James 9050 Touch User manual

User Manual
Large stainless steel tank Tank capacity 7.5 L / 2.0 gallon;
Tank size 33.1 x 23.8 x 10.5 cm / 13.0” x 9.4” x 4.1”
Touch Screen Control Panel Glass top panel with capacitive sensing technology. Durable,
reliable, resistant to water and harch chemicals
Drainage valve Convenient to use
3 x industrial grade Uniform distribution of ultrasonic waves,
ultrasonic transducers strong cleaning, high durability
3 x ceramic heaters Mounted underneath the bottom of the tank for safe
and even heating; more durability construction
3 x colour LED display Easy to operate, with 4 key control panel,
6 timer settings, 3 temperature settings
Independent control circuit 40% higher eciency, not susceptible to
for each ultrasonic transducer interference, more durable
Multiple circuit protectors When overloaded or improperly used, the protectors
shut down the power to certain areas to protect the machine
Moisture-proofed PCB with Capable for dierent working environments with better
industrial IC anti-interference performance
3 x cooling fans Two for cooling of PCB boards, one for cooling of ultrasonic
transducers. Improve heat dissipation and beneficial for
continuous operations
Solid and advanced structural 4.5mm thick wall housing made from engineering grade plastic
design with tongue and groove design for better water-proof and drop-
proof performances. 60% quieter than steel housing designs.
Features
Professional Ultrasonic Cleaner
15/05/114-V1

SAMPLE APPLICATIONS
JEWELLERY
Necklaces, rings,
earrings, bracelets, etc.
MEDICAL / DENTAL
Surgical instruments,
pliers, handpieces, etc.
PERSONAL ITEMS
Shaver heads, hairdressing
scissors & combs, etc.
PRECISION PARTS
Bearings, gears, valves,
tools, fuel injectors, etc.
BABY ITEMS
Toys, baby items,
speech therapy tools, etc.
SILVER, COPPER OR BRASS
Silverware, silver, copper or
brass decorations, etc.
LAB ITEMS
Test tubes, beakers,
flasks, etc.
PCB, INKJET CARTRIDGES
PCBs from mobile phones
and MP4, ink cartridges, etc.
BRASS, GUN PARTS
Reusable brass, gun parts, etc.
GOLF CLUBS
Golf clubs and golf balls
CRYSTALS
Crystals
ELECTRICAL PARTS
Terminals for relays
and contactors
2

INTRODUCTION
Use tap water. Special solutions are not necessary in most cases.
Principles of ultrasonic cleaning:
Millions of tiny air bubbles are generated within liquid by high frequency vibration. The air bubbles burst when
in contact with object and dislodge the debris to achieve the cleaning eect.
• Using tap water is sucient. Purified water or distilled water has the same cleaning eect as
regular tap water for ultrasonic cleaning.
• When cleaning silver or copper items where oxidation has darkened the items, special solutions
such as SeaClean2, needs to be added to the water to remove the oxidation.
Main Features
• 7.5 L / 2.0 gallon tank capacity. Tank opening 33.1 x 23.8 x 10.5 cm / 13.0” x 9.4” x 4.1”.
Longest item that can fit inside the tank is 37.0 cm / 14.6”.
• 3 x industrial grade ultrasonic transducers 3 x (55~60)W = (165~180)W,
3 x ceramic heaters 3 x (75~80)W = (225~240)W.
• 3 x colour LED display. 4-key controls, 6 timer settings, 3 temperature settings, simple to operate.
• Control panel with capacitive sensing technology, durable, reliable, resistant to water and harsh chemicals
• Electrical circuit features:
1) Three transducers, each has an independent PCB control. The output power is increased by 40%.
2) Multiple circuit protectors: a) Thermal switch to prevent running dry. If temperature is too high, the switch
cuts o power for approximately 6 minutes then reconnects the power. b) Thermal protector to prevent PCB
from overheating due to overload. c) Timer to prevent heater from running continuously.
• Industrial grade IC. Moisture-proofed PCB. Cooling fan.
• Drainage valve.
Read the Manual First
The manual should be carefully reviewed before starting to use the device.
Warnings should be observed carefully. Please follow the manual for operations.
TABLE OF CONTENTS
Sample Applications ----------------------------------------------------------------------------------------------------- 2
Safety Precautions ----------------------------------------------------------------------------------------------------- 4, 5
Items Not Suitable for Ultrasonic Cleaning ---------------------------------------------------------------------------- 5
Product Detail ------------------------------------------------------------------------------------------------------------ 6
Control Panel and Operations ------------------------------------------------------------------------------------------ 7
Applications ---------------------------------------------------------------------------------------------------------- 8,9
Common Cleaning Methods --------------------------------------------------------------------------------------- 10, 11
Operation Guidelines ----------------------------------------------------------------------------------------------- 12, 13
Care and Maintenance ------------------------------------------------------------------------------------------------- 14
Optional Accessory Usage Guide ------------------------------------------------------------------------------------- 15
Specification ------------------------------------------------------------------------------------------------------------ 16
3

