Jason.L Literail Workstation 6 Person User manual

ASSEMBLY INSTRUCTIONS
Literail Workstation
6 Person
Size: 1600mm
Tools Required: Power screwdriver.
2 persons required for installation
Special Note: No pre-drilled holes or nut inserts are
provided. Wood screws will be required to be drilled
directly into underside of desk top.
Page 1 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au

Screen x3 (1600mm)
Desk legs x4
Desk leg foot insert x8
Desk top x6 (1600mm x 800mm)
Beams x6
Rod Brackets x6
2 Way connector rod x2
1
2
3
4
5
6
7
25mm Woodscrews x968
COMPONENTS
SCREWS
Page 2 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au
ASSEMBLY INSTRUCTIONS
Literail Workstation
6 Person
Size: 1600mm
4
1
3
2
5

Attach the top plates to the legs.
Page 3 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au
ASSEMBLY INSTRUCTIONS
Literail Workstation
6 Person
Size: 1600mm
Use the beams to connect the legs.
02
Attach legs + beams to Desks Top by tightening Screws.
01
03

Page 4 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au
ASSEMBLY INSTRUCTIONS
Literail Workstation
6 Person
Size: 1600mm
04
Place screens in the gap, aligned with desk tops. Place 10mm Rod Brackets into designated screen holes.
Drill desk tops with H6x30 screws to assemble the screens.
08
Using an Allen key remove top 2 caps
from all screens uprights. Bring two
partition towards one another and
slide the 2 way connector rod - down
between the two screen uprights.
0605