Jabra 100-94100000-02 - BT4010 - Headset User manual

USER MANUAL
BT4010

1
english
JABRA BT4010
english
THANK YOU....................................................2
ABOUT YOUR JABRA BT4010 ...................................2
WHAT YOUR HEADSET CAN DO ................................3
USING YOUR JABRA BT4010 ....................................4
HOW THE DISPLAY WORKS .....................................4
WEARING STYLE ...............................................6
HOW TO .......................................................7
TROUBLESHOOTING & FAQ ....................................8
NEED MORE HELP?.............................................9
TAKING CARE OF YOUR HEADSET ..............................9
WARNING! .....................................................9
WARRANTY ...................................................12
CERTIFICATION ...............................................14
GLOSSARY ....................................................15

2
english
JABRA BT4010
Thank you
Thank you for purchasing the Jabra BT4010 Bluetooth® headset.
We hope you enjoy it! This instruction manual will get you started
and ready to make the most of your headset.
abouT your Jabra bT4010
PLEASE NOTE: Before using your new Jabra BT4010 headset,
you must fully charge it and set it up by ‘paring it’ with your
selected Bluetooth device.
1 LCD display
With battery, Bluetooth and call indicator
2 Answer/End button
Press and hold to turn the headset on and o
Tap to answer/end a call
3 Charger socket
4 Volume up/Volume down
5 Earhook
5
1
2
4
3

3
english
JABRA BT4010
WhaT your headseT can do
Your Jabra BT4010 lets you do all this:
- Answer calls
- End calls
- Reject calls*
- Voice dialing*
- Last number redialing*
- Call waiting*
- Put call on hold*
LCD Display
- Battery status
- Bluetooth connection status
- Call status
Specications
- Talk time up to 6 hours/standby time up to 150 hours
- Rechargeable battery with charging option from AC power
supply. Alternative charger options PC via USB cable or car
charger (not included)
- LCD display for status and battery indicator
- Size: L 49 mm x W 17 mm x d 27,9 mm
- Weight 10 grams
- Qualied for bluetooth specication version 2.0 + EDR
(enhanced data rate), supporting headset and hands-free
proles for phone conversations
- E-SCO for enhanced audio quality
- 28 bit encryption
- Operating range up to 10 meters (approx. 33 feet)
* Phone dependent

4
english
JABRA BT4010
using your Jabra bT4010
The Jabra BT4010 is easy to operate. The answer/end button on
the headset performs dierent functions depending on how long
you press it.
Instruction Duration of press
Tap Press briey
Double tap 2 quickly repeated taps
Press Approx: 1 seconds
Press and hold Approx: More than 3 seconds
hoW The display Works
Less than 10 min.
talk time
Headset on,
battery
status shown
No battery
indicator:
Headset o
In pairing mode
Connected to
phone
No bluetooth icon:
Not connected to
phone
Incoming or
outgoing call Current call
No call indicator:
No call
Bluetooth Indicator
Battery Icon Call Indicator

5
english
JABRA BT4010
1. Charge your headset
Make sure that your Jabra BT4010 headset is fully charged before
you start using it. Use the AC adaptor to charge from a power
socket. Your headset indicates the charging level while charging:
What you see What you see
1st battery level ashing Less than 30%
2nd battery level ashing Between 30 - 70%
3rd battery level ashing More than 70%
All battery levels on, no
ashing
Fully charged
Please note: The lifetime of the battery will be signicantly
reduced if your device is left uncharged for a long period. We
therefore recommend that you recharge your device at least once
a month.
Turning your headset on and o
- Press and hold the answer / end button to turn on your
headset. The LCD display will show the battery status to
indicate the headset is on.
- Press and hold the answer / end button to turn o your
headset until you see the indicator turn o in the LCD display.
Pairing the headset with your phone
Before you use your Jabra BT4010, you need to pair it with your
mobile phone.
1. Your headset will automatically go into pairing mode when you
turn it on the rst time, and you will see the Bluetooth indicator
ashing in the LCD display.
2. Set your Bluetooth phone to‘discover’ the Jabra BT4010.
Follow your phone’s instruction guide. This usually involves
going to a ‘setup,’‘ connect’ or‘Bluetooth’ menu on your phone
and selecting the option to ‘discover’ or ‘add’ a Bluetooth
device.*

