Jason.L Horizon Workstation 4 Person User manual

ASSEMBLY INSTRUCTIONS
Horizon Workstation
4 Person
Size: 1800mm
Tools Required: Power screwdriver.
2 persons required for installation
Special Note: No pre-drilled holes or nut inserts are
provided. Wood screws will be required to be drilled
directly into underside of desk top.
Page 1 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au

Screen x2 (1800mm)
Desk legs x6
Desk leg foot insert x12
L-Shaped post bracket x4
Desk top x4 (1800mm x 800mm)
Cantilever brackets x8
1
2
3
4
5
6
25mm Woodscrews x647
COMPONENTS
SCREWS
Page 2 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au
ASSEMBLY INSTRUCTIONS
Horizon Workstation
4 Person
Size: 1800mm
5
1
2
3
4
6

Attach the top plates to the outside legs.
Page 3 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au
ASSEMBLY INSTRUCTIONS
Horizon Workstation
4 Person
Size: 1800mm
Build the 4 outside legs with 1 cantilever bracket attached to each leg.
03
Build the centre legs with 2 cantilever brackets attached to each side
(for 2 person run or more).
02
01
Using an Allen key remove top 2 caps from all screens uprights. Bring two
partition towards one another and slide the 2 way connector rod - down
between the two screen uprights.
04

Page 4 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au
ASSEMBLY INSTRUCTIONS
Horizon Workstation
4 Person
Size: 1800mm
Attach desktops to the legs.
05
06
Use l-shaped panel bracket to secure the screen to
the desktop by placing the bracket in the middle of
the screen and under the desktop.