Jason.L Sapphire Disc Round Base Table User manual

Need help!
Call us on
1300 527 665
www.jasonl.com.au
ASSEMBLY INSTRUCTIONS
Sapphire Disc
Round Base Table
Page 01
Note: Please ignore any pre-drilled holes or nut inserts that maybe present in your top(s). They will not match your particular
table/desk base and woods screws will be required to be screwed directly into the underside of the top.
Note: It is important to fully tighten all bolts and screws before attaching the top(s) so that the frame is suciently rigid.
Failure to do this may aect stability once the tops are attached.
Tools Required: Power screwdriver. We strongly recommend using an impact drill gun together with thread locking all screws.

Need help!
Call us on
1300 527 665
www.jasonl.com.au
ASSEMBLY INSTRUCTIONS
Sapphire Disc
Round Base Table
STEP 2STEP 1
Page 02
A * 1 B * 1
C * 1
G * 8 woodscrews
D * 3 (M8*30mm)
E * 3 (M8*30mm) F * 1

Need help!
Call us on
1300 527 665
www.jasonl.com.au
ASSEMBLY INSTRUCTIONS
Sapphire Disc
Round Base Table
STEP 3
Page 03
STEP 4
Adding the Top
Screw the table top through the
square top plate using woodscrews
(G*8 wood screws) through the
following holes.
Ask a second person to help to
turn the table and base over.
Careful: tables are heavy.
G