Jabra Engage 75 User manual

Jabra Engage 75 Stereo
How do I connect my Jabra wireless headset with the Jabra
Link 14201-40 to my supported Panasonic desk phone so I
have remote call control using my headset?
Connection:
1. Connect the AC adapter that is supplied with the headset to the
headset base. Connect the other end to an electrical outlet.
2. Unplug the Panasonic handset cord from the desk phone base.
3. Connect the Panasonic handset cord to the headset base socket
marked with a handset icon.
4. Connect the modular plug cable that is supplied with the headset to
the handset interface on your Panasonic phone. Connect the end
with the blue band to the headset base socket that is marked with a
phone icon.
5. Connect the Jabra Link 14201-40 EHS cable with the red band to the
AUX interface on the headset base. Connect the 3.5mm plug in the
EHS interface on the Panasonic phone.
Configuration:
1. Follow the setup instructions for your Jabra wireless headset. If the
02/03/2024 07:22
https://www.jabra.com/supportpages/jabra-engage-75/9559-583-125/faq/311d504e-
e776-48f5-b882-6f384e6d7838
Page 1 of 2

headset base requires manual configuration, set the Electronic Hook
Switch setting to “IQ” and set the dial tone switch to position “A”.
2. Make a call to the headset. If the volume of your voice is too loud or
quiet to the person you are calling, adjust the headset microphone
volume until you achieve the optimum level.
02/03/2024 07:22
https://www.jabra.com/supportpages/jabra-engage-75/9559-583-125/faq/311d504e-
e776-48f5-b882-6f384e6d7838
Page 2 of 2