Jabra Talk 65 User manual

User manual
Jabra
Talk 65

4
ENGLISH
1. Welcome
Thank you for using the Jabra Talk 65. We hope
you will enjoy it!
Jabra Talk 65 features
• 80% noise cancellation with 2 microphones
• All-day calls with up to 14 hours talk time
• Outstanding fit & comfort
• Up to 300 feet/100 meters wireless range
• Protection against dust and water (IP54
rated)
• Media streaming & voice assistant access

5
ENGLISH
2. Jabra Talk 65
overview
*Device dependent
Power on/o (hold)
Volume up
Volume down
Microphone
Charging port
Answer/end call
Reject call (hold)
Voice assistant*
Mute microphone
2.1 Included accessories
USB cable
EarGels
Small Medium Large

6
ENGLISH
3. How to wear
The headset can be worn on the left or right ear.
Right Left
To wear the headset on the other ear, rotate
the microphone horizontally to the other side.
Then swivel the microphone up and over and
point it towards your mouth.

7
ENGLISH
3.1 Selecting an EarGel
It is important to wear the headset with the
most comfortable EarGel size for your ears.
This will ensure the best audio experience.
Small Medium Large
3.2 How to get the perfect fit
For the best audio quality and comfort, the
eargel should fit firmly in your ear, but should
not be squeezed into your ear canal.

8
ENGLISH
4. How to charge
To charge the headset, connect the USB
charging cable to the headset’s USB charging
port. It is recommended to charge the headset
using the supplied charging cable. It takes up
to 150 minutes to fully charge the battery.

9
ENGLISH
While charging, the LED indicator shows the
charging status. Red indicates the headset is
charging. Blue indicates the headset is fully
charged.
Charging Fully charged

10
ENGLISH
5. How to connect
5.1 Power on
Press and hold the Multi-function button for 1
second until the LED flashes blue and you hear
“Power on”.
Power
on
1 sec
5.2 Power o
Press and hold the Multi-function button for 3
seconds until the LED flashes red and you hear
“Power off ”.
Power
o
3 sec

11
ENGLISH
5.3 Pair to your smartphone
1. Ensure the headset is powered off.
2. Press and hold the Multi-function button for
approx. 6 seconds until you hear “Pair mode”
and the LED flashes red and blue. The
headset is now ready to pair.
3. Go to the Bluetooth menu on your
smartphone and select the Talk 65 from the
list of available devices.
1 2
Pair
mode
6 sec

12
ENGLISH
5.4 Connect to your smartphone using
NFC
1. Ensure your headset is powered on, and that
NFC is enabled on your smartphone.
2. Place the NFC zone of your smartphone
against the NFC zone of the headset until
your smartphone confirms the connection.
Please note that not all phones support NFC
pairing.
NFC Zone