Jabra Engage 65 User manual

Jabra Engage 65 Stereo
How do I connect my Jabra Engage to my Alcatel IP Touch
4029 or 4039 desk phone so I have remote call control using
my headset?
Prerequisite
Jabra Link 14201-36 Electronic Hook Switch (EHS) cable
To connect your headset:
1. For the 2-sided cable end:
a. Plug the (wide) RJ45 connector (red band) into the red socket
marked AUX on the Jabra base.
b. Plug the (small) RJ10 connector (blue band) into the socket
marked with the blue phone icon on the Jabra base.
2. For the 2-fold Y coupling end:
a. Plug the 3.5mm phone connector into the headset interface.
b. Plug the RJ12 phone connector plug into the socket marked with a
bell on the phone.
c. Plug the phone cable for the phone directly into the additional
connection socket of the Y-cable.
To configure your headset when connecting to a desk phone for the first
time:
For Jabra Engage 75, follow the onscreen setup wizard on the base.
For Jabra Engage 65, the initial setup is complete after connecting
the cables.
04/01/2024 00:48
https://www.mea.jabra.com/supportpages/jabra-engage-65/9559-553-
111/faq/edf55d16-cdea-44ed-bf29-32c2d022ddf4
Page 1 of 3

See the user manual located in the Technical Documents section for
more details about setting up the desk phone.
To learn more about your Jabra product, use Jabra Direct, the computer
application that is available free of charge. Use Jabra Direct to adjust
features and functions according to personal preferences or company
requirements. Also ensure your Jabra product is updated to get the
latest performance. Visit jabra.com/direct for more information.
Note:
Additional setup information for your Jabra products:
EHS cable/adapter type: MSH.
Clear dial tone switch: set to position “A”.
We recommend setting the microphone volume to "7" out of 13.
Phone settings with device software version 9.xx and later:
Phone settings are no longer required. When the phone connector has
been adapted correctly, a headset icon should appear in the phone
display. If the headset icon does not appear, check the following
settings: Menu>Settings>Phone>Phone connector>Activate/select
headset.
Phone settings with device software earlier than version 9.xx:
Note that the “Force Headset” function must not be activated on the
device as this will prevent you from accepting external calls.
Menu>Settings>Phone>Phone connector>Force headset "OFF"
Menu>Settings>Phone>Socket>Activate headset
Ringtone signal/phone settings:
The ringtone signal on the headset is only transferred if one of the
following ringtones has been selected: "Standard", "Classic", "Cold
River", "Dooing-Dooing". Navigate to the menu:
04/01/2024 00:48
https://www.mea.jabra.com/supportpages/jabra-engage-65/9559-553-
111/faq/edf55d16-cdea-44ed-bf29-32c2d022ddf4
Page 2 of 3

Menu>Settings>Ringtone>Internal/External
If you have set the correct ringtone and you still do not have a ringtone
signal, check the following settings:
Menu>Settings>Phone>Internal/External>additional options.
The options "No tone", "Progressive", "Beeps" must be set to “OFF”.
To connect/transfer calls using the headset:
1. Dial the phone number. “Transfer” appears on the phone display.
2. Press the associated function button next to the phone display.
3. End the conversation using the button marked “Headset”.
04/01/2024 00:48
https://www.mea.jabra.com/supportpages/jabra-engage-65/9559-553-
111/faq/edf55d16-cdea-44ed-bf29-32c2d022ddf4
Page 3 of 3