Danger of electrical shock! Do not use while
bathing. Never immerse the device or the power
cord in water or other liquid.
Danger of electrical shock! Never touch the power
plug with wet hands, especially when inserting or
removing the plug.
Danger of electrical shock! If the unit has fallen into
water during operation, do not touch the unit. Remove
the power plug from the socket first.
Danger of electrical shock! Do not spray water or
liquid over the device.
• Never operate the device unattended.
• Follow the manual to operate the device.
• Do not use components unapproved by the
manufacturer.
• When removing the power cord from the socket, grab
the power plug not the cord.
• To protect the power cord from damage, do not cause it
to get caught by things such as cupboard door or a chair
leg; do not drag across a hot surface.
• If there is damage to the power plug, cord, housing, or
other parts of the device, do not use the device.
• Do not disassemble the device, except by professionals.
• If the unit is damaged, non-operational or has fallen into
water, take it to a qualified service provider.
• Remove the power plug from the socket:
-if malfunction occurs
-before cleaning the device
-if the device is not being used for prolonged period
-after each use (recommended)
• The installation of an earth leakage circuit breaker
with a rated tripping current of no more than 30 mA
provides further protection against an electrical shock.
The installation should only be carried out by a trained
electrician.
To prevent fire hazards, please observe the
following:
• Never block the vents on the device. Keep the vents
free from lint, hair and other materials.
• Do not place the device on a soft surface, such as a bed
or a couch, where the vents could be blocked.
• Observe the warnings in all sections.
• If the supply cord is damaged, it must be replaced
by the manufacturer or its service agent or a similarly
qualified person in order to avoid a hazard.
SAFETY PRECAUTIONS
Keep it away from children!
This appliance can be used by children aged from 8 years and above if they have been given
supervision or instruction concerning use of the appliance in a safe way and if they understand
the hazards involved. Cleaning and user maintenance shall not be made by children unless they
are aged 8 years and above and supervised. Keep the appliance and its cord out of reach of
children aged less than 8 years.
• Please store the ultrasonic cleaner where it is inaccessible by children.
• Danger to children! Danger for death through suocation! Keep packaging material away from children.
• This appliance should not be used by children. Keep the appliance and its cord out of reach of children.
To prevent life-threatening electrical shock, please observe the following:
4
Risk of fire and explosion!
• Never use flammable liquids or solvents directly in the
ultrasonic cleaning bath. Alcohol, acids and solvents
should be used in an In-direct tank.
• Ultrasonic activity increases the vaporisation of liquids
and creates a very fine mist which can catch fire.
Caution!
• Avoid any acetone, acid, alcohol, amonia or solvents
from contacting the plastic housing and control panel
to prevent corrosion. Use Indirect Cleaning and a
glass or metal container for using such solutions.
Risk of damage to the ultrasonic tank!
• Do not use any acid cleaning agents (pH value < 7)
directly in the stainless steel tank if the cleaning items
or the contamination of the cleaning items contain
halogenides (fluorides, chlorides or bromides). The
same applies to NaCl solutions.
• The stainless steel tank can be destroyed by crevice
corrosion in a very short time. Substances that cause
crevice corrosion can be contained in household
cleaners.
CAUTION

