Jabra BT2010 - ANNEXE 746 User manual

USER MANUAL

1
ENgLiSh
JABRA BT2010 BLUETOOTH HEADSET
ENgLiSh
THANKYOU....................................................2
ABOUT YOUR JABRA BT2010...................................2
WHAT YOUR NEW HEADSET CAN DO...........................3
GETTING STARTED..............................................3
CHARGE YOUR HEADSET.......................................4
TURNING YOUR HEADSET ON AND OFF . . . . . . . . . . . . . . . . . . . . . . . . 5
PAIRING IT WITH YOUR PHONE .................................5
WEAR IT HOW YOU LIKE IT .....................................7
HOW TO .......................................................8
WHAT THE LIGHTS MEAN ......................................9
TROUBLESHOOTING ..........................................10
NEED MORE HELP?............................................11
TAKING CARE OF YOUR HEADSET .............................11
PROTECT YOUR HEARING .....................................11
WARRANTY . ..................................................13
CERTIFICATION AND SAFETY APPROVALS.....................15
GLOSSARY ....................................................17

2
ENgLiSh
JABRA BT2010 BLUETOOTH HEADSET
ThANk yoU
Thank you for purchasing the Jabra BT2010 Bluetooth® headset.
We hope you enjoy it! This instruction manual will get you started
and ready to make the most of your headset.
AboUT yoUR JAbRA bT2010
1
Volume up
4
Charging socket
2
Volume down
5
Optional earhook
3
Light indicater (LED)
Answer/end button
O/on button
Fig. 1

3
ENgLiSh
JABRA BT2010 BLUETOOTH HEADSET
WhAT yoUR hEAdSET cAN do
Your Jabra BT2010 lets you do all this:
• Answer calls
• End calls
• Adjust volume level
• Reject calls*
• Voice dialing*
• Last number redialing*
• Call waiting*
• Place call on hold*
* Phone dependent
Specications
• Talk time up to 7hours / standby time up to 200 hours
• Rechargeable battery with charging option from AC power
supply, USB cable or car charger (USB cable and car charger not
included)
• Weight 2/5 oz (11 grams)
• Operating range up to approx. 33 feet (10 meters)
• Headset and hands-free Bluetooth proles (see glossary)
• Bluetooth version 2.0, EDR and eSCO
gETTiNg STARTEd
You should follow three steps before using your headset
1. Charge your headset
2. Activate Bluetooth on your mobile phone (refer to the
manual for your Mobile phone)
3. Pair your headset to your mobile phone

4
ENgLiSh
JABRA BT2010 BLUETOOTH HEADSET
The Jabra BT2010 is easy to operate. The answer/end button on
the headset performs dierent functions depending on how long
you press it.
Instruction: Duration of press:
Tap Press briey
Press Approx: 1 second
Press and hold Approx: 5 seconds
chARgE yoUR hEAdSET
Make sure that your headset is fully charged for two hours before
you start using it. Use the AC power supply to charge from a
power socket. When the light indicator (LED) has a solid LED light,
your headset is charging. When the solid LED light turns o, it is
fully charged. (See g. 2)
Fig. 2
1 2
Use only the charger provided in the box - do not user chargers
from any other devices as this may damage your headset.

5
ENgLiSh
JABRA BT2010 BLUETOOTH HEADSET
Please note: The lifetime of the battery will be signicantly
reduced if your device is left uncharged for a long period.
We therefore recommend that you recharge your device at
least once a month.
TURNiNg yoUR hEAdSET oN ANd off
• Press the answer/end button until you see a burst of ashes on
the indicator light (LED) to turn your headset on.
• Press and hold the answer/end button until you see a burst of
ashes on the indicator light (LED) to turn the headset o.
Please note that the LED indicator light turns o after 1 minute to
save battery. Headset is still active, and light will ash again after
tap on the answer/End button or any call activity. To check if the
headset is on, tap the answer/end button once – the LED indicator
light will ash, if the headset is on.
PAiRiNg iT WiTh yoUR PhoNE
Headsets are connected to phones using a procedure called‘pair-
ing’. By following a few simple steps, a phone can be paired with a
headset in a matter of minutes. (See g. 3)
1. Put the headset in pairing mode
• When you turn on your Jabra BT2010 for the rst time, the
headset will automatically start up on pairing mode – i.e. it is
discoverable for your phone. When the headset is in pairing
mode the LED is constantly lit.
2. Set your Bluetooth phone to‘discover’ the Jabra BT2010
• Follow your phone’s instruction guide. First make sure that
Bluetooth is activated on your mobile phone. Then set your
phone to discover the headset. This usually involves going to a
‘setup,’‘connect’or‘Bluetooth’ menu on your phone and select-
ing the option to‘discover’or‘add’a Bluetooth device.*

