-engage-75/9556-583-
117/faq/d4501288-ad95-4a30-9690-093368d3f94a
Page 2 of 2