SAFETY PRECAUTIONS
5
Other observations:
• Do not operate the product without filling the tank with water. Running dry will damage the unit.
• Do not plug in the power cord before adding water to the tank. To avoid overspill, do not fill the tank above
the ‘Max’ line.
• Do not use solution containing abrasive substances or strong corrosive chemical solution not
recommended by the manufacturer or the supplier.
• Place the device on a dry and flat surface for operation.
• When the device is subjected to severe electromagnetic interference, it may malfunction, stop operating or
lose control functions. If this happens, unplug the power cord then re-insert it to restart the device.
IMPORTANT SAFETY INSTRUCTIONS
When using electric appliances, basic precautions should always be followed, including the
following :
• Read all the instructions before using the appliance.
• To reduce the risk of injury, close supervision is necessary when an appliance is used near children.
• Only use attachments recommended or sold by the manufacturer.
• Do not use outdoors.
• To disconnect, turn all controls to the o (O) position, then remove plug from outlet. Do not unplug by pulling
on cord. To unplug, grasp the plug, not the cord. Unplug from outlet when not in use and before servicing
or cleaning.
• To reduce the risk of electrical shock, do not put the appliance in water or other liquid. Do not place or store
appliance where it can fall or be pulled into a tub or sink.
• All servicing of this product, including transducer replacement, is to be conducted by qualified service
personnel.
• Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or is
dropped or damaged in any manner.
• Return appliance to the nearest authorized service facility for examination, repair, or electrical or
mechanical adjustment.
Items Not Suitable for Ultrasonic Cleaning
Soft Jewellery:
Pearls, emerald, ivory, coral, agate,
sea turtle shells, etc
Welded, Plated and Glued Items:
Welded or plated metal items, glued items
Watches:
Others:
Wood; coated glass, ceramic, camera
filters with pre-existing cracks.
These items are not hard, so scratches may occur during cleaning.
Ultrasonic cleaning may enlarge the gaps inside the welded joints,
plated coating or glued items and may cause separation.
Because the strong penetration capability of the ultrasonic waves,
water may get into the watches.
Ultrasonic cleaning may enlarge the cracks pre-existed in the
coating on the glasses, ceramic, and glass. If the items have no
pre-existing cracks, then it is okay.

6
PRODUCT DETAIL
A. Top cover
B. Handles
C. Stainless steel tank
D. Housing
E. Control panel
F. Drainage pipe fitting
G. Drainage valve handle
H. Cover holder
I. Power switch
J. Power socket
A
B
C
D
E
F
G
H
I
J
HosePower Cord
INCLUDED ACCESSORIES
OPTIONAL ACCESSORIES
Indirect cleaning
tank
Double Beaker and
beaker holder
Stainless steel
rack and tray
Suspendible Basket

7
CONTROL PANEL AND OPERATIONS
1. – Working Time Display. It counts down after work has started.
2. – Multistage Thermometer. Solid green light indicates that the water temperature is
0-30% of the set temperature. Solid orange light indicates that the water temperature is 30-60%
of the set temperature. Solid red light indicates that the water temperature is 60-90% of the set
temperature. Flashing red light indicates that the water temperature is close to the set temperature.
All lights on, indicate that the water temperature is at the set temperature (90-100%).
3. – Set Temperature Display. Press Temp button to select one of the 3 set temperatures.
50°C or 122°F 55°C or 131°F 60°C or 140°F
4. – °C or °F Indicator.
°C - Set temperature in °C. – ° F - Set temperature in °F.
5. – Overheat protection warning light. If the unit is working improperly or has been running for too
long, the red warning light will illuminate, indicating that the unit is in overheat protection mode.
The unit can not be operated until it has been left to stand (~15 to 20 mins) to cool down. The warning light
then turns o and the operation can be resumed.
6. – Heater Status. Press Heater button, flashes, indicating the heater is turned on. Press Heater
button again, dims, indicating the heater is turned o.
7. – Normal Cleaning Status. – Illuminated, normal cleaning is underway.
8. Heater Button. Pressing heater button, flashes, indicating that the heater is turned on.
To cancel heating, press heater button twice again, dims, indicating the heater is turned o.
9. Temperature Set Button. 3 set temperatures (°C/°F) can be selected. Press Temp button to select one of
the 3 set temperatures.
50°C or 122°F 55°C or 131°F 60°C or 140°F
10. Function Button. After powering on, the LED displays which is the default time (as
shown), and the unit is ready for normal working status. Press On/O button twice and the
cleaning starts. The cleaning stops when the timer counts down to . If the unit needs to
be stopped before the timer runs out, press On/O button twice.
11. Timer Quick Set Button. Press Timer button, LED display shows . Each pressing increases the
time by 5 minutes.
When the water reaches the set temperature, the heater will turn o automatically.
To prevent accidentally turning on or o the heater, the Heater button needs to be touched twice
within 6 seconds to turn it on or o. flashes, indicating the heater is on.
To prevent accidentally turning the unit on or o, the On/O button needs to be touched twice
within 6 seconds to turn it on or o. flashes, indicaes that the unit is running in Normal Cleaning mode.