6
ENgLiSh
JABRA BT2010 BLUETOOTH HEADSET
3. Your phone will nd the Jabra BT2010
• Your phone will nd the headset under name“Bluetooth head-
set”. Your phone then asks if you want to pair with the headset.
Accept by pressing‘Yes’or‘OK’on the phone and conrm with
the passkey or PIN = 0000 (zeros). Your phone will conrm
when pairing is complete.
Fig. 3
1 2
In case of unsuccessful pairing, put the Jabra BT2010 into pairing
mode manually. Make sure the headset is o. Press and hold the
answer/end button for approximately 5 seconds until the LED has
a constant light.The LED will ash before the light is constant –
keep holding down the button until light is constant.
3 4
* Phone dependent

7
ENgLiSh
JABRA BT2010 BLUETOOTH HEADSET
WEAR iT hoW yoU LikE iT
The Jabra BT2010 is ready to wear without an earhook – simply
insert it in your right or left ear. If you prefer to use the earhook,
click it on as shown on the illustration. (See g. 4)
Fig. 4
For optimal performance, wear the Jabra BT2010 and your mobile
phone on the same side of your body or within line of sight. In
general, you will get better performance when there are no ob-
structions between your headset and your mobile phone.
(See g. 5)
Fig. 5

8
ENgLiSh
JABRA BT2010 BLUETOOTH HEADSET
hoW To…
Answer a call
• Tap the answer/end button on your headset to answer a call.
End a call
• Tap the answer/end button to end an active call.
Make a call
• When you make a call from your mobile phone, the call will
(subject to phone settings) automatically transfer to your
headset. If your phone does not support this function, tap on
the answer/end button on the Jabra BT2010 to receive the call
in the headset.
Reject a call*
• Press the answer/end button when the phone rings to reject an
in-coming call. Depending on your phone settings, the person
who called you will either be forwarded to your voice mail or
hear a busy signal.
Activate voice dialing*
• Press the answer/end button. For best results, record the
voice-dialling tag through your headset if your phone allows
you to do so. Please consult your phone’s user manual for more
information about using this feature.
Redial last number*
• Double tap the answer/end button.
Adjust sound and volume
• Press the volume up or down (+ or -) to adjust the volume.
Mute/Unmute
• Press the volume up and down (+ or -) at the same time to
mute the call (the caller will not hear your voice. To un-mute,
press either the volume up or volume down button.

9
ENgLiSh
JABRA BT2010 BLUETOOTH HEADSET
Call waiting and placing a call on hold*
This lets you put a call on hold during a conversation and answer
a waiting call.
• Press the answer/end button once to put the active call on hold
and answer the waiting call.
• Press the answer/end button to switch between the two calls.
• Tap the answer/end button to end the active conversation.
* Functions marked with * are dependent on your phone support-
ing these features. Check your phone’s user manual for further
information.
WhAT ThE LighTS MEAN
What you see What this means about your
headset
Solid light: In pairing mode – see Pairing
section
Slow single ash: Connected to phone and in
standby mode*
Slow double ash: Not connected to phone and
standby mode*
Quick single ash: Active on call
Quick double ash: Incoming/Outgoing call
Triple ash: Battery low
* BT2010 is equipped with Jabra Discreet Light feature, meaning
that light indicator (LED) turns o after 1 min of non-activity.
Headset is still active, and light will ash again after a tap on the
answer/end button or any call activity.