Jason.L San Fran System 2 Person Workstation User manual

INSTALLATION GUIDE
San Fran System
2 Person Workstation
Size: 1800mm
Tools Required: Power screwdriver.
Special Note: No pre-drilled holes or nut inserts are provided.
Wood screws will be required to be drilled directly into underside of desk top.
Page 1 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au

Leg x4
Adjustable Foot x4
Leg Cable Cover x4
Rail Lengths x2 (1290mm)
Rail Widths x2 (620mm)
2 Way Connector x4
2 Way Connector Cap x4
Slot Nut x4
Table Top x2 (1800x800mm)
Support Connector x4
1
2
3
4
5
6
7
8
9
10
M8x20mm Dome Head x8
M8x12mm Dome Head x4
M8x20mm Cap Head x4
M5x20mm Self Tapping x12
11
12
13
14
COMPONENTS
SCREWS
Page 2 of 4
INSTALLATION GUIDE
San Fran System
2 Person Workstation
Size: 1800mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au
9
5
3
1
2
6
7
10 4
11
812
13

01 02
03 04
Slide the 2 way connectors over each leg, and securely lock into place using
M8x20mm cap head bolts.
Loosely connect the shorter M8x12mm dome head bolt and slot nut through the
metal rail spacer bracket. Slide onto 620mm rails and 1290mm.
Securely connect legs to rails lenghts using the shorter M8x20mm dome head
bolts.
Ensure the worksurface is centered over the frame. Fully tighten all M5x20mm self
tapping screws through each leg and support bracket into the worksurface.
Page 3 of 4
INSTALLATION GUIDE
San Fran System
2 Person Workstation
Size: 1800mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au

Conceal any power cable using the magnetic leg cable covers.
Page 4 of 4
05
INSTALLATION GUIDE
San Fran System
2 Person Workstation
Size: 1800mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au