8
APPLICATIONS
1. Metal Processing Manufacturers and Jewellery Makers:
- Ultrasonic cleaning can remove grease or abrasive powder from work-in-
process metal items and keep them clean.
- Jewellery made with investment casting often has wax layer in addition to
debris. Turning on the heater will raise the water temperature, melt the wax
and improve the cleaning.
2. Biology, Chemical Laboratories:
Labs can use ultrasonic cleaners to clean test tubes and other glass or metal
containers to remove residual chemicals and debris that can aect the
accuracy of the test results.
3. Medical Instrument Disinfection Rooms:
Non-disposable medical instruments may have blood or organic tissues
left after use. They need to be removed with ultrasonic cleaners before
disinfection.
4. Dental Clinics:
Dental clinics can use ultrasonic cleaners to clean dental instruments and to
remove blood and small particles left on the instruments before disinfection.
5. Electrical Component Manufacturers:
Terminals on AC contactors and relays need to be kept clean to prevent
sparking and non-contact. Ultrasonic cleaning is the most eective method to
keep these parts cleaning.
6. Shooting Clubs
To reuse brass cartridges: Adding special solution such as SeaClean2
solution can make fired brass casings useable and like new again.
Gun cleaning and care: Cleaning guns after shooting is time consuming.
Using SeaClean2 solution in the water and using ultrasonic cleaners can
complete the cleaning better, quicker and easier than traditional methods.

9
7. Special Education Institutes / Kindergartens:
Speech therapy tools or small toys that are reused need to be cleaned to
prevent the growth and spread of bacteria. Ultrasonic cleaning can perform
thorough cleaning by removing debris hidden inside small holes and
crevices before disinfection.
8. Golf Clubs:
Cleaning the heads of golf clubs is a time consuming job. Using
ultrasonic cleaning with the Enhanced Cleaning method can improve the
eectiveness and eciency.
9. Mobile Phone and Electronics Service Shops
PCB renewal: Non-operational electronics, after falling into water, or
non-operational key pads can be cleaned with ultrasonic cleaners and
pure alcohol to recover the functions. Use the Indirect Cleaning method for
small-sized PCBs.
10. Printing Shops
Unblocking dried printer heads or ink cartridges: Large printers and inkjet
printers often have dried printer heads or ink cartridge ports. Replacing
them with new ones is very costly. Adding acetone or SeaClean2 and using
an ultrasonic cleaner with a couple of minutes of cleaning will remove the
blockage and make them usable again.
Avoid acetone from contacting the plastic housing to prevent
corrosion. Use Indirect Cleaning explained later and a glass or
metal container for acetone.
11. Automotive Repair Shops:
The Enhanced Cleaning method can be used to clean precision parts such
as valves, injectors, gears and bearings. It cleans out debris in tiny holes
and crevices eectively.
APPLICATIONS