6
english
JABRA BT4010
3. Your phone will nd the Jabra BT4010.
Your phone then asks if you want to pair with it. Accept by
pressing ‘Yes’ or ‘OK’on the phone and conrm with the
passkey or PIN = 0000 (4 zeros). Your phone will conrm when
pairing is complete.
In case of unsuccessful pairing, repeat steps 1 to 3.
Manual pairing
You can manually put your Jabra BT4010 into pairing mode, if you
want to pair with a second phone or Bluetooth device:
1. Make sure the headset is o.
2. Press and hold the answer / end button for approx 5 sec. until
the Bluetooth indicator on the LCD display starts ashing.
3. Set your Bluetooth phone to discover your headset as
described above.
Wearing sTyle
The Jabra BT4010 ready to be worn without an earhook – simply
insert it into your right or left ear with the headset pointing
towards your mouth. If you prefer to use the earhook, click it on as
shown in the illustration.
For optimal performance, wear the Jabra BT4010 and your mobile
phone on the same side of your body or within line of sight .
In general, you will get better performance when there are no
obstructions between your headset and your mobile phone.

7
english
JABRA BT4010
hoW To
Answer a call
- Tap the answer/end button on your headset to answer a call.
End a call
- Tap the answer/end button to end an active call.
Make a call
- When you make a call from your mobile phone, the call will
(subject to phone settings) automatically transfer to your
headset. If your phone does not allow this feature, tap on the
Jabra BT4010’s answer/end button to transfer the call to the
headset.
Reject a call *
- Press the answer/end button when the phone rings to reject an
incoming call. Depending on your phone settings, the person
who called you will either be forwarded to your voice mail or
you will hear a busy signal.
Activate voice dialing*
- Press the answer/end button. For best results, record the voice-
dialing tag through your headset. Please consult your phone’s
user manual for more information about using this feature.
Redial last number *
- Double tap the answer/end button when the headset is on and
not used.
Adjust sound and volume *
- Tap the volume up or down to adjust the volume.
Call waiting and placing a call on hold*
This lets you put a call on hold during a conversation and answer
a waiting call.
- Press the answer/end button once to put the active call on hold
and answer the waiting call.
- Press the answer/end button to switch between the two calls.
- Tap the answer/end button to end the active conversation.
* Phone dependent

8
english
JABRA BT4010
Battery Indicator
When the Jabra BT4010 is turned on, you will always know the
battery level from the LCD display.
What you see Battery level/Talk time
3 Battery levels Between 4-6 hours talk time
2 Battery levels Between 2-4 hours talk time
1 Battery levels Less than 2 hours talk time
TroubleshooTing & FaQ
I hear crackling noises
- Bluetooth is a radio technology, which means it is sensitive to
objects between the headset and the connected device. It is
designed for the headset and the connected device to be used
within 33 feet (10 meters) of each other, with no major objects
in the way (walls, etc.).
I cannot hear anything in my headset
- Increase the volume in the headset
- Ensure that the headset is paired to a device that is playing
- Make sure your phone is connected to the headset by checking
the LCD display to see if the Bluetooth indicator is on. You can
connect to the headset by tapping the answer/end button.
I am having pairing problems
- You may have deleted your headset pairing connection in your
mobile phone.
Follow the pairing instructions.
Will the Jabra BT4010 work with other Bluetooth equipment?
- The Jabra BT4010 is designed to work with Bluetooth mobile
phones. It can also work with other Bluetooth devices that are
compliant with Bluetooth version 1.1 or higher and support a
headset and/or hands-free prole.

9
english
JABRA BT4010
I cannot use Reject call, call on hold, Redial or voice dialling
These features are dependent on the ability of your phone to
support a hands-free prole. Even if the handsfree prole is
implemented reject call, call hold and voice dialing are optional
features which are not supported by all devices. Please consult
your device manual for details.
The device is not connected to my headset in time to answer
an incoming call
If the headset is o and is turned on when a call is incoming, the
device and headset might not connect in time for the call to be
answered. In order to avoid such inconveniences please keep the
headset on, in range and connected.
need more help?
1. Web: www.jabra.com
(for the latest support info and online User Manuals)
2. E-mail:
[e-mail]
Information: [e-mail]
3. Phone:
0800 0327026
Taking care oF your headseT
- Always store the Jabra BT4010 with the power o and safely
protected
- Avoid storage at extreme temperatures (above 45°C/113°F –
including direct sunlight – or below -10°C/14°F). This can
shorten battery life and may aect operation. High temperatures
may also degrade performance.
- Do not expose the Jabra BT4010 to rain or other liquids.
Warning!
EXCESSIVE VOLUME LEVELS CAN CAUSE PERMANENT
HEARING DAMAGE. USE AS LOW A VOLUME AS POSSIBLE.
Headsets are capable of delivering sounds at loud volumes and
high pitched tones which under certain circumstances can result
in permanent hearing loss damage. Avoid prolonged use of the
headset at excessive sound pressure levels. Please read the safety
guidelines below prior to using this headset.