9
Selection of container: (Adding a container to the tank will reduce the cleaning eect by the following)
Container Type: Plastic Aluminium Glass Stainless Steel
Ultrasonic energy absorption: 30-40% 20% 15% 8%
Put the items in a separate container. Use ultrasonic waves
to penetrate the container to do the cleaning.
Suitable Locations: medical instrument sterilization rooms,
watch and precision parts manufacturers, mobile phone
and electronics service shops, large printing shops.
Dierent industries use dierent fluids inside the container:
1. Watch service shops - Watch oil (to prevent rust)
2. Medical instrument sterilization - Enzymatic solution
(cleaning prior to sterilization)
3. Precision electrical parts - Hexane (to dissolve grease, to
evaporate quickly)
4. Mobile phone and electronic service shops - Pure alcohol
(to evaporate quickly).
5. Printing shops – Acetone is often used (to dissolve ink)
Cleaning Method:
1. Put the item inside a container. Add proper fluid to submerge the area to be cleaned.
2. Place the container in the tank directly. Add water to a level between “MIN” and “MAX”, do not overflow.
3. Turn the power switch on. Press Time button to set the timer to 10 minutes. Press On/O button to start
cleaning. Ultrasonic waves will penetrate the container and clean the items.
10
INDIRECT CLEANING
Avoid any acetone, acid, alcohol, amonia or solvents from contacting the plastic housing and control
panel to prevent corrosion. Use Indirect Cleaning and a glass or metal container for using such solutions.
COMMON CLEANING METHODS
Only tap water is needed.
Suitable Locations:
Jewellery makers, biology / chemical labs, homes, speech
therapy clinics, dental clinics, automotive repair shops.
Cleaning Method:
1. Put the items to be cleaned inside the basket and put the
basket inside the tank.
2. Add water to the cleaning tank to a level between
“MIN” and “MAX” lines and above the area to be cleaned.
3. Turn the power switch on. Press Time button to set the
timer to 5 - 10 minutes. Press On/O button to start cleaning.
Notes on using the basket:
1. The basket reduces the friction between the items and the tank. Stainless steel tray absorbs
approximately 8% of ultrasonic energy and a plastic basket absorbs about 35% of ultrasonic energy.
This significantly reduces the cleaning eectiveness.
2. During cleaning, dirt will come o like smoke and the water will become murky over time.
When “smoke” stops coming, the cleaning is basically done.
REGULAR CLEANING

Debris accumulated over a long period of time, greasy or
heavily soiled.
Suitable Locations: metal processing and jewellery makers,
hardware manufacturers, shooting clubs, automotive repair
shops.
Cleaning Method:
1. Large items can be put in the tank directly. Small items can
be put in the basket, then put in the tank. To avoid rubbing
during cleaning, do not put the items on top of each other.
2. Add water to a level between “MIN” and “MAX” and above
the area to be cleaned.
3. Add 50 ml (3 tablespoons) of washing up liquid.
4. Turn the power switch on. Press Temp button tto set the
water temperature to 55°C (131°F). Press Heater button to turn on the heater, flashes. Close the lid.
LED lights up. When water reaches the set temperature, dims, indicating the heater is turned o.
5. Press Time button to set the timer to 15 minutes. Press On/O button to start cleaning. Grease will dissipate
and appear to be like black smoke in the water.
6. When it stops, open the drainage valve to release the dirty water. Close the valve afterwards.
7. Clean the tank and add fresh water. Wash the items for another 3 minutes to remove the residual debris
and any detergent.
Gold, silver, copper or brass items with oxidation which has
darkened the items will need special cleaning.
Suitable Locations: gold, silver, copper or brass product
manufacturers, shooting clubs.
Cleaning Method: 1. Put the items in the basket and then in
the tank, add water to a level between “MIN” and ”MAX” and
above the area to be cleaned.
2. Add special solution (SeaClean2) that can remove silver
or copper oxidation according to the ratio recommended
(typically 1:10), Use special solutions according to the
instructions for brass cartridges.
3. Turn the power switch on. Press Temp button to set the
water temperature to 50°C (122°F). Press Heater button to turn
on the heater, flashes. Close the lid. LED lights up
indicating the percentage range of the set temperature being
reached. when the water reaches the set temperature,
dims, indicating the heater is turned o.
4. Press Time button to set the timer to 15 minutes.
5. When cleaning is done, remove the basket and the items. Rinse the items with tap water or follow steps 6
and 7 in the Enhanced Cleaning section.
11
ENHANCED CLEANING
Warm water and dishwashing liquid can soften grease and improve cleaning eciency.
SPECAL CLEANING WITH SEACLEAN2
The heater has dual protection. To ensure safety, the heater will turn o automatically after 50 minutes.
During cleaning, debris will come o the items like “smoke”. Water will become murky. This method will
remove silver or copper oxidation and debris in the decorating patterns and crevices and make the
items like new again.

12
OPERATING GUIDELINES
Remove the cover and put it on the cover holder vertically.
Put the items in the basket then put them in the cleaning
tank. Add water to a level between “MIN” and “MAX” and
above the area to be cleaned.
If the unit is turned on without water, ultrasonic
energy will not be absorbed. This model has high
power and once on for over 15 seconds, it may
damage the unit or severely reduce the life of the unit.
Connect the power cord to an outlet and turn the
switch on. LED display shows . This is the
most common timer setting. If the timer needs to
be adjusted, press Time button. Select desired
timesetting by pressing Time button:
10min - 15min - 20min - 25min - 30 min - 5 min
Prolonged cleaning time may result in:
a. Loosening of the screws if used.
b. If items are plated and have existing cracks, the
cracks may become more pronounced.
c. Coatings with pre-existing damages may experience
more peeling.
Press On/O button to start cleaning.
The digital timer will count down to show the remaining
cleaning time. When it displays , the cleaning is done.
To stop cleaning at any time, press On/O button.
The unit is designed with overheating protection.
If the unit has been running for too long, the red warning
light ‘ ’ will illuminate, indicating the unit is in overheat
protection mode. The unit can not be operated until it has
cooled down (~15 to 20 minutes). The ‘ ’ turns o and the
operation can be resumed
1
2
3
During cleaning, buzzing sound can be heard from the
cleaning tank, indicating that the cleaning is underway.
Closing the lid will reduce the noise level.

13
2. When debris “smoke” is no longer visible, cleaning is
done. If additional cleaning is needed, reset the timer
and repeat the steps above.
When cleaning is completed, switch o the power, open the
cover and retrieve the basket and the items.
Connect the drainage hose to the drainage pipe as shown.
Open the drainage valve to drain the dirty water.
Clean and wipe the tank dry.
Close the drainage valve.
5
Select one of the four cleaning methods recommended
earlier.
1. When the heater is needed, press the Temp button to
select one of the 3 preset temperatures. Press Heater
button, flashes, indicating the heater is turned on.
When the water reaches the set temperature, dims,
indicating the heater is turned o.
To ensure safety, the unit is designed with dual
protection. The heater will be turned o automatically
if it has been running for 50 minutes.
4
Thermometer lights up to
indicate the percentage
of the set temperature
reached.
30~60% 90~100%
0~30% 60~90%
Made from a unique formula containing natural products, mixing carefully balanced quantities of seaweed,
coconut oils and fruit extracts to create a powerful cleaning solution.
SeaClean2 will expertly clean tarnished items and assist in the removal of carbon, rust and dirt from most
solid metals*, precious stones* and inkjet cartridges to return them to a shiny condition.
Available in 500ml, 1L, 5L and 25L bottles. * Please refer to our website for exclusions.
DOUBLE STRENGTH CONCENTRATE

CARE AND MAINTENANCE
Do not turn on the unit without water in the tank.
Even though the unit is designed with multiple protections, if it is turned on
for over 30 seconds without water in the tank, it may damage the unit or
severely reduce the life of the unit.
If heating over 3 minutes, it will damage the heater.
This unit is equipped with a thermal cuto. If the cleaning function
is turned on without water in the tank, the temperature will rise
continuously. The thermal cuto will be actuated after approximately
15 minutes respectively to ensure safety. The unit will be disabled until it
is repaired.
Do not run the unit for extended time or continuously.
The unit is designed with overheat protection. If the unit has been running
for 45 minutes, it is recommended to stop the unit for about 20 minutes to
prolong the life of the unit.
Do not keep water in the cleaning tank for a long time.
After cleaning is completed, open the drainage valve to drain the dirty
water. Clean and wipe the tank dry.
Do not spray water over the housing.
Use a towel to wipe the tank and the housing dry.
Do not expose the unit under direct sunshine for a long time.
Keep the unit in a dry, cool and ventilated area.
1
2
3
4
5
14
Avoid any acetone, acid, alcohol, amonia or solvents from
contacting the plastic housing and control panel to prevent
corrosion. Damage to the machine in this manor will void warranty.

15
OPTIONAL ACCESSORY USAGE GUIDE
PLASTIC BASKET
The basket has
foldable handles.
It can be raised and
suspended above
the water to drain.
INDIRECT CLEANING TANK
Place the indirect cleaning tank across the top of the main cleaning tank
as shown. Add water inside the main tank so the water level reaches the
indirect cleaning tank. Add required ‘special’ solution to the indirect cleaning
tank and clean items inside.
Cleaning eciency can reach 90% inside the Indirect Cleaning Tank due to
our technology and quality. It can be used to isolate the cleaning and the
solution from the main cleaning action.
It also reduces the amount of ‘special’ solution needed.
BEAKER AND BEAKER HOLDER - INDIRECT CLEANING
Put the beaker holder and
beaker(s) across the main
cleaning tank as shown.
Add water to the main tank
so the water level reaches the
beaker(s).
Add required solution into the
beaker(s). It can be used to clean
small items such as dental burs,
files and nozzles.
STAINLESS STEEL RACK AND TRAY
The rack can be used to support
cassettes. 2 layers of cassettes
can be used on top of each
other. The tray can be used in
place of the cassette. The tray is
stackable so multiple layers of
trays can be used.

GUARANTEE
Your Ultrasonic Cleaner has been carefully manufactured and 100% tested using high quality assured components.
It is guaranteed against faulty workmanship and materials for a period of 12 months from the date of purchase. In
the unlikely event that a failure should occur, the unit will be repaired or replaced* free of charge when returned,
postage paid, to the address below within the guarantee period. This guarantee DOES NOT include damage or
failure resulting from misuse, damage in transit or failure by the user to comply with the Dos and Don’ts (this list is
not exhaustive). Your statutory rights under common law are in no way aected by this guarantee.
James Products Ltd, Church Close Business Park, Todber, Sturminster Newton, Dorset DT10 1JH, England
Tel: [phone] Fax: [phone] Email: [email protected]
When returning your unit please call our Returns Department on [phone] for a RMA (Returns
Materials Authorisation) number. Please return your unit in its original packaging along with a covering
letter stating when and where you purchased the unit and a description of the problem encountered.
If the unit is within the guarantee period please enclose proof of purchase.
LIMITED WARRANTY Consequential and incidental damages, including without limitation, loss of property and
those arising from breach of any express or implied warranty, are not the responsibility of James Products Limited
and to the extent permitted by law, are excluded.
In accordance with its policy of progressive product design, James Products Ltd reserves the right to change
product specifications without prior notice.
*Repair or replacement is at the discretion of the manufacturer.
Registered in England No. 5250754
Registered Oce: James Products Ltd, Church Close Business Park, Todber, Sturminster Newton, Dorset DT10 1JH, England
www.jamesproducts.co.uk
SPECIFICATIONS
Description Professional Ultrasonic Cleaner
Model 9050 TOUCH
Tank Capacity 7.5 L / Max. 6.0 L / 1.6 gallon (US)
2.0 gallon (US) Min. 4.3 L / 1.1 gallon (US)
Tank Size 33.1 x 23.8 x 10.5 cm / 13.0” x 9.4” x 4.1”
Longest Item Fits inside Tank 37.0 cm / 14.4”
Power Supply 410 W (AC 220~240V 50/60Hz)
Digital Timer Settings 10min 15min 20min 25min 30min 5min
Drainage Drainage valve
Ultrasonic Frequency 35,000 Hz
Tank Material Stainless Steel SUS304
Housing Material ABS
Net Weight 9.8 kg / 21.8 lb
Gross Weight 11.1 kg / 24.7 lb
Unit Size 54.1 x 33.7 x 27.7 cm / 21.3” x 13.3” x 